
F AB GLASS
AND MIRROR
Fab Glass Rectangle Shelf
Installation Manual
www.fabglassandmirror.com Call: +1 888-474-2221 Fax: (614)-334-4919
Office Timing: 8:30 - 18:00 EST info@fabglassandmirror.com

Drill/Driver Level Tape Measure Screw Driver Hammer Lead Pencil
Thank you for your purchase! It is our desire to make your entire experience from
purchase to installation as easy as possible. We ask that you read each step of this
installation manual thoroughly to ensure proper installation of your new Shelf. Our
installation techniques are very important. Installing your Shelf in any manner other
than the steps outlined in this manual may lead to structural failure of your Shelf.
It is your responsibility to see that your FabGlass Rectangle Shelf is properly assembled,
installed, and cared for. Failure to follow instructions in this manual could result in
serious injury. - use this product with Shelf cautions.
REQUIRED AND RECOMMENDED TOOLS
HARDWARE INCLUDED PER YOUR ORDER
CAUTION
Bracket
(Lower Part)
Bracket
(Upper Part)
Anchor
(Qty - 4/6)
Screw
(Qty - 4/6)

1
2
3
4
Take your Rectangle
Shelf out of the
packaging.
Place Shelf on wall
you want to install
and mark two holes
upper side of shelf.
Now remove Shelf
and drill the marked
holes by drill machine.
After drilling insert
anchor in both holes
by using hammer.
1
Page
www.fabglassandmirror.com
+ 1 888-474-2221
Fragile Handle with care
FRAGILE
GLASS
FAB GLASS
AND MIRROR
Glass Shelf

5
6
8
Now place the bracket
upper part on anchor
and insert screw
through it’s hole.
Insert the bottom
part of bracket, Tight
the screw with
some space.
Insert the shelf and
fully tight the screws
and make sure that
brackets tightly grip
with shelf.
Congratulations!
You have successfully installed
your Rectangle Shelf.
2
Page
Don’t tight up
keep it loose.
7
Now Tight the
screw fully.