Faber SCIR3014SS Specifications

Scirocco Plus 14” Rise

a new disappearing downdraft

Integrated Collection

14” tall downdraft vent system

°

pops up and down with push of button

°

flush with cooktop in down position

°

safety microswitches

°

multiple venting options

°

500 cfm internal blower option

°

900 / 1200 cfm remote blower option

°

variable speed control slider

°

dishwasher safe grease filters

°

stainless steel trim with no logo

°

reversible motor box

°

sone range: 3.5 - 6.5

°

6” duct (internal)

°

10” round duct (remote)

°

Size/Color/Model #

30 SS
36 SS
500 CFM Internal Blower
900 CFM Remote Blower
1200 CFM Remote Blower

SCIR3014SS
SCIR3614SS

IB500

RBORIG900

RBORIG1200

With a reversible motor box, the new
14” rise Scirocco Plus can fit behind a

range top, cook top or range.

Rising a full 14” above the cooktop, the Scirocco Plus vents
horizontally across the cooking surface and down through the
exhaust vent. At the press of a button, the stainless steel Scirocco
Plus retracts back down into the counter.

Momentary delay up/down
button prevents the unit
from raising or lowering
when cleaning the top trim.

Up / down motor on 14”
rise range hood stops
automatically if an object or
finger obstructs its path.

Safety microswitches on the
grease filters prevent the
Scirocco Plus from lowering
when grease filters are not
installed.

p.o. box 435 • Wayland, MA 01778 • tel: [phone] • fax: [phone] • e-mail: [e-mail] • www.faberonline.com

Dimensional Diagrams

Top trim widths:
30" (762 mm) vent
36" (914 mm) vent

14 " (357 mm)

retractable
vent height

27" (686 mm) for 30" (762 mm) vent
33" (838 mm) for 36" (914 mm) vent

13" (330 mm)

10 "

(254 mm)

21⁄8 " (54 mm)

283⁄4"

(730 mm)

3⁄8 " (9.5 mm)

11⁄2 " (38 mm)

13" (330 mm)

Terminal box cover

6" (152 mm)

diameter

vent collar

x

30”

36”

30

36

FRONT

BACK

Note: Overall dimensions show unit with
internal blower box attached. Remote
Blower would only have a vent collar
attached instead of the 13” x 13” box shown.
X = Distance to the rear of the cabinet
or wall. Must be a minimum of ½”.

When mounted on the front of the hood, the
Internal blower box can be rotated to vent
left, right, down or thru the hood to the rear
of the unit. When mounted on the back of the
hood, the blower can be vented left, right or
down. The remote blower venting can come
out the front or back of the unit venting
down.

Cutout Dimensions

Remote Blower ducting cut out hole

Product Side View
(motor on the front and back)

Behind a Cooktop Behind a Cook top,

Range top or Range

WARNING! You must know the cook top cutout to determine the
downdraft cutout. Consult the cook top manufacturer’s installation
instructions before cutting the counter top.

WARNING! Product specications are subject to change without notication. Consult the installation instructions for

both the remote blower and the ventilation system before you begin installing this rangehood.

Rev. 07/12