Faber RB1200, RB900 Transition Guide

Faber Downdraft Transition Guide sheet – Spring 2017

Buy one of these Downdrafts :

SCLX3015BKNB-B
SCLX3615BKNB-B

SCLX3015SSNB-B

SCLX3615SSNB-B

IBDD600-B

Use one

of these

blowers :

Install
Notice

*This is where you removed the

mounted on the front of the

downdraft to vent thru the back

*This type of

install will not be

available with

the new

IBDD600-B

blower from the box and

* Do you have questions, or just need more
information? If so, turn over or see page 2 *

RB900 / RB1200

WIREBOXSCLX
(required w/ RB)

+

Buy one of these Downdrafts :

SCIR3014SSNB-B
SCIR3614SSNB-B

Use one
of these

blowers :

Buy one of these Downdrafts :

Use one of
these
blowers :

IBDD600-B

RB900
RB1200

SCIR3014SS
SCIR3614SS

IBDD600

OR
IBDD600-B with Service Part
#133.0491.810 Connector 6/9
Pole

RB900
RB1200

Faber Downdraft Transition FAQ’s

If I want to use the new Internal Blower with the previous Scirocco Plus Downdraft what do I do?

Order the IBDD600-B and the Service Part 9-6 Pole Connector (#133.0491.810)

What if I have the previous Scirocco Plus installed and I need to replace the blower ?

If we are out of stock on the previous IBDD600, then order the new IBDD600-B and the Service Part 9 - 6 Pole

Connector (#133.0491.810)

What if I want to use the previous IBDD600 with the new Updated Scirocco Plus Downdraft (-NB) ?

This is NOT an approved downdraft and blower combination.

Why did you change to the new model number IBDD600-B ?

There are two main changes that required us to add the –B.
A change to a 9-Pole Connection from a 6-Pole Connection required to work with the (–B) Downdrafts new control.

This will allow for future software updates and was needed to conform with new Energy Regulations. Plus, the

blower has new improved fastening mounts to the metal motor box.

Why did you change the model number on the new Scirocco Plus Downdraft?

We needed to upgrade our control board to allow for software updates that meet energy regulations. The Control
Board was modified to accept these changes and a more reliable electronic transformer. The model number now
indicates “NB” aka “No Blower”.

What is the Venting Option that is being discontinued - see page 1 “Install Notice”?

With the improved blower connection on the new IBDD600-B blower you cannot remove it from the metal
attachment box. The previous IBDD600 could be mounted directly to the front of the downdraft and vented
backwards thru the unit. This option has been removed.

All other motor options remain the same.

What is this new WIREBOXSCLX accessory listed for the Scirocco Lux?

This is a new accessory for use with the new Scirocco Lux that is needed to connect the Remote Blower
and is required by UL for safety reasons.

WIREBOXSCLX

IBDD600

IBDD600-B

133.0491.810