Faber ORIZ36SS Specifications

Orizzonte Wall Range Hood

Luxurious stainless wall hood with advanced features

LED Electronic Controls

The Orizzonte wall hood features an angled stainless steel panel with state of the art LED push button controls
and the innovative perimetric suction system to decrease sound and improve efficiency.

Model # Size | Color Performance Range Sound Levels

ORIZ36SS

36 Stainless

60 - 600 CFM

0.5 - 5.0 sones

Feature Chart

Min. / Max. Ceiling Height (Ducted) 7’ 10 3/16” - 8’ 9 3/16”

Min. / Max. Ceiling Height (Ductless)

High Ceiling Kit Yes - up to 10’ 8 1/16”

Convertible to Ductless / Recirculating Yes - ductless kit needed

Controls 4 speed LED digital control

Lighting 2 X 20 (W) Halogen + Dimmer

Ducting Top 6” Round

Grease Filters dishwasher safe mesh

Pro Motor with Metal Impellers Yes

Perimetric Suction System / Silent Kit Yes

24 hour anti-pollution mode Yes

30 minute auto shut off Yes

Grease Filter Wash indicator Yes

10 Minute Intensive Speed Yes

8’ 3 3/16” - 8’

9 3/16

”

AC Input 120 V - 60 hz

AC Power Max 370 W at 3.1 A

Green Energy Saver Mode Yes

Annual Electricty Costs $6.17 / Year *

* Note – ran 30 minutes a day on low speed with the lights on, 365 days, using the North American average of 12.2 cents per kWh.

p.o. box 435 • Wayland, MA 01778 • tel: [phone] • fax: [phone] • e-mail: [e-mail] • www.faberonline.com

Dimensional Diagrams

(see installation instructions for more information)

Ducted

Ductless

MIN. 26 3/8" - MAX. 37 3/8"

min & max ceiling height examples

x = range hood height above cook top

Ducted Ductless

x = 18"

min

7' 10 3/16"

max

8' 9 3/16"

x = 18"

min

8' 3 3/16"

max

8’ 9 3/16”

MIN. 32" - MAX. 37 3/8"

ACCESSORIES

High Ceiling Kit

One 39” upper chimney to replace 16 1/8”

upper chimney that came with hood

Ductless Conversion Kit # DUCT1

Includes: • Lower Chimney with holes
for ducting • Ductless Diverter Assembly

• Vent Grates • Charcoal Filter

Universal Make-Up Air Damper

Satisfies current make-up air requirements, this kit uses an air switch above the hood to
activate the make-up air damper to open and bring fresh air into the home whenever the
hood fan is operating and then close tightly when the hood is off. The CFM level is not
reduced by using this kit.

# HIGH1

Cfm Reducer Kit

Converts CFM to below 300 for make up air

environments

Replacement Charcoal Filter # FILTER2

Remote Control # REMCTRL

wireless remote control to
operate all hood functions

# MUDAMPER6 / MUDAMPER8

# CFMRED

(6”) (8”)

WARNING! Product specifications are subject to change without notification. Consult the installation instructions before you begin installing this rangehood.

Rev. 3/15