FAB Defense VFR-AK User Manual

VFR-AK

AK-47 Handguard

Installation Instructions

WARNING!

Make sure your Rifle is unloaded before you begin any procedures.

Rifle Disassembly (Fig. 1)

1Fig.

Gas Tube and Handguard removal

Gas Tube Retaining Lever

Fig. 2

Rotate the Gas Tube Retaining Lever upward until the Gas Tube can be
pulled upward at the back, and off the rifle (Fig. 2).

3Fig. 4Fig.

Using a wrench or a bench vise, gently lock across the flat side portions in
back of the Gas Tube. Grab the Handguard firmly and rotate it around the Gas
Tube axis until it is completely upside-down. Push straight down and off the
Gas Tube (Fig. 3,4).

- 2 -

Handguard Locking Lever

Fig. 5

Release the Handguard Locking Lever and remove the Lower Handguard (Fig. 5).

VFR-AK Handguard Installation

3 mm Alen Wrench 2.5 mm Alen Wrench

Tорцевой ключ 3 мм

Fig. 6

Step 1. Remove the screws with appropriate Allen wrenches and separate
the Upper Handguard from the Lower one (Fig. 6).