FAB Defense SSR-25 User Manual

SSR-25

SR-25 Sniper Buttstock

Fig. 1

1. 4 mm Alen Key

2. 2.5 mm Alen Key

3. Buffer Tube Screw

4. Monopod Spring

1

2

3

4

25 -Mounting Your Sniper Buttstock SSR

Step 1. Using the 2.5 mm Alen Key (2)

release the Rear Screw (Fig 2).

Fig. 2

Step 2. Pressing the Cheek-Rest Button (a)

slide up and remove the Cheek Rest (Fig 3).

Fig. 3

Attention! The Cheek-Rest Button is spring loaded!

Don’t remove your finger from the Button until the
Cheek Rest is safely off the Buttstock.
Slowly reduce the pressure from the Cheek -Rest Button.

Step 3. Pressing the Monopod Release Button (b),

extract the Monopod Rod (c) and insert the
Monopod Spring (4) as shown in Fig 4.

Fig. 5

b

b

4

Attached parts

Step 4. Slide the Buttstock on the Buffer Tube (d)

and tighten Buffer Tube Screw (3) using the
4 mm Alen Key (1) as shown in Fig 5.

3

Fig. 4

d

c

1

a

2