FAAFTECH INSTALLATION MANUAL Installation Manual

Installation Manual

For your safety and comfort, read this manual carefully.

FT-VF-HND3

REV 060717

Installation chart

Plug in to the original whip

Scan this QR code to see which

vehicles are compatible.

TECHNICAL SUPPORT

0800 603 2330 or (62) 3241-4600

[e-mail]

www.faaftech.com.br

Available from Monday to Friday, from 8 a.m. to 6 p.m. Brasilia time

Plug in to the multimedia

Follow us on social media!

ORIGINAL

MULTIMEDIA

FT-VF-HND3

GND

Plug in to the IR input on Faaftech’s TV-1SEGII

IR-TV

or TV-HD2. This will enable the channel switch
through the steering wheel commands.

ACC

ACC and GND outputs to power the mirroring module.

Note: ACC output has a low current. Use it only to power the
mirroring or the Digital TV module, we do not recommend its
usage to power any other accessories.

AV Input

Entrada AV

ORIGINAL

MULTIMEDIA

AV input: use it to connect a TV
or screen mirroring module

Steering Wheel Commands

If you have installed a Faaftech Digital TV on the radio’s AV input, you can switch channels by using the steering wheel com­mands, as shown on the picture below:

Press for 1 second: Channel -

Press for 1 second: Channel +
Press for 3 seconds: SCAN