FAAFTECH FT-VF-HY3 Installation Manual

Installation Manual

For your safety and comfort, read this manual carefully.

FT-VF-HY3

Scan this QR code to see which

vehicles are compatible.

REV 130617

TECHNICAL SUPPORT

0800 603 2330 or (62) 3241-4600

[e-mail]

www.faaftech.com.br

Available from Monday to Friday, from 8 a.m. to 6 p.m. Brasilia time

Installation chart

Plug in to the original whipPlug to the multimedia

Plug to the multimedia Plug in to the original whip

Follow us on social media!

FT-VF-HY3

ACC

GND

ACC and GND output, use this to power
the installed accessory (TV, DVD or mirroring)

IR-TV

Connect to the Digital TV’s IR input

Available only for the Faaftech FT-TV-1SEGII or the FT-TV-HDII TVs

Auxiliary AV Input

Use the P3/RCA cable to connect an accessory on the multimedia’s auxiliary input.

Connect to the
console’s auxiliary input

AV input, connect a

Digital TV or a mirroring

TV Commands VIDEO WHILE MOVING

If you are using a Faaftech Digital TV, models FT-TV-1SEGII or
FT-TV-HDII, you can use the steering wheel commands to
switch and search channels (scan).

Check below the available commands on the Steering Wheel.

This device has an option for you to turn the USB video on or off
while the vehicle is moving.

Use the “Reject Call” button on the steering wheel to toggle this
function on or off. To do so, press and hold this button for three
seconds.

Use this function in case the video while moving is interfering
with any application installed, or with some function on the
multimedia.

Press for 1 second: Channel +

Press for 3 seconds: SCAN

Reject Call button on the steering wheel

Press for 1 second: Channel –

Important Notice:

Video visualization is strictly forbidden to the vehicle’s driver. The
visualization of video is reserved only to the passengers in the
vehicle. FAAFTECH holds no responsibility over eventual damaged
caused by the poor usage of this function.