Ezviz OutPro User guide

Page 1

COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user manual (hereinafter referred to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees or representations, express or implied, regarding to the Manual.

About this Manual

The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the ™ website (http://www.ezvizlife.com).

Revision Record

New release – January, 2021

Trademarks Acknowledgement

™, ™, and other EZVIZ’s trademarks and logos are the properties of

EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT. EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG OTHERS. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Page 2

Table of Contents

Overview..........................................................2

1. Package Contents............................................................................2

2. Basics..............................................................................................2

Get the EZVIZ App.............................................3

Connect to the Internet.....................................3

1. Option A: Wired Connection...............................................................3

2. Option B: Wireless Connection...........................................................4

Installation.......................................................5

1. Micro SD Card Installation (Optional)................................................5

2. Installation Location.........................................................................6

3. Installation Procedure.......................................................................6

Operations on the EZVIZ App............................7

1. Live View..........................................................................................7

2. Settings............................................................................................8

3. Video History..................................................................................9

4. Speak.............................................................................................9

5. Intelligent Human Detection............................................................10

6. Active Defense................................................................................10

EZVIZ Connect................................................11

1. Use Amazon Alexa...........................................................................11

2. Use Google Assistant......................................................................12

FAQ................................................................12

Page 3

Overview

1. Package Contents

Camera

Drilling Template Waterproof Kit Screw Kit

Power Adapter Regulatory Information Quick Start Guide

The power adapter's appearance is subject to the one you have bought.

2. Basics

MIC

Micro SD Card Slot

RESET Button

Antenna

Speaker

Ethernet Port

Power Port

Adjusting Screw

Page 4

Spotlight

Lens

IR Light

LED Indicator

LED Indicator Spotlight

Spotlight

Name Description

RESET

RESET Button

Button

LED

LED Indicator

Indicator

Get the EZVIZ App

1. Connect your mobile phone to Wi-Fi (suggested).

2. Download and install the EZVIZ app by searching for “EZVIZ” in the App Store

2. Download and install the EZVIZ app by searching for “EZVIZ” in the App Store or Google PlayTM.

or Google PlayTM.

3. Launch the app and register an EZVIZ user account.

When the camera is working, press and hold for about 4s until the LED

When the camera is working, press and hold for about 4s until the LED indicator is solid red, and all parameters will be restored to default

indicator is solid red, and all parameters will be restored to default settings.

settings.

Solid Red: Camera starting up.

Slow-flashing Red: Network exception.

Fast-flashing Red: Camera exception (e.g. Micro SD card

Fast-flashing Red: Camera exception (e.g. Micro SD card error).

error).

Solid Blue: App visiting camera.

Slow-flashing Blue: Camera running properly.

Fast-flashing Blue: Camera ready for Wi-Fi connection.

EZVIZ App

If you have already used the app, please make sure that it is the latest version. To find

If you have already used the app, please make sure that it is the latest version. To find out if an update is available, go to the app store and search for "EZVIZ".

out if an update is available, go to the app store and search for "EZVIZ".

Connect to the Internet

• Wired Connection: Connect the camera to a router. Refer to Option A.

• Wireless Connection: Connect the camera to Wi-Fi. Refer to Option B.

1. Option A: Wired Connection

1. Connect the power adapter cable to the camera’s power port.

2. Plug the power adapter into an electrical outlet.

• Use power adapter and power cable come with the camera in the box.

• The LED turning fast-flashing blue indicates that the camera is powered on and ready

for network configuration.

3. Connect the camera to the LAN port of your router with the Ethernet cable

3. Connect the camera to the LAN port of your router with the Ethernet cable (purchase separately).

(purchase separately).

The LED turning slow-flashing blue indicates that the camera is connected to the

The LED turning slow-flashing blue indicates that the camera is connected to the Internet

Internet

Page 5

Router

Outlet

Power Adapter

DC12V 1A

4. Add your camera to EZVIZ.

- Log in to your account using the EZVIZ app.

- On the Home screen, tap “+” on the upper-right corner to go to the Scan QR

Code interface.

- Scan the QR code on the Quick Start Guide cover or on the body of the camera.

Scan QR Code

- Follow the EZVIZ app wizard to add the camera to the app.

2. Option B: Wireless Connection

1. Connect the power adapter cable to the camera’s power port.

2. Plug the power adapter into an electrical outlet.

• Use power adapter and power cable come with the camera in the box.

• The LED turning fast-flashing blue indicates that the camera is powered on and ready

for network configuration.

Outlet

Power Adapter

DC12V 1A

Page 6

3. Add camera to EZVIZ.

- Log in to your account using the EZVIZ app.

- On the Home screen, tap “+” on the upper-right corner to go to the Scan QR

Code interface.

- Scan the QR code on the Quick Start Guide cover or on the body of the camera.

Scan QR Code

- Follow the EZVIZ app wizard to add the camera to EZVIZ.

• Please choose to connect your camera to the Wi-Fi to which your mobile phone has connected.

• The band of the Wi-Fi must be 2.4 GHz.

Press and hold the reset button for about 4s, and you can restart the camera and restore all parameters to default. Press and hold the reset button for about 4s in any of the following cases:

• The camera fails to connect to your Wi-Fi network.

• You want to connect the camera to another Wi-Fi network.

Installation

1. Micro SD Card Installation (Optional)

1. Remove the cover on the camera.

2. Insert the micro SD card (sold separately) into the card slot.

3. Place the cover back on.

After installing the micro SD card, you should initialize the card in the EZVIZ app before using it.

4. In the EZVIZ app, tap the Storage Status in the Device Settings interface to check the SD card status.

5. If the memory card status displays as Uninitialized, tap to initialize it.

The status will then change to Normal and then videos can be stored.

Page 7

1. Installation Location

• Choosealocationwithaclear,unblockedeldofviewandwithagoodwireless

signal.

• Make sure the wall is strong enough to withstand three times the weight of the camera.

• Camera cannot be installed with the lens facing direct sunlight.

2. Installation Procedure

1.Removetheprotectivelmfromthelens.

2.Stickthedrillingtemplateontoacleanandatsurface.

3. (For cement wall only) Drill screw holes according to the template, and insert

anchors.

4.Usescrewstoxthecameraontheinstallationsurface.

5. Loosen the adjusting screw.

6. Rotate the upper part of the camera to get an appropriate detection angle.

7. Tighten the adjusting screw again.

Drilling Template

Anchor

Adjusting Screw

Camera

Screw

0～90°

0～360°

Page 8

Operations on the EZVIZ App

The app interface may be different due to version update, and the interface of the app you installed on your phone shall prevail.

1. Live View

When you launch the EZVIZ app, the device page displays as shown below. You can watch a live feed, take snapshots, record videos, or choose video definition as needed.

Swipe left and right across the screen to see more icons.

Icon Description

Share. Share your device with anyone you want.

Settings. View or change the device settings.

Video History. View Recordings.

Snapshot. Take a snapshot.

Record. Manually start/stop recording.

Speak. Press and hold to talk to people in front of the camera.

Active Defense. Sound the alarm to deter intruders.

Definition. Select video resolution from Ultra HD, Hi-Def or Standard.

Multi-screen Live. Tap to select live view window layout.

Page 9

2. Settings

Parameter Description

Audio

Status Light

Alarm Notification

Night Vision Mode

Time Zone You can select time zone as needed here.

Date Format You can select date format as needed here.

Wi-Fi

Cloud Storage You can subscribe and manage the cloud storage.

Storage Status

Device Version You can see device version here.

Image Encryption

Change Encryption Password

Flip Image Tap to flip the video.

Sleep Mode If enabled, the device will stop monitoring and recording.

Offline Notification

User Guide You can read user guide of the camera here.

About

Restart Tap to restart the camera.

Delete Device Tap to delete the camera from EZVIZ cloud.

If disabled, there will be no audio when you are viewing realtime videos or recorded videos.

If enabled, the LED indicator on the camera will be on; otherwise the LED indicator will not be on.

If disabled, notifications will not be pushed to your app once targets are detected.

• Color Night Vision: Helps the camera get color images in dark environments.

• Black/White Night Vision: IR light helps the camera get black

and white images in dark environments.

• Smart Night Vision: Black/White Night Vision by default. Once motion is detected, the vision mode will switch to Color Night Vision mode.

Make your device offline first, and then you can connect your device to a new network.

You can see micro SD card capacity, used space and free space here.

If enabled, images captured by the camera can only be avaliable after you enter a password.

You can change encryption password here.

If enabled, notifications will be pushed to your app once the camera is offline.

You can mark where the device is installed, and get product category, device model, serial number, and device QR code here.

Page 10

3. Video History

The camera supports both local storage and cloud storage.

Tap Video History button on the device page, then you can use the calender and timeline to find and watch specific recordings.

4. Speak

This function allows the camera to receive and transmit audio.

Tap the Speak button on the device page, then you can talk to people that are in front of the camera.

Page 11

5. Intelligent Human Detection

Go to Settings - Intelligent Human Detection and enable it. Then EZVIZ will send you notifications when a human is detected.

To let the camera respond differently in different situations, you can customize the detection notification by changing the value of detection sensitivity. The higher sensitivity is, the easier people farther to the camera can be detected.

6. Active Defense

With intelligent human detection enabled, alarms will automatically be triggered and videos will be recorded once human or animal is detected. Alarm stops until no motion is detected.

In addition, you can also tap the Active Defense button on the device page to trigger an alarm. The camera will sound an alarm and the spotlight will flash quickly to deter intruders, which can last up to one minute.

Page 12

EZVIZ Connect

1. Use Amazon Alexa

These instructions will enable you to control your EZVIZ devices with Amazon Alexa. If you run into any difficulties during the process, please refer to Troubleshooting.

Before you start, make sure that:

1. EZVIZ devices are connected to the EZVIZ app.

2. In the EZVIZ app, turn off the "Image Encryption" in the Device Settings page.

3. You have an Alexa-enabled device (i.e Echo Spot, Echo-Show, All-new EchoShow, Fire TV (all generations), Fire TV stick (second generation only), or Fire TV Edition smart TVs).

4. The Amazon Alexa app is already installed on your smart device, and you have created an account.

To Control EZVIZ devices with Amazon Alexa:

1. Open the Alexa app and select "Skills and Games" from the menu.

2. On the Skills and Games screen, search for "EZVIZ", and you will nd "EZVIZ" skills.

3. Select your EZVIZ device's skill, then tap ENABLE TO USE.

4. Enter your EZVIZ username and password, and tap Sign in.

5. Tap the Authorize button to authorize Alexa to access your EZVIZ account, so that Alexa can control your EZVIZ devices.

6. You will see "EZVIZ has been successfully linked", then tap DISCOVER DEVICES to allow Alexa to discover all your EZVIZ devices.

7. Go back to Alexa app menu and select "Devices", and under devices you will see all your EZVIZ devices.

Voice Command

Discover a new smart device via the "Smart Home" menu in the Alexa app or the Alexa Voice Control function.

Once the device is found, you can control it with your voice. Speak simple commands to Alexa.

Your device's name for example: "show xxxx camera," can be changed in the EZVIZ app. Each time you change the name of the device, you will need to discover the device again to update the name.

Troubleshooting

What should I do if Alexa fails to discover my device?

Check if there are any Internet connecting problems. Try to restart the smart device and re-discover the device on Alexa.

Whythedevice'sstatusis"Ofine"onAlexa?

Your device might have been disconnected from the network. Restart the smart device and re-discover on Alexa.

Check if your router is connected to the Internet and try again.

For details about countries where Amazon Alexa is available, see Amazon Alexa's official website.

Page 13

2. Use Google Assistant

With the Google Assistant, you can activate your EZVIZ device and watch live by speaking Google Assistant voice commands.

The following devices and apps are required:

1. A functional EZVIZ app.

2. In the EZVIZ app, turn off the "Image Encryption" and turn on the "Audio" in the Device Settings page.

3. A TV with functional Chromecast connecting to it.

4. The Google Assistant app on your phone.

To get started, follow the steps below:

1. Set up the EZVIZ device and make sure it works properly on the app.

2. Download the Google Home app from the App Store or Google Play StoreTM and log into your Google account.

3. On the Myhome screen, tap “+” on the upper-left corner, and select "Set up device" from the menu list to go to the Set up interface.

4. Tap Works with Google,andsearchfor"EZVIZ",whereyouwillnd"EZVIZ" skills.

5. Enter your EZVIZ username and password, and tap Sign in.

6. Tap the Authorize button to authorize Google to access your EZVIZ account, so that Google can control your EZVIZ devices.

7. Tap Return to app.

8. Follow the above steps to complete the authorization. When synchronization is completed, EZVIZ service will be listed under your list of services. To see a list of compatible devices under your EZVIZ account, tap on the EZVIZ service icon.

9. Now try some commands. Use the name of the camera that you created when you set up the system.

Users can manage devices as a single entity or in a group. Adding devices to a room allows users to control a group of devices at the same time using one command.

See the link for more information:

https://support.google.com/googlehome/answer/7029485?co=GENIE. Platform%3DAndroid&hl=en

Page 14

FAQ

Q: If the camera is offline on the App, will the video recording continue?

A: If the camera is powered on but disconnected from the Internet, then

local recording will continue but cloud recording will stop. If the camera is powered off, both video recordings will stop.

Q: Why the alarm is triggered when nobody in the image?

A: Configure a lower value for the detection sensitivity. Please notice that

vehicle and animals are also alarm triggering sources.

Q: How to use the microSD card for local storage?

A: 1. Make sure that there is a micro SD card inserted and that the camera is

added to your EZVIZ account. Open the EZVIZ app and enter the “Device Details” interface, if the “Initialize Storage Card” button appears, you need to initialize the micro SD card first.

2. The micro SD card recording for the motion detection is enabled by default.

Q: The mobile phone cannot receive alarm prompts when the camera is

online.

A: 1. Make sure that t he EZVIZ app is running on your mobile phone and that

the Motion Detection Notification is enabled.

2. For Android system, make sure the app is running in background; and for iOS, enable the message push function in “Settings > Notification”.

3. If still no alarm prompts, press and hold the RESET button for about 4 seconds restore the camera settings.

Q: Live view or playback failed.

A: Make sure that your network is well connected. Watching live videos needs

a good bandwidth. You can refresh the video, or change a network and try again.

For additional information about the device, please refer to www.ezviz.eu.