Ezviz Mini 360 Plus User Manual

UD04014B

EN

ES

FR

Mini 360 Plus

Setup

Step 1 Power-on

Plug the power cable into the camera, and then plug the power adapter into an outlet as shown in
the figure below. The LED indicator will flash red and blue when the camera is ready for setup.

Power Interface

Power Outlet

Power Cable

LED Indicator Status

Blue Flicker: The network is properly connected.

LED Indicator

Turn on the Mini 360 Plus and let it power up. The camera will completely rotate side­to-side and tilt up-and-down once.

Solid Red: The device is activating.
Slow Red Flicker: Invalid network connection.
Fast Red Flicker: MicroSD card or other error
occurred.

Alternating Blue and Red Flicker: Camera is ready
for Wi-Fi setup.

1

EN