The Manual includes instructions for using and managing the product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information contained
in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please
find the latest version in the
Revision Record
New release – January 2022
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of EZVIZ in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH
THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL
LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS
THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER
INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR
PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT
LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG
OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK,
VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION
LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION
BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE
APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER
PREVAILS.
1� Get the EZVIZ App ���������������������������������������������������������������������������������������������������������������������������������������� 3
2� Power on the camera ������������������������������������������������������������������������������������������������������������������������������������ 3
3� Add Camera to EZVIZ������������������������������������������������������������������������������������������������������������������������������������ 4
Camera Installation ����������������������������������������������������������������������������������4
1� Use Amazon Alexa �������������������������������������������������������������������������������������������������������������������������������������� 10
2� Use Google Assistant ��������������������������������������������������������������������������������������������������������������������������������� 11
LED IndicatorSolid Blue: Camera starting up or being live viewed in the EZVIZ app.
Fast-flashing Blue: Camera ready for Wi-Fi configuration.
Slow-Flashing Blue: Camera working properly.
Slow-flashing Red: Network exception.
Fast-flashing Red: Camera exception.
Solid Green: Camera fully charged.
Slow-flashing Green: Charging.
1
Page 4
Micro SD Card Slot
Power Port
Reset Button
NameDescription
Micro SD Card
(sold separately)
Reset Button
Power PortFor charging the camera.
Power Button• Power on:
Initialize the card in the EZVIZ app before using it.
Recommended compatibility: Class 10, maximum space 256GB.
Press and hold for 4seconds to restart and set all parameters to default.
Press and hold for 2 seconds in shut-down state.
• Power off:
Press and hold for 4 seconds to power off the camera.
Power Button
Speaker
Setup
Follow the steps to set your camera:
1. Get the EZVIZ app, and log in to your EZVIZ app account.
2. Power on your camera.
3. Add your camera to your EZVIZ account.
2
Page 5
1� Get the EZVIZ App
1. Connect your mobile phone to Wi-Fi (suggested).
2. Download and install the EZVIZ app by searching “EZVIZ” in the App Store or Google PlayTM.
3. Launch the app and register an EZVIZ user account.
EZVIZ App
If you have already used the app, please make sure that it is the latest version. To find out if an update is available, go to the app store and
search for EZVIZ.
2� Power on the camera
In the shutdown state, hold the power button for 2 seconds to power on.
If the camera is out of battery, connect it to power outlet with the power adapter (5V 2A) for charging (purchase separately).
It is recommended to fully charge the camera before you use it for the first time.
Power Outlet
Power Cable
NameDescription
LED IndicatorSolid Green: Camera fully charged.
Slow-flashing Green: Charging.
• It is recommended to use the power cable included in the package.
• Please purchase a 5V 2A power adapter, cause it is not included in the package.
• Please do not charge the camera when the temperature exceeds 45 degrees or below 0 degrees.
• It is not allowed to charge the camera with power adapter outdoors.
• When charging, the camera will be automatically turned on.
3
Page 6
3� Add Camera to EZVIZ
- Press and hold the reset button on the camera for 4 seconds. When the LED indicator ashes blue quickly, indicates that the
camera is ready for Wi-Fi conguration.
- Log in to your account using the EZVIZ app.
- On the Home screen, tap “+” on the upper-right corner to go to the Scan QR Code interface.
- Scan the QR code on the Quick Start Guide cover or on the body of the camera.
- Follow the EZVIZ app wizard to nish Wi-Fi conguration.
If you want to change your camera's Wi-Fi, press and hold the reset button for 4 seconds and repeat the steps above.
Camera Installation
1� Install Micro SD Card (Optional)
- Insert the Micro SD card (sold separately) into the card slot as shown in the gure below.
After installing the Micro SD card, you should initialize the card in the EZVIZ app before using it.
- In the EZVIZ app, tap the Storage Status in the Device Settings interface to check the SD card status.
- If the memory card status displays as Uninitialized, tap to initialize it.
The status will then change to Normal and it can store videos.
4
Page 7
2� Installation Steps
• The device is not waterproof. Please install indoor.
• It is recommended to install the camera around the crib for better care of the baby.
• Do not install the camera more than 6.6 ft (2 m) above the ground to avoid being injured.
1. Rotate the rotatable cylinder of the bracket counterclockwise and lift the upper clip of the bracket base as shown in the
gure below.
Rotatable
Cylinder
2. Insert the base into the place where you want to install the device and rotate the rotatable cylinder to x the bracket in case
of loosening or falling.
Upper Clip
2
1
During installation, it is recommended to adjust the detection sensitivity of the camera in EZVIZ APP.
5
Page 8
3. After installation, it is recommended to adjust the position of the lens (by adjusting the soft rod of the bracket) through the
live view in EZVIZ App to get the best monitoring perspective.
The soft rod (Adjustable part)
Note: Do not bend excessively in case
of camera falling.
- For example: Install the camera around the crib. The installation effect is shown in the gure below.
6
Page 9
3� Remove the shell (Optional)
• The device shell is made of food-grade silica gel. Please rest assured that it does not need high-temperature cooking
and disinfection or the magnetic effect might be affected.
• Don't remove the shell. If you must remove the shell, please follow the tips below.
Don's
Push the device body backward from the
front end of the shell.
4� Install the shell (Optional)
Don's
Insert the rear part of the device body from
the front end of the shell until it is installed
properly.
Do's
Push the device body forward from the
rear end of the shell.
Do's
Insert the front part of the device body
from the rear end of the shell until it is
installed properly.
7
Page 10
View Your Device
The App interface may change due to version update. Please refer to the actual interface.
1� Live View
When you launch the EZVIZ app, the device page displays as shown below.
You can view and listen to a live feed, take snapshots or recordings, and choose video definition as needed.
Swipe left and right across the screen to see more icons.
IconDescription
Share. Share your device.
Settings. View or change the device settings.
Snapshot. Take a snapshot.
Record. Manually start/stop recording.
Talk. Start using talk and listen.
Definition. Select video resolution from Ultra HD, Hi-Def or Standard.
Multi-screen Live. Tap to select live view window layout.
Please refer to the actual interface for specific information.
8
Page 11
2� Settings
In the settings page, you can set the parameters of the device.
ParameterDescription
NameCustomize the name of your device.
• Record Mode: The camera will keep recording. Please plug the camera in.
• Performance Mode: One video clip is longer but saves less power.
Working Mode
Intelligent Detection
NotificationYou can set the notification from the device-side and app-side.
AudioWhen disabled, both live view and recorded videos will not have audio.
Image
Light
BatteryYou can see the battery capacity.
• Power Saving Mode: One video clip is shorter but saves more power.
• Super Power-saving: Sleep Mode is on. Active live view can wake up the camera.
• Configure Working Mode: Customize the working mode in different periods.
You can customize the detection notification by changing the value of detection sensitivity.
Devices will alert based on the selected mode, including device-side audible notification and App-side message
notification.
• Original: Default image style.
• Soft: Lower color saturation.
• Vivid: Higher color saturation.
• OSD: When enabled, OSD with the device name will be displayed on all videos captured by the camera.
When disabled, the camera indicator will be off.
Exceptions: The camera indicator will still be on, when the camera is charging or the camera is exception.
Cloud StorageYou can subscribe and manage the cloud storage.
Record ListYou can see the device storage status, include cloud storage and memory card.
Security Settings
NetworkYou can see the Wi-Fi that the device has connected to, and you can tap to change to another Wi-Fi.
Device InformationYou can see the device information here.
Share the Device
Delete DeviceTap to delete the camera from your EZVIZ account.
• Video Encryption: When enabled, your videos will be encrypted.
• Change Encryption Password: You can change your encryption password.
Enter an email address or phone number to invite and grant device permissions to a family member or guest.
9
Page 12
EZVIZ Connect
1� Use Amazon Alexa
These instructions will enable you to control your EZVIZ devices with Amazon Alexa. If you run into any difficulties during the
process, please refer to Troubleshooting.
Before you start, make sure that:
1. EZVIZ devices are connected to the EZVIZ app.
2. In the EZVIZ app, turn off the "Video Encryption" and turn on the "Audio" in the Device Settings page.
3. You have an Alexa-enabled device (i.e Echo Spot, Echo-Show, All-new Echo-Show, Fire TV (all generations), Fire TV stick
(second generation only), or Fire TV Edition smart TVs).
4. The Amazon Alexa app is already installed on your smart device, and you have created an account.
To Control EZVIZ devices with Amazon Alexa:
1. Open the Alexa app and select "Skills and Games" from the menu.
2. On the Skills and Games screen, search for "EZVIZ", and you will nd "EZVIZ" skills.
3. Select your EZVIZ device's skill, then tap ENABLE TO USE.
4. Enter your EZVIZ username and password, and tap Sign in.
5. Tap the Authorize button to authorize Alexa to access your EZVIZ account, so that Alexa can control your EZVIZ devices.
6. You will see "EZVIZ has been successfully linked", then tap DISCOVER DEVICES to allow Alexa to discover all your EZVIZ
devices.
7. Go back to Alexa app menu and select "Devices", and under devices you will see all your EZVIZ devices.
Voice Command
Discover a new smart device via the "Smart Home" menu in the Alexa app or the Alexa Voice Control function.
Once the device is found, you can control it with your voice. Speak simple commands to Alexa.
Your device's name for example: "show xxxx camera," can be modified in the EZVIZ app. Every time you change the name
of the device, you will need to discover the device again to update the name.
Troubleshooting
What do I do if Alexa fails to discover my device?
Check if there are any Internet connecting problems.
Try to reboot the smart device and re-discover the device on Alexa.
Why does the device's status show "Ofine" on Alexa?
Your wireless connection might have been disconnected. Reboot the smart device and re-discover on Alexa.
Internet access on your router could be unavailable. Check if your router is connected to the Internet and try again.
For details about countries that support the using of Amazon Alexa, see its official website.
10
Page 13
2� Use Google Assistant
With the Google Assistant, you can activate your EZVIZ device and watch live by speaking Google Assistant voice commands.
The following devices and apps are required:
1. A functional EZVIZ app.
2. In the EZVIZ app, turn off the "Video Encryption" and turn on the "Audio" in the Device Settings page.
3. A TV with functional Chromecast connecting to it.
4. The Google Assistant app on your phone.
To get started, follow the steps below:
1. Set up the EZVIZ device and make sure it works properly on the app.
2. Download the Google Home app from the App Store or Google Play StoreTM and log into your Google account.
3. On the Myhome screen, tap “+” on the upper-left corner, and select "Set up device" from the menu list to go to the Set up
interface.
4. Tap Works with Google, and search for "EZVIZ", where you will nd "EZVIZ" skills.
5. Enter your EZVIZ username and password, and tap Sign in.
6. Tap the Authorize button to authorize Google to access your EZVIZ account, so that Google can control your EZVIZ devices.
7. Tap Return to app.
8. Follow the above steps to complete the authorization. When synchronization is completed, EZVIZ service will be listed under
your list of services. To see a list of compatible devices under your EZVIZ account, tap on the EZVIZ service icon.
9. Now try some commands. Use the name of the camera that you created when you set up the system.
Users can manage devices as a single entity or in a group. Adding devices to a room allows users to control a group of devices
at the same time using one command.
Q:A:If the camera is oine on the App, will the video recording be continued?
If the camera is powered on but disconnect to the Internet, then local recording will continue but cloud recording will stop. If
the camera is powered off, both video recordings will stop.
Q:A:Why the alarm is triggered when nobody in the image?
Try to set the alarm sensitivity lower. Please notice that vehicle and animals are also the trigger source.
Q:A:Why the alarm is not triggered when there is human appear in the PIR detection area?
- Try to set the alarm sensitivity higher.
- Make sure that there is someone in detection area, and the PIR detection distance is 7 meters when the detection
sensitivity is set to 100.
- Limited by PIR detection technology, the camera may fail to detect motion when environment temperature is close to
human body temperature or someone approaches the PIR sensor vertically.
Q: What if the LED indicator remains off?
A:- Please check whether the camera has run out of battery (press and hold the power button for 2 seconds, the LED indicator
will fast ash red for 2 times). If so, charge the camera as soon as possible.
- If the LED indicator still can not be turned on after the camera is charged, it is recommended to check whether the LED
indicator is turned off on the setting page on EZVIZ APP. If so, turn it on.
For additional information about the device, please refer to www.ezviz.eu.
11
Page 14
Initiatives on the Use of Video Products
Thank you for choosing EZVIZ products.
Technology affects every aspect of our life. As a high-tech company, we are increasingly aware of
the role technology plays in improving business efficiency and quality of life, but at the same time,
the potential harm of its improper usage. For example, video products are capable of recording
real, complete and clear images. This provides a high value in retrospect and preserving real-time
facts. However, it may also result in the infringement of a third party’s legitimate rights and interests
if improper distribution, use and/or processing of video data takes place. With the philosophy
of “Technology for the Good”, EZVIZ requests that every end user of video technology and video
products shall comply with all the applicable laws and regulations, as well as ethical customs, aiming
to jointly create a better community.
Please read the following initiatives carefully:
1. Everyone has a reasonable expectation of privacy, and the installation of video products should
not be in conflict with this reasonable expectation. Therefore, a warning notice shall be given in a
reasonable and effective manner and clarify the monitoring range, when installing video products
in public areas. For non-public areas, a third party’s rights and interests shall be evaluated when
installing video products, including but not limited to, installing video products only after obtaining
the consent of the stakeholders, and not installing highly-invisible video products.
2. The purpose of video products is to record real activities within a specific time and space and
under specific conditions. Therefore, every user shall first reasonably define his/her own rights in
such specific scope, in order to avoid infringing on a third party’s portraits, privacy or other legitimate
rights.
3. During the use of video products, video image data derived from real scenes will continue to be
generated, including a large amount of biological data (such as facial images), and the data could
be further applied or reprocessed. Video products themselves could not distinguish good from bad
regarding how to use the data based solely on the images captured by the video products. The result
of data usage depends on the method and purpose of use of the data controllers. Therefore, data
controllers shall not only comply with all the applicable laws and regulations and other normative
requirements, but also respect international norms, social morality, good morals, common practices
and other non-mandatory requirements, and respect individual privacy, portrait and other rights and
interests.
4. The rights, values and other demands of various stakeholders should always be considered
when processing video data that is continuously generated by video products. In this regard, product
security and data security are extremely crucial. Therefore, every end user and data controller,
shall undertake all reasonable and necessary measures to ensure data security and avoid data
leakage, improper disclosure and improper use, including but not limited to, setting up access
control, selecting a suitable network environment (the Internet or Intranet) where video products are
connected, establishing and constantly optimizing network security.
5. Video products have made great contributions to the improvement of social security around the
world, and we believe that these products will also play an active role in more aspects of social life.
Any abuse of video products in violation of human rights or leading to criminal activities are contrary
to the original intent of technological innovation and product development. Therefore, each user shall
establish an evaluation and tracking mechanism of their product application to ensure that every
product is used in a proper and reasonable manner and with good faith.
12
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.