EZURIO TRBLU23 – 00200 User Manual

Product Brief: BISM II TRBLU23-00200-03

Bluetooth® Serial Module

BISM II

Part No: TRBLU23 – 00200

The Bluetooth Intelligent Serial Module is specifically designed for applications where robust short range connectivity is required. This particular module provides a reliable Bluetooth connection that exceeds all requirements in terms of performance. Having an excellent range of up to 300 metres with very low power consumption of less than 36 mA makes this module a true class leader.

Key Features

• Best in class range, providing open field connectivity in excess of 300 metres

• Integrated high performance ceramic antenna

• Adaptive Frequency hopping to cope with interference from other wireless products

• Optimised receive sensitivity to provide long range initial connections that largely eliminate

connection Hysterisis

• A full industrial operating temperature range of -40°C to +85°C

• Data transfer rate up to 300 kbps

• Fully approved product – no further approval costs

• Class 1 version 2.0 Bluetooth

• Receive sensitivity better than -84 dBm

• Support for 128 bit encryption

• Non-discoverable modes

• 40 way Hirose connector

• 2 X 8 bit ADC’s

• 9 X GPIO

• Low power modes

• Lead free

• 2 year warranty

As well as incorporating a fully approved embedded Bluetooth protocol stack, the module includes a comprehensive AT style interface, which dramatically reduces the development time of applications from months to days.

Key Benefits

• Fastest time to market

• Range and reliability

• Low power

• Low cost of ownership

This module provides the very best package for embedding into your applications and is contained within a compact profile.

Dimensions

• 25 X 35 X 10 mm

• 8 grams in weight

For further information please visit our website at www.ezurio.com

Bluetooth is a trademark owned by Bluetooth SIG, Inc., USA and licensed to EZURIO Ltd.

Alternatively contact: sales@ezurio.com - +44 (0) 20 8938 1072

Product Brief: BISM II TRBLU23-00200-03

Bluetooth Serial Module – BISM II

Features

Version 2.0 Bluetooth Adaptive Frequency Hopping Supports Wi-Fi co-existence Fully approved end product – No approval cost Embedded Bluetooth stack Integrated antenna with up to 300m range Simple AT style command set interface Configurable General Purpose Input Outputs

8bit Analogue to Digital Converter Industrial Temperature range Wide ranging profile support: SPP, DUN, headset, audio gateway, handsfree and FTP client

Key benefits

Fastest time to market Ideal for embedded systems Supports encrypted data Low power Lowest cost of ownership No host stack required Robust design Extensive technical support

Overview of the technical specification

Feature Implementation Feature Implementation

Bluetooth

Frequency 2.400 – 2.485 GHz Bluetooth Qualified Bluetooth 2.0 Max Transmit Power + 6dBm Lead Free RoHS compliant Min Transmit Power - 27dBm Temperature Range -40°C to +85° Low Power Sniff 2.5mA typical Interface Levels 3.3V Receive Sensitivity Better than -84dB Audio Supported Range 300m (free space) Multipoint Supported Serial Interface 3.3v UART Field Upgrades Over UART

GPIO 9 X Digital ADC 2 X 8bit Serial Parameters Default 9600,n,8,1

Current Consumption Idle mode = 13mA

Class 1 Physical Size 25 X 35 X 10mm, 8g

Protocols UART From 1200 to 921600bps DTR, DSR, RTS, CTS, DCD, RI DCE or DTE mode

Data Transfer Rate Up to 300 kbps Connected as master = 20mA Connected as slave= 30mA

Environmental tests

IEC 60068-2-1:1990 IEC 60068-2-2:1974 IEC 60068-2-14:1984 IEC 60068-2-56:1988 IEC 60068-2-30:1980 IEC 60068-2-29:1987 SAE 1455:REVAug94 Paragraph 4.9.4.2 (random)

The details contained within the document are subject to change; please download the product specification available from

SAE 1455:REVAug94 Paragraph 4.10.4 (shock)

AT command set Multipoint

www.ezurio.com for the most up to date specification

For further information please visit our website at www.ezurio.com

Bluetooth is a trademark owned by Bluetooth SIG, Inc., USA and licensed to EZURIO Ltd.

Alternatively contact: sales@ezurio.com - +44 (0) 20 8938 1072

www.ezurio.com

BISM2 Bluetooth™ Version 2.0 Serial Module

1. General Description

Ezurio’s BISM2 Bluetooth Serial Module is a fully integrated and qualified Class 1 Bluetooth solution designed for lowest cost of integration and ownership for designers wishing to incorporate Bluetooth functionality into their products. The module is qualified to Bluetooth Version 2.0.

The BISM2 Bluetooth Serial Module is one of the most compact complete Bluetooth solutions, making it ideal to integrate into handheld devices. However a version of the BISM2 module is available that retains the same board size, mounting holes and connector as the previous Bluetooth Module from Ezurio, allowing users to access the improved radio performance and functionality without the need for any pcb modifications.

The BISM2 Module is based on Cambridge Silicon Radio’s BlueCore 04 chipset. The module contain sall of the hardware and firmware for a complete Bluetooth solution, requiring no further components. The Module has an integrated, high performance antenna which is matched with the Bluetooth RF and baseband circuitry. The firmware integrated into the BC04 chipset implements the higher layer Bluetooth protocol stack, up to and including the Generic Access Profile (GAP), Service Discovery Profile (SDAP), Serial Port Profile (SPP), Dial Up Networking Profile (DUN), Headset Profile (HSP), Hands Free Profile (HFP), File Transfer Profile (FTP) and Audio Gateway. A virtual processor is used within the BC04 to implement an AT command processor. This interfaces to the host system over a straight forward serial port using an extensive range of AT commands. The AT command set abstracts the Bluetooth protocol from the host application, saving many months of programming and integration time. It provides extremely short integration times for data oriented cable replacement and voice applications. A low cost development system is available for fast product evaluation and development.

An alternative version of firmware is available that provides programming support for multi-point applications.

The Module can be configured so that it can be attached to a ‘dumb’ terminal or attached to a PC or PDA for cable replacement applications.

In addition to the Bluetooth functionality, The BISM2 Module provides access to 9 General I/O lines and 2 analogue input and output lines. These can be configured to provide connection to simple devices such as switches or LEDs without requiring any external processing. Both the GPIO and ADC lines can be accessed either via the wired host UART connection, or remotely over the Bluetooth link.

The BISM2 module is supplied in a small form factor pcb (22.0mm x 34.0mm x 7.6mm), that connects to a main pcb using a 40 way Hirose connector. The interface is compatible with the BISM1 module. The module includes a high sensitivity, high gain antenna which provides excellent range. Typical open field performance provides ranges of over 250 metres at transmit powers of 4mW.

Support is provided for low power modes that make the BISM2 particularly applicable to battery powered installations.

The BISM2 module is Lead-free and is RoHS compliant and supports an industrial temperature range of -40°C to +85°C.

1.1 Applications

• POS Equipment

• Medical Equipment

• Telematics

Bluetooth is a trademark owned by Bluetooth SIG, Inc., USA, and is licensed to Ezurio Ltd

• Voice Applications

• Industrial Automation

• Automotive Applications

Module shown without RF shield

www.ezurio.com

2. Features

Feature Implementation

Bluetooth Transmission Class 1

Fully Bluetooth pre-qualified Bluetooth 2.0

Range 250 metres typical (free space)

Frequency 2.400 – 2.485 GHz

Max Transmit Power +6dBm

Min Transmit Power -27dBm

Receive Sensitivity Better than -86dB

Data Transfer rate Up to 300Kbps

Serial Interface RS-232 bi-directional for commands and data using AT commands

Serial parameters

Physical size

Current consumption

Low power sniff mode 2.5mA typ

Temperature Range Normal operation: -40°C to +85°C

Supply Voltage 3.6V – 7.0V

Brown-out Integrated brown out detection

Interface Levels 3.3V Logic

Audio

Profiles FTP Server, SPP, DUN, FTP, Audio Gateway, Headset, Handsfree

Multipoint Max 7 slaves

Field upgradeable Over UART

Protocols

GPIO

Indicators 1 x programmable LED (small form factor board only)

Lead free Lead-free and RoHS compliant

Default 9600,n,8,1 - Configurable from 1,200bps to 961,200 bps.

Support for DTR, DSR, DCD, RI, RTS, CTS

22.8 x 33.8 x 7.6 mm, 8g

24.0 x 69.0 x 7.6mm, 9g (BISM1 Form Factor)

Typically 22mA during data transfer in standard power mode. Lower powers are attainable with a configurable low power mode.

Audio can be transferred over SCO channels through the PCM interface at 64kbps. PCM can be configured as master or slave.

Single point firmware is controlled and configured using AT Commands. Standard multipoint firmware uses a simple packet based protocol and requires a host to enable the module to function effectively.

Single point only allows a point to point connection whereas multipoint allows more than one simultaneous connection.

9 x digital

2 x analogue (8 bit resolution)

3. Functional Block Diagram

www.ezurio.com

3.1 Connection Diagram

The Module is equipped with a 40-pin 0.5mm pitch board-to-board connector that connects to the application platform.

www.ezurio.com

3.2 Pin Descriptions

The Hirose DF12C board-to-board connector on the module is a 40-pin double-row receptacle.

The table below defines the pin functions. Note that this pin-out is as viewed from the underside of the Module.

Signal Description Pin

No.

1 Analogue 0 1.8v Max 2 GPIO1 I/O for Host.

3 Analogue 1 1.8v Max 4 GPIO2 I/O for Host

5 SPI_MISO SPI bus serial O/P 6 UART_RI ‘Ring’ Input or Output

7 SPI_CSB SPI bus chip select I/P 8 UART_DCD Input or Output

9 SPI_CLK SPI bus clock I/P 10 UART_DSR Input

11 GND 12 GPIO3/UART_DTR I/O for Host

13 RESET Reset I/P * 14 GPIO4 I/O for Host & LED

15 GND 16 GPIO5 I/O for Host

Signal Description

No.

17 SPI_MOSI SPI bus serial I/P 18 GND

19 UART_CTS Clear to Send I/P 20 PCM_CLK PCM Clock I/P

21 UART_TX Transmit Data O/P 22 PCM_IN PCM Data I/P

23 UART_RTS Request to Send O/P 24 PCM_SYNC PCM Sync I/P

25 UART_RX Receive Data I/P 26 PCM_OUT PCM Data O/P

27 VCC_3V3 3.3V Monitor 28 N/C

29 VCC_5V 3.6V < VIN < 7.0V 30 GND

31 N/C 32 USB / RESERVED Do not connect

33 GPIO6 ** I/O for Host 34 USB / RESERVED Do not connect

35 GPIO7 ** I/O for Host 36 GND

37 GPIO8 ** I/O for Host 38 GND

39 GPIO9 I/O for Host 40 N/C

Notes:

* The reset circuitry within the BISM Serial Modules now incorporates a brown-out detector within the module. Customers migrating from previous modules should check their implementation, as they may be able to simplify their external power supply design. The reset line has a fixed 10kOhm pull down resistor to ground.

** Pins 33, 35 and 37 were N/C on BISM1. Pin 39 was a 1V8 monitor. Designers migrating between designs should be aware that these are now available as I/O. Default configuration is as an input

PIO lines can be configured through software to be either inputs or outputs with weak or strong pullups or pull-downs. At reset, all PIO lines are configured as inputs with weak pull-downs.

UART_RX, UART_TX, UART_CTS, UART_RTS, UART_RI, UART_DCD and UART_DSR are all 3.3v level logic. For example, when RX and TX are idle they will be sitting at 3.3V. Conversely for handshaking pins CTS, RTS, RI, DCD, DSR a 0v is treated as an assertion.

Pin 6 (UART_RI) is active low. It is normally 3.3v. When a remote device initiates a connection, this pin goes low. This means that when this pin is converted to RS232 voltage levels it will have the correct voltage level for assertion.

www.ezurio.com

Pin 8 (UART_DCD) is active low. It is normally 3.3v. When a connection is live this pin is low. This means that when this pin is converted to RS232 voltage levels it will have the correct voltage level for assertion.

Pin 10 (UART_DSR) is an input, with active low logic. It should be connected to the DTR output of the host. When the BISM2 Module is in high speed mode (See definition for S Register 507), this pin should be asserted by the host to ensure that the connection is maintained. A deassertion is taken to mean that the connection should be dropped, or an online command mode is being requested.

Pin 27 (VCC_3V3 monitor) may only be used for monitoring purposes. It must not be used as a current source.

The GPIO pins can be accessed using S Registers 621 to 628. GPIO4 is connected to an LED on the module. If these I/O pins are set for input, then the LED will be driven by the host and appropriate drive current requirements must be satisfied. A Logic 1 switches on the LED.

GPIO3 is also used for DTR output (active low). See S Register 552 & 553.

Analogue 0 and 1 should not exceed 1.8v and S Registers 7xx are used to access them.

3.3 Electrical Specifications

3.3.1 Absolute Maximum ratings

Absolute maximum ratings for supply voltage and voltages on digital and analogue pins of the Module are listed below; exceeding these values will cause permanent damage.

Parameter Min Max Unit

Peak current of power supply 0 100 mA

Voltage at digital pins -0.3 3.7 V

Voltage at POWER pin 3.6 7 V

3.3.2 Recommended Operating Parameters

3.3.2.1 Power Supply

Signal Name Pin No I/O Voltage level Comments

Vcc 29 I 3.6V to 7.0V I

GND 11, 15, 18,

30, 36, 38

VCC_3V3 27 O 3.3V typical For monitoring only. No current

6 Ground terminals to be attached

3.3.2.2 RS-232 Interface

Signal Name Pin No I/O Signal level Comments

UART_TX 21 O

UART_RX 25 I

UART_CTS 19 I

VOLmax=0.2V

VOHmin=2.8V

VILmax=0.8V

VIHmin=2.1V

VIHmax=3.7V

VILmax=0.8V

VIHmin=2.1V

VIHmax=3.7V

= 30mA

typ

in parallel

source

www.ezurio.com

UART_RTS 23 O VOLmax=0.2V

VOHmin=2.8V

UART_DSR 10 I VILmax=0.8V

VIHmin=2.1V

VIHmax=3.7V

UART_DTR 12 O

UART_RI 6 I or O

UART_DCD 8 I or O

VOLmax=0.2V

VOHmin=2.8V

O/P : VOLmax=0.2V

VOHmin=2.8V

I/P : VILmax=0.8V

VIHmin=2.1V

VIHmax=3.7V

O/P : VOLmax=0.2V

VOHmin=2.8V

I/P : VILmax=0.8V

VIHmin=2.1V

VIHmax=3.7V

Shared with GPIO3

Direction may be programmed.

3.3.2.3 SPI Bus

Signal Name Pin No I/O Signal level Comments

SPI_MOSI 17 I

SPI_MISO 5 O

SPI_CSB 7 I

SPI_CLK 9 I

VILmax=0.8V

VIHmin=2.1V

VIHmax=3.7V

VOLmax=0.2V

VOHmin=2.8V

VILmax=0.8V

VIHmin=2.1V

VIHmax=3.7V

VILmax=0.8V

VIHmin=2.1V

VIHmax=3.7V

Used to reprogram Flash

3.3.2.4 PCM Interface

Signal Name Pin No I/O Signal level Comments

PCM_CLK 20 I or O

PCM_IN 22 I

PCM_SYNC 24 I or O

PCM_OUT 26 O

O/P : VOLmax=0.2V

VOHmin=2.8V

I/P : VILmax=0.8V

VIHmin=2.1V

VIHmax=3.7V

VILmax=0.8V

VIHmin=2.1V

VIHmax=3.7V

O/P : VOLmax=0.2V

VOHmin=2.8V

I/P : VILmax=0.8V

VIHmin=2.1V

VIHmax=3.7V

VOLmax=0.2V

VOHmin=2.8V

If unused keep pins open

www.ezurio.com

3.3.2.5 General Purpose I/O and ADC

Signal Name Pin No I/O Signal level Comments

GPIO 1 - 9 2,4,12,

14,16,

33, 35,

37, 39

AIO_0, AIO_1 1, 3 I

I or O

O/P : VOLmax=0.2V

VOHmin=2.8V

I/P : VILmax=0.8V

VIHmin=2.1V

VIHmax=3.7V

Range 0 – 1.8V

3.3.2.6 Miscellaneous

Function Signal Name Pin No I/O Signal level Comments

Reserved USB D- 32 I

Reserved USB D+ 34 I

Reset RESET 13 I

VILmax =0.3vdd_usb

VIHmin =0.7vdd_usb

VILmax =0.3vdd_usb

VIHmin =0.7vdd_usb

Threshold 2.6V

Normally inactive. Pull to GND through 10K

Active HIGH

Terminology:

USB Signal Levels. vdd_usb refers to the internal voltage generated by the LDO regulator on the module, which is typically 3.3V. Hence 0.3vdd_usb and 0.7vdd_usb correspond to 1.0V to 2.3V. If Vcc falls below the recommended minimum of 3.6V, these values will be reduced.

www.ezurio.com

4. I/O Characteristics

4.1 Power Consumption

The current drain from the Vcc power input line is dependent on various factors. The three most significant factors are the voltage level at Vcc, UART Baudrate and the operating mode.

The hardware specification for the Module allows for a voltage range of 3.6 to 7.0 at Vcc. Tests have shown that there is no significant difference in current draw when Vcc is 5 or 6V. Therefore the data presented below, pertains to Vcc levels of 3.6 and 5v only. Tests have shown that where power drain is an issue, it is best to keep Vcc at the lower end of the range.

The UART baudrate has a bearing on power drain because as is normal for digital electronics, the power requirements increase linearly with increasing clocking frequencies. Hence higher baudrates result in a higher current drain.

Finally with regards to operating mode the significant modes are; idle, waiting for a connection, inquiring, initiating a connection, sniff and connected. With connected mode, it is also relevant to differentiate between no data being transferred and when data is being transferred at the maximum rate possible. The AT command Set document describes how to configure the Module for optimal power performance.

4.1.1 Typical Current Consumption in mA

Baudrate

9,600 38,400 115,200 460,800

3.6v 1.60 1.80 1.96 3.00 Idle Mode, S512=1

5.0v 2.00 2.10 2.30 3.40

3.6v 59.00 59.00 59.00 59.00 Wait for Connection Or Discoverable Mode,

AT+BTP

S508=S510=640, S509=S511=320

AT+BTP

S508=S510=1000, S509=S511=11*

5.0v 65.00 65.00 65.00 65.00

3.6v 2.75 2.94 3.10 4.12 Wait for Connection Or Discoverable Mode,

5.0v 3.26 3.36 3.55 4.63

3.6v 50.00 50.00 50.00 50.00 Inquiring Mode, AT+BTI

5.0v 54.00 54.00 54.00 54.00

3.6v 50.00 50.00 50.00 50.00 Connecting Mode (ATDxxx)

5.0v 54.00 54.00 54.00 54.00

3.6v 6.00 6.10 6.40 7.20 Connected Mode (No Data Transfer)

5.0v 7.20 7.20 7.40 8.20

3.6v 21.50 22.50 24.50 32.50 Connected Mode (Max Data Transfer)

5.0v 24.50 26.00 28.00 36.00

Notes: These figures were obtained with pre-production firmware. Production values will typically be 20% lower.

* Calculated figures

5. DC Characteristics

5.1 RF Performance

5.1.1 Transmit Power

Conducted Transmit Power min: 1.0mW (0dBm) max: 4mW (6dBm)

Antenna Gain +2dBi typ.

Effective Transmit Power min:0dBm Max: +6dBm

Output power can be reduced by program control

5.1.2 Receive Sensitivity

Receive Sensitivity -86dBm (at 25°C)

Antenna Gain +2dBi typ

Effective Receive Sensitivity -88dBm (at 25°C)

www.ezurio.com

5.1.3 RF Performance Data

Receive Sensitivity

0

-40 deg -20 deg 0 deg 20 deg 40 deg 60 deg 80 deg 100 deg

-10

-20

-30

-40

-50

-60

Attenuation Setting dBm

-70

-80

-90

-100

Temperature Deg. C.

NOTE: Measured as attenuation required to achieve better than 0.1% BER

5.2 Range

See the Data Transfer Rate vs. distance graph below. The data throughput of the Module is limited to 280Kbps by the parsing of the data being transferred through the RFCOMM stack. The graph below shows the typical data throughput. Distances are measured in free space between 2 Modules.

EZURIO TRBLU23 – 00200 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual