Ezmax EZMP3000 User Manual

follow the legal measures.

The contents of the User’s Guide are subject to change without prior

notice for further improvement of the product.

EZMAX

http://www.ezmax.co.kr

Table of Contents

Before Use

1. Product & Accessories.......2

2. PC System Requirement ...3

3. Safety Precaution ...........4

4. Features of Product.…….…..5

Designation of Product

1. Front/Rear View…….…..…….7

2. Side View………………..…….….8

3. Functional Icon of Display .9

Preparation

1. Connecting Player to PC….10

2. Installing USB Driver ....... 11

3. Running Basic Functions. .20

4. Installing Logo Editor & Applying Logo to Player ……23

Basic Functions

1. Basic Operation..............27

2. Power ON/OFF................ 30

3. Play Music ....................31

4. Record Voice & Play ……..33

5. FM Listening, Record & Play

................................34

6. Record from External

Source & Play ..............36

Function Menus

1. PLAYBACK .................. 40

2. EQUALIZER ................ 41

3. 3D EFFECT ................. 42

4. DELETE ......................44

5. SETTING .................... 46

Upgrade ................. 51

Others

1. Built-in Battery Recharge

................................53

2. How to set HOLD..........54

3. Trouble Shooting…........55

4. Product Specification..... 57

FCC Compliance Statements

................................... 58

1. Product & Accessories

!NOTE: Accessories are subject to change w itho ut prior notice for fur ther

improvement of the product performance and quality.

The followings are the basic requirements of the PC to use the MP3 Player. Please carefully read and confirm the requirements.

 Pentium 200MHZ or above  Windows 98SE / ME / 2000 / XP

(Windows 98 – Install Driver)

 Mac OS 9.0 / 10.0  USB (Universal Serial Bus) Port  CD-ROM Drive  Hard Disc Space 20MB or above

(Additional capacity is required to save the music file.)

2. PC System Requirements

 64MB RAM or above

!NOTE: Actually available built-in memory in this player is less than the nominal capacity of the product because the FirmWare uses a part of the capacity to drive the system.

3. Safety Precaution

Listening to Music…

The output class of the product guarantees the best po ssible sound of the mid-size volume. As the high volu me for a long time may damage the hearing, listen to music in moderate volume.

Do not exposure to the strong shock or vibration. Please take good care of handling the product and accessories. Dropping on the floor or giving a shock may result in a serious damage of the product.

Storing the Product…

Avoid storing in the extreme change of temperature, high humidity and the strong magnetic field.

Cleaning the Product… The chemical may discolor or damage the surface of the player. Use the soft cloth to gently clean the player.

!NOTE: Do not disassemble, repair or reconstruct the product.

4. Features of the Product (1)

Multi-Codec Player

Compatible with MP3, WMA and ASF (Audio) formats Superior Sound Quality SRS (Sound Retrieval System) WOW

The introduction of the SRS allows the 3D surround effect, and the user to define its own unique sound effect. Enjoy a new variety of the 3D surround effects.

Organic EL Display A Graphic display with blue EL4 line enhances the high-class image.

FirmWare Upgrading Upgrade FirmWare to add/change/improve functions and performance of the Player. Always enjoy the music in the latest version of performance.

Voice Recording The superior sound quality voice recording function allows the clear recording in the conferences and lectures.

FM Radio Conveniently enjoy the FM radio with a variety of functions such as the manual/automatic frequency search, automatic tune to the radio station, and the station preset.

4. Features of the Product (2)

Easy Navigation

A tree configuration allows the easy search and control. 6 Preset Equalizer

You can produce your own sound quality with the 5-band User EQ and 5 recommend EQs including Normal, Classic, Pop, Rock and Jazz.

Caption the Text of the Song

The text of the song is shown in two lines on the display during the playback.

Compatible with the Removable Disk Unit It is recognized as a removable disk unit if connecting to the PC to upload or download files without Manager program.

Direct Encoding Use the LINE IN on the player to convert the external sound into the audio file. Also use the FM radio to convert the radio broadcasting into the audio file while listening to the FM radio.

Show My Own Sense of Logo on My Player

User can display the self-created logo on the Player..

Rechargeable battery through USB

A rechargeable battery through USB enables a user to conveniently recharge after a long enjoyment of this product.

1. Front/Rear View of the Product

Side View of the Product

3. Functional Icon of Display

1. Connecting Player to PC

To download music files (MP3/WMA/ASF) from the PC, use US B cable to connect MP3 Player to the USB port of the PC.

(Make sure to only use the USB cable supplied with the MP3 Player.)

Connect ‘A’ (large) to the USB port of the PC. Connect ‘B’ (small) to the USB port found when opening USB port plug on the Player.

2. Installing USB Driver (1)

Connecting USB cable to the Player displays the following screen in the display(WAIT) on the Player.

󰼿󰼿

󰼿󰼿󰼿󰼿󰼿󰼿󰼿󰼿 󰼿

Before install drive After install drive

1. Follow the instruction below for the PC of which OS is one of the Windows ME, Windows 2000 and Windows XP.

A screen appears with a message saying, “New hardware is found” on the PC as shown below. Follow the instruction to install the driver. The installation may automatically be completed without showing the installation screen depending on the PC environment.

An example here is for the WINDOWS 2000.

1) A message saying,

“Found New Hardware” automatically appears.

2) The “Found New Hardware Wizard” is automatically started on the PC.

Click ‘Next’.

3) “Hardware Device Driver

Installation” will be continued. Check in “Search for Driver suitable to Device (recommended)” to click “Next”.

2. Installing USB Driver (2)

4) Select “Assigned Location”

for the optional Search Location, and then click ‘Next’.

5) If “Maker’s File Location to

Copy” is C:\Winnt\Inf or C:\Windows\Inf, click ‘OK’. If the file is not in the C:\Winnt\Inf or C:\Windows\Inf, use ‘Browse…’ to select.

2. Installing USB Driver (3)

6) You will see “Drive File

Search Result”. If then, click “Next”.

7) Click ‘Yes’ to continue the

installation of the USB Mass Storage Device.

2. Installing USB Driver (4)

8) Click ‘Finish’ after

completing the installation of the USB Mass Storage Device.

9) Click ‘Yes’ to continue the

installation of the disk drive.

2. Installing USB Driver (5)

Click [Start] – [Setting] – [Control Panel] to open “System” icon, and then click “Hardware” – “Device Manager” tab to check if USB driver is properly installed.

!Note: The example of installing a driver above applies to a comp uter which adopts a removable disc for the first time. The specific in stalling process varies among users’ PC environments. In the event of the two devices in Device Administrator or the message “READY” being shown as above, the driver has bee successfully installed. It takes some 30 ~ 60 seconds to install the driver among various PC’s.

2. Installing USB Driver (6)

2. Windows 98 can’t support a removable storage device. You should

install our Win98 Driver to use under Windows 98.

1) Don’t connect the USB cable to the player until the following is

completed.

2) Insert the installation CD into the CD-ROM drive, and then execute

'install.bat' or

in the folder Win98_Driver to copy the driver

file to each folder.

3) Connect the USB cable to the player, and the Add New Hardware

Wizard will appear to install the driver.

4) The installation of the driver

will be completed as the following dialogue window appears

2. Installing USB Driver (7) – windows 98

+ 42 hidden pages

Ezmax EZMP3000 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual