EZ-ACCESS RP-310 User Manual
PASSPORT® Vertical Platform Lift
12866 01-20-14
© 2013-2014 EZ-ACCESS, a division of Homecare Products, Inc. All rights reserved
reproduced or reused wit ho ut the e xp re ss writt en perm i ssi o n of Homecare Products, Inc.
MODEL #:
TOWER WEIGHT:
PLATFORM WEIGHT:
168 lbs (76 kg)
160 lbs (73 kg)
168 lbs (76 kg)
160 lbs (73 kg)
NET WEIGHT:
384 lbs (175 kg)
376 lbs (171 kg)
415 lbs (189 kg)
407 lbs (185 kg)
TOWER HEIGHT WITH LEGS:
76-1/8” (1931 mm)
76-1/8” (1931 mm)
96-1/8” (2439 mm)
96-1/8” (2439 mm)
TOWER WIDTH WITH LEGS:
33-3/8” (84 cm)
33-3/8” (84 cm)
33-3/8” (84 cm)
33-3/8” (84 cm)
HEIGHT AT MAXIMUM TRAVEL:
97-9/16” (2464 mm)
97-9/16” (2464 mm)
117.75” (2997 mm)
117.75” (2997 mm)
PLATFORM “USEABLE” SIZE:
FOOTPRINT (RAMP DEPLOYED):
76" X 52"
(1930 mm x 1320 mm)
85" X 52"
(2159 mm x 1320 mm)
76" X 52"
(1930 mm x 1320 mm)
85" X 52"
(2159 mm x 1320 mm)
LIFTING HEIGHT:
52” (1231 mm)
52” (1231 mm)
72” (1828.8 mm)
72” (1828.8 mm)
PERFORMANCE STANDARDS:
B44.1 / ASME A17.5, ASME 18.1-2008 (Sec 5)
MAXIMUM RATED L OAD:
NUMBER OF PASSENGERS:
Two (one occupant with mobility device, plus one caregiver). Not to exceed Maximum Rated Load
MAIN DRIVE ELECTRICAL:
24 VDC supplied by two 12 VDC-12 Ah sealed lead-acid batteries, 2 amp smart charger
CONTROL CIRCUIT ELECTRICAL:
12 VDC
AC INPUT:
120 VAC, .6 amps
AC POW E R CORD LENGTH:
12-ft. (3.7 m)
PRIMARY DRIVE:
24 VDC worm drive; .58 hp; 28:1 reduction ratio; 96 rpm output speed rating
FINAL DRIVE:
1” diameter Hi-lead ® drive screw with bronze nut and bronze safety back-up nut
DRIVE MOTOR CONTROL:
24 VDC reversing relay, 12 VDC control input, 30-amp auto reset circuit breaker
BRAKING:
STANDARD INTERFACE CONTROLS:
12 VDC; separate, continuous, low pressure large mushroom-head control switches for “UP/DOWN”
control box; keyed operation
EMERGENCY STOP:
Red, sealed, 1.5” diameter mushroom-head, push button
PLATFORM TRAVEL SPEED:
10 ft/min
NUMBER OF STOPS/LANDINGS:
Two stops (upper and lower landings)
TOWER CONSTRUCTION:
CARRIAGE CONSTRUCTION:
Welded alum inum, 1.9” (48.3 mm) MDS nylon 6/6 rollers, and UHMW polyethylene low frict i on buff ers
PLATFORM CONSTRUCTION:
Welded aluminum, totally enclosed, removable aluminum framed side enclosures with coat ed steel fil l er
UNDER PLATFORM SAFETY:
GUARD RAMP:
EMERGENCY LOWERING:
Manual hand-crank lowering capability
LIMIT SW ITCHES:
Upper and lower primary and secondary limit switch triggering locations are adjustable via movable cams
WEIGHT OF TOP LANDING GATE:
50 lbs. (23 kg)
FLOOR ATTACHMENT:
Anchor-ready powder coated structural steel legs (concrete anchors not included)
MOUNTING SURFACE RECOMMENDED:
A level, ≥ 3,500 psi concrete pad with a 4” minimum thickness
DRIVE SCREW LUBRICATION:
Chevron Ulti-plex® Synthetic Grease EP, NLGI Grade 1.5 (or equivalent)
Technical Specifications
PL52SP3651 PL52TP3860 PL72SP3651 PL72TP3860
216 lbs (98 kg) 216 lbs (98 kg) 247 lbs (112 kg) 247 lbs (112 kg)
50.75” x 36”
(1289 mm x 914 mm)
SEE “DIMENSIONS” SECTI ON ALSO
landing-to-landing
NOTE: Weights and dimensions are approximate and subject to change.
750 lbs. (340 kg)
Worm drive gear motor
operation; onboard LED indicator lights, including diagnostics for quick and easy reference; user adjustable
59.75” x 38”
(1518 mm x 914 mm)
landing-to-landing
50.75” x 36”
(1289 mm x 914 mm)
landing-to-landing
59.75” x 38”
(1518 mm x 914 mm)
landing-to-landing
Welded aluminum extrusion with powder coated structural steel base legs
panels
Formed aluminum safety pan with obstruction detectors, designed to stop lift upon contact with an obstacle.
Takes less than 15 lbs. (6.8 kg) of pressure to activate safety pan stop
Self-actuating 24” (610 mm)
All text and/or images contained in this document are proprietary and may not be shared, modified, distributed,
Page 2 of 2
CONCRETE PAD SPECIFICATIONS
NOTE: The pad dimensions in FIG. 2 can be used as a univers al pad (it will work f or the PL52SP3651,
PL72SP3651, PL52TP3860 and PL72TP3860 VPL lifts). This is an important consideration should
you decide to change to a turn platform in the future.
DIMENSIONS
PL52SP3651 and PL72SP3651
FIG. 1
PL52TP3860 and PL72TP3860
FIG. 2
Loading...