EZ-ACCESS Pathway Modular Gate Assembly Manual
Assembly Manual
Pathway® Modular Gate
For use with the Pathway® 3G Modular Ramp and Pathway Stair System
Gate shown on Pathway 3G Modular Ramp
Gate shown on Pathway Stair System
17025 04-03-17
LIFETIME WARRANTY. Please register at www.ezaccess.com/warranty-satisfaction.
© EZ-ACCESS®, a division of Homecare Products, Inc. All rights reserved.
All text and images contained in this document are proprietary and may not be shared, modified,
distributed, reproduced, or reused without the express written permission of EZ-ACCESS.
Click here to view detailed product descriptions and prices. Call 800-397-5899 to order today!
- 2 -
INTRODUCTION
The Pathway® 3G Modular Gate is universal and can be installed on a Pathway 3G Modular Ramp system or
at the top of a Pathway Stair System. Hinge can be installed on left or right. Before starting installation,
determine which side of the ramp or stair the hinge should be on and which direction the gate should swing
based on the specific installation and the end user’s desired placement.
ATTENTION INSTALLER AND END USER:
• For residential use only
• WARNING! THE PATHWAY 3G MODULAR GATE IS NOT DESIGNED TO BEAR WEIGHT. NEVER
HANG WEIGHT, OF ANY KIND, ON GATE, DAMAGE AND POSSIBLE INJURY COULD RESULT.
• Read and follow all labels, instructions, and warnings prior to assembly and use. For copies of complete
instructions, warnings, or for additional care, use, or safety information, call customer service at 1-800451-1903.
• Leave this ASSEMBLY MANUAL with the end user
• Do not use product until the installation is complete.
TOOLS TYPICALLY REQUIRED:
✓ Rubber mallet
✓ 1/8″ drill bit
✓ 5/16” drill bit
✓ 1/4” nut driver
✓ T-Handle Allen Wrench or similar tool
✓ 2 each 7/16” wrench, socket wrench, or adjustable wrench
✓ Pencil or similar marker
WARNINGS
• Use caution at all times. Proper maintenance and upkeep to the system components is vital. NOTE: The term
“system” refers to the entire Pathway access system, including, but no limited to, gate, stairs, ramp, platform,
risers, handrails, supports, transition plates, landing pad, and any/all hardware and components.
• Regularly check that all parts are in good condition and check the system for damage. Ensure all fasteners and
locking mechanisms are in place and tightened. If any part of the system is damaged, loose, or missing; DO
NOT USE until repairs can be made by a certified installer or other qualified person.
• Do not use product for anything other than its intended purpose.
• Never play on or near the product.
• Inspect product for damaged or missing parts before each use. Never use a damaged or unstable product.
• Observe and avoid all pinch points.
• Do not tamper with or attempt to modify system components.
• Do not attach planters, lights, adornments, decorations, clothing, fabrics, or other ornamentals or furnishings.
• If user has a mobility concern, or otherwise has a weakened condition, use system only with a qualified helper.
• Metal conducts electricity. Do not use near exposed wiring or hang lights from system components.
• Only use components supplied or approved by manufacturer with system.
• Do not sit, stand, or climb on guards, handrails, or gates.
INSTALLATION TABLE OF CONTENTS
o Installing Gate on A Pathway Modular Ramp Page 4
o Installing Gate on A Pathway Stair System Page 6
o Connecting A Stair Post To A Platform Post Page 9
- 3 -
1.
BASIC SYSTEM COMPONENTS
1.1. Because each installation is different, your system may or may not contain these basic components.
1.2. Ensure all components listed are present prior to assembly.
1.3. NOTE: Items not shown actual size.
PATHWAY 3G UNIVERSAL GATE
(QTY 1)
1/4”-20 X 2” LONG HEX CAP SCREW
(QTY 3)
#8-32 X 1/2” LONG HEX WASHER
HEAD THREAD CUTTING SCREW
(QTY 7)
1/4” -20 LOCKNUT (QTY 3)
1/4” FENDER WASHER (QTY 6)
GRAVITY LATCH (QTY 1)
Includes Latch & Latch Bar
1-1/2” DIAMETER TUBE PLUG
(QTY 4)
5/16”-18 X 5” HEX BOLT
(QTY 1)
1/4”-20 X 3/4” HEX BOLT
(QTY 3)
Used for Pathway Modular Stair
installation only
Used for Pathway Modular Stair
installation only
5/16”-18 X 3/4” HEX BOLT
(QTY 2)
5/16”-18 LOCKNUT
(QTY 2)
PATHWAY STAIR TO GATE
MOUNTING ADAPTER (QTY 1)
Used for Pathway Modular Stair
installation only
Used for Pathway Modular Stair
installation only
Used for Pathway Modular Stair
installation only
Loading...