V1/V2
MENU
+
E
yoyo
®
Underwater Fishing Camera without DVR
User Manual
Thank you for choosing EYOYO underwater fishing camera. Please read this
user manual carefully, and save it for future reference. If you need any
assistance, please feel free to contact our customer support team by mail
support@eyoyousa.com
Contents
Precaution
Monitor structure diagram
Package contents
Specification
Wire Connection diagram
Battery charging
Menu settings
The Fishing Float and hook installation
FAQ
3
4
7
7
6
12
9
13
2
Camera Structure diagram
5
Battery Structure diagram
6
8
Camera AV cable setup tips
10
Camera Viewing setup tips
11
Warranty service
15
Precaution
Read this user manual carefully before operating.
Please charge the battery before first time use, and use the supplied power
adapter only! We are not responsible for the problem caused by any other
power adapters.
To keep in good condition, please wash the camera and cable by soap or
warm water after using.
3
Monitor structure diagram
Display monitor with DVR function
V1/V2
MENU
-
+
②
④ ⑤ ⑥
①
V1/V2 : To change aspect ratio between 16:9 and 4:3
: To rotate display screen 0°, 90°, 180° or 270°
②
MENU: To access the settings menu
③
④
-&+ : To decrease or increase the setting’s value
⑤
: To power on /off the display screen
Release button: Press both buttons to release monitor
⑧
Gap: Gap between the monitor and the carrying case frame for inserting
the monitor’s Sunshade
⑨
③
⑦⑥⑧
⑨
4
3-way splitter cable: Red for power input from battery, black for power
output to camera, yellow for video input from camera
①
⑦
Camera Structure diagram
①
②
③
④
⑤
⑥
①
IR/LED lights
Lens
②
AV Cable
③
Camera power cable
④
LED power cable
⑤
Video RCA Male cable
⑦
5
6
Battery Structure diagram
①
Battery
Y-Shaped splitter cable
②
①
②
③
④
red for power output to monitor
③
black for power output to
LED light/ for battery charger
④
②
③ ④
①
①
②
③
④
Battery Red cable Power output to monitor
Battery black cable Power output to camera IR ( or led) lights
Monitor black cable power output to camera
Monitor Yellow cable to camera video output
Camera system cable connection
Specification:
Monitor screen
Screen resolution
Osd Language
Camera Lens
Camera Focus
Camera Visible distance(clear water)
Power supply
Battery
Working time
Charging time
Working Temp
Storage Temp
7" TFT Screen
800*480P
English/France/Germany/Italy/Spain/
Portugal/Russian/Japanese/Chinese
HD 1000 TV lines
3.6 mm
1m/3.3ft
DC 12.6V
4500mAh Lithium Battery pack
9-12hours
10 hours
-20~60℃/ -4~140 F
-30~70℃/ -22~158 F
Package contents:
1x 7” Monitor 1x Sunshade
1x Camera with AV cable 1x Carrying case
1x Power adapter 1x Battery
1x Float 6 x Plastic ring
1x Metal clip set 1x User manual
7
Main Menu settings:
Press MENU button to access the settings menu interface.
Then press - or + buttons to adjust the setting’s value. (0-100)
Brightness
The default value is 50, press - or + buttons to adjust its value
according to your preference.
Contrast
The default value is 50, press - or + buttons to adjust its value
according to your preference.
Color
The default value is 50, press - or + buttons to adjust its value
according to your preference.
Zoom
The default display aspect ratio is 16:9; press - or + buttons to
change its ratio between 16:9 and 4:3
Down
The default display angle is 0° , press - or + buttons to rotate
display screen 0°, 90°, 180° or 270°
Language
The default language is English, press - or + buttons to option
other OSD language.
8
Use a short fishing line to attach to the float to the camera AV cable.
(See picture figure )
Tie a hook onto the end of your fishing line.
Place one more 2 to 3 inches above the first hook (See picture figure ).
Tie the fishing line onto the groove at the end of the camera unit.
Do not tie the fishing line onto the camera AV cable, because it might
destroy it. (See picture figure )
The Fishing Float and hook installation
① ②
Fishing Float installation
Fishing Hook installation
①
②
9
③
③
Two methods to set the camera AV cable on the fishing rod, just for you
reference!
Method 1--- by plastic rings (
Method 2--- by metal clips (See picture figure )
See picture figure )
①
Camera AV cable setup tips
②
①
②
10
Camera Viewing setup tips
1.For ice fishing application, this vertical-viewing setup is very helpful while
fishing in shallow water. You can rig the camera for fishing and live view
within the same hole when ice fishing.
2.For open water application, this vertical-viewing setup is ideal for other
vertical applications,such as inspecting the bottom of the river. Fishes usually
like to dwell near the bottom.
Vertical-viewing setup (as shown in figure )
Simply drop the camera into the water to view the bottom of the river and
the weight of the camera will keep the camera down while the boat is drifting
or slow-trolling.
1.For ice fishing application, this horizontal-viewing setup is used as a search
tool.
Drill a series of holes through the ice, drop the camera down each hole in
search for the best spot. Once you’ve located the fishing spot, drill a hole
2 or 3 feet away from the hole you’re actually going to fish in. Set the camera
on the ice and lower the camera down the second hole.
2.For open water application,this horizontal-viewing setup is used as a tool
to locate fish in a larger area!
Simply drop the camera into the water to search for the fishes and keep
the camera looking forward while the boat is drifting or slow-trolling.
Horizontal-viewing (as shown in figure )
11
①
②
① ②
Charging the Battery
Safety tips:
For safety concerns, it is recommended that you place the battery on a hard
surface like cement or tile when charging it, away from any flammable materials.
Be sure to disconnect the charger from the wall when not in use, and avoid
leaving your battery hooked up to the charger for extended periods of time.
To charge the battery:
1) Use this supplied power adapter to charge this battery.
2) Battery has two “piggyback” terminals on its wiring harness. Simply couple
the end of the power adapter with the Led terminal of the battery’s wiring
harness.
3) Plug this power adapter into a 110~220 volt AC wall outlet.
Red LED lights up on the power adapter when battery charging, and
green led lights up after the battery was fully charged.
5) It takes up to 9~10 hours for battery charging. Anyway, you can disconnect
the charger from the battery and wall outlet during the time. It is no harm
to your battery.
4)
Battery charging diagram
12
5. If the camera becomes hung up, what to do?
If the camera becomes hung up, back up from the direction you were
traveling from and slowly try to back the camera out of the snag. DO NOT
pull directly upward with force unless all other avenues have been pursued.
6. Can I use this camera system in saltwater?
Yes. All cameras are saltwater-rated,constructed with stainless steel hardware
and materials that are impervious to corrosion.
We recommend rinsing salt water off camera using clean water and a soft
cloth after every use.
7. Will my unit work in cold weather conditions?
Cameras are designed to operate at temperatures ranging from -10 to
120 degrees F. But its battery life might decrease in cold conditions.
8. How wide is the camera lens view angle?
Camera lens has a viewing angle of 92 degrees. At 4-1/2 feet in front of
the camera you can view an image approximately 6 feet wide.
Frequently Asked Questions
1. How far can I see?
About 3.3 feet. 2 feet of visibility is sufficient for underwater viewing in
very clear water.
2. When do I use the lights?
The lights in the camera are designed for use in low-light conditions. Turn
the lights on for enhanced visibility in low light conditions.
3. How do I steer the camera?
Set up camera in Horizontal-viewing way, and then hold camera AV cable
and troll it in a slow speed (less than 2 mph). The camera will face in the
boat’s direction of travel. If you are facing and moving forward, so will the
camera.
4. How fast can I troll with my camera?
It depends on depth, and also on the length of cable you have out.
Generally, for optimal viewing, we recommend going less than 2 miles per
hour.
The deeper you go, with more cable out, the more water resistance there
will be from camera. So that requires slower travel for good viewing.
13
9. Can I connect this camera to a larger monitor?
Not sure. It depends on your extra larger monitor compatible with this
video signal from this camera or not!
10. The screen lights up but I see no picture.
Camera AV cable and power cable are disconnected. Plug the camera
connector into monitor connector, yellow to yellow, black to black!
Or else, camera cable connectors might be damaged.
11. The led (or IR) cannot light up.
Camera Led power cable is disconnected. Plug the power adapter Led
connector into camera Led connector, black to black!
R
o
H
S
MADE IN CHINA
Join EYOYO Community:
facebook@Eyoyo
twitter@EyoyoLtd
English:support@eyoyousa.com
France:support-fr@eyoyousa.com
Italy:support-it@eyoyousa.com
Spain:support-es@eyoyousa.com
Germany:support-de@eyoyousa.com J
apan:support-jp@eyoyousa.com
Customer Support:
Eyoyo is dedilated to offer the best serice.To reach Eyoyo
customer support.Please email us;
14
Product warranty card
Name :
Product Name:
Model:
Purchasing Date:
Order id:
Breakdown Description:
15
Country:
Loading...