Extron electronics XPA U 358, XPA U 358-100V, XPA U 358-70V, XPA U 1004, XPA U 1004-70V, XPA U 1004-100V, XPA U 1004C-70V, XPA U 1004C-100V, XPA U 1002, XPA U 1002-70V, XPA U 1002-100V, XPA U 358C-100V, XPA U 358C-70V User Manual
Specifications and Main Features
Frequently Asked Questions
User Manual
User Guide
Audio Products
XPA Ultra Series:
XPA U 358, XPA U 358-70V, XPA U 358-100V, XPA U 358C-70V, XPA U 358C-100V
XPA U 1004, XPA U 1004-70V, XPA U 1004-100V, XPA U 1004C-70V, XPA U 1004C-100V
XPA U 1002, XPA U 1002-70V, XPA U 1002-100V
Half-Rack Audio Power Amplifiers
68-3149-01 Rev. B
01 19
Safety Instructions
Safety Instructions • English
WARNING: This symbol, , when used on the product, is intended to
alert the user of the presence of uninsulated dangerous voltage within the
product’s enclosure that may present a risk of electric shock.
ATTENTION: This symbol, , when used on the product, is intended
to alert the user of important operating and maintenance (servicing)
instructions in the literature provided with the equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer darauf
aufmerksam machen, dass im Inneren des Gehäuses dieses Produktes
gefährliche Spannungen herrschen, die nicht isoliert sind und die einen
elektrischen Schlag verursachen können.
VORSICHT:Dieses Symbol auf dem Produkt soll dem Benutzer in
der im Lieferumfang enthaltenen Dokumentation besonders wichtige
Hinweise zur Bedienung und Wartung (Instandhaltung) geben.
Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in
den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer
68-290-01) auf der Extron-Website, www.extron.com.
Instrucciones de seguridad • Español
ADVERTENCIA:Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del
producto, lo que puede representar un riesgo de descarga eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa
al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con el
equipo.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y temas
relacionados, consulte la Guía de cumplimiento de normativas y seguridad
de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.
Instructions de sécurité • Français
AVERTISSEMENT : Ce pictogramme, , lorsqu’il est utilisé sur le
produit, signale à l’utilisateur la présence à l’intérieur du boîtier du
produit d’une tension électrique dangereuse susceptible de provoquer
un choc électrique.
ATTENTION : Ce pictogramme, , lorsqu’il est utilisé sur le produit,
signale à l’utilisateur des instructions d’utilisation ou de maintenance
importantes qui se trouvent dans la documentation fournie avec le
matériel.
Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron, réf.
68-290-01, sur le site Extron, www.extron.com.
Istruzioni di sicurezza • Italiano
AVVERTENZA:Il simbolo, , se usato sul prodotto, serve ad
avvertire l’utente della presenza di tensione non isolata pericolosa
all’interno del contenitore del prodotto che può costituire un rischio di
scosse elettriche.
ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad avvertire
l’utente della presenza di importanti istruzioni di funzionamento e
manutenzione nella documentazione fornita con l’apparecchio.
Per informazioni su parametri di sicurezza, conformità alle normative,
compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento
alla Guida alla conformità normativa e di sicurezza di Extron, cod. articolo
68-290-01, sul sito web di Extron, www.extron.com.
Instrukcje bezpieczeństwa • Polska
OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma na celu
poinformować użytkownika o obecności izolowanego i niebezpiecznego
napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie
porażenia prądem elektrycznym.
UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do
ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji
(obsługi) w literaturze, wyposażone w sprzęt.
Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji
wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne,
zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część
numer 68-290-01, na stronie internetowej Extron, www.extron.com.
Инструкция по технике безопасности • Русский
ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан
на продукте, предупреждает пользователя о наличии
неизолированного опасного напряжения внутри корпуса
продукта, которое может привести к поражению
электрическим током.
ВНИМАНИЕ: Данный символ, , если указан на продукте,
предупреждает пользователя о наличии важных инструкций
по эксплуатации и обслуживанию в руководстве,
прилагаемом к данному оборудованию.
Для получения информации о правилах техники безопасности,
соблюдении нормативных требований, электромагнитной
совместимости (ЭМП/ЭДС), возможности доступа и других
вопросах см. руководство по безопасности и соблюдению
нормативных требований Extron на сайте Extron: ,
All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks (®), registered service marks (SM), and trademarks (TM) are the property of RGBSystems, Inc. or
ExtronElectronics (see the current list of trademarks on the Terms of Use page at www.extron.com):
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to the
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part15 of the FCC rules. These limits provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. There is no guarantee that interference will not
occur. If this equipment does cause interference to radio or television reception, which can
be determined by turning the equipment off and on, you are encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
• Consult the dealer or an experienced radio/TV technician for help.
In order to maintain compliance with FCC regulations, shielded cables must be used with this
equipment. Operation with non-approved equipment or unshielded cables is likely to result in
interference to radio and TV reception. The user is cautioned that changes and modifications
made to the equipment without the approval of the manufacturer could void the user’s authority
to operate this equipment.
following two conditions: (1) This device may not cause harmful interference, and (2) This
device must accept any interference received, including interference that may cause
undesired operation.
connected.
NOTE:For more information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics see the Extron Safety and Regulatory
Compliance Guide on the Extron website.
Conventions Used in this Guide
Notifications
The following notifications are used in this guide:
DANGER:
• Will result in serious injury or death.
• Entraînera des blessures graves ou la mort.
WARNING: Potential risk of severe injury or death.
AVERTISSEMENT : Risque potentiel de blessure grave ou de mort.
CAUTION: Risk of minor personal injury.
ATTENTION : Risque de blessuremineure.
ATTENTION:
• Risk of property damage.
• Risque de dommages matériels.
NOTE: A note draws attention to important information.
TIP: A tip provides a suggestion to make working with the application easier.
Specifications Availability
Product specifications are available on the Extron website, www.extron.com.
Extron Glossary of Terms
A glossary of terms is available at http://www.extron.com/technology/glossary.aspx.
Amplifier Enters Standby Mode Too Early ....... 21
Limiter/Protect LED Warning Indicators.......... 21
Over Temp Indicator LED ............................... 21
viXPA Ultra Series Power Amplifiers • Contents
Introduction
About this Manual
This manual contains information about the Extron XPA Ultra Series of power amplifiers:
• XPA U 358 eight channel low impedance power amplifier
• XPA U 358-70V eight channel 70 volt power amplifier
• XPA U 358-100V eight channel 70 volt power amplifier
• XPA U 358C-70V eight channel combination low impedance and 70 volt power amplifier
• XPA U 358C-100V eight channel combination low impedance and 70 volt power
amplifier
• XPA U 1004 four channel low impedance power amplifier
• XPA U 1004-70V four channel 70 volt power amplifier
• XPA U 1004-100V four channel 100 volt power amplifier
• XPA U 1004C-70V four channel combination low impedance and 70 volt power
amplifier
• XPA U 1004C-100V four channel combination low impedance and 100 volt power
amplifier
• XPA U 1002 two channel low impedance power amplifier
• XPA U 1002-70V two channel 70 volt power amplifier
• XPA U 1002-100V two channel 100 volt power amplifier
Terms Used in this Manual
Features
The terms “amplifier” and “power amplifier” are used interchangeably in this manual to refer
to all of the XPA Ultra models.
• Output Power
• XPA U 358 models — 35 watts rms output power per channel, all channels driven.
• XPA U 1004 models — 100 watts rms output power per channel, all channels
driven.
• XPA U 1002 models — 100 watts rms output power per channel, all channels
driven.
• ENERGY STAR® qualified amplifiers — The XPA Ultra Series are ENERGY STAR
qualified amplifiers and energy efficient products that conserve energy and reduce
costs.
XPA Ultra Series Power Amplifiers • Introduction1
• Extron Patented CDRS - Class D Ripple Suppression — CDRS is an Extron
Patented technology that provides a smooth, clean audio waveform and an
improvement in signal fidelity over conventional Class D amplifier designs. CDRS
eliminates the high frequency switching ripple characteristics of Class D amplifiers,
a source of RF emissions which can interfere with sensitive AV equipment such as
wireless microphones.
• Convection cooled, fanless operation - can be stacked without extra rack
space for ventilation — The XPA Ultra Series amplifiers do not require internal fans
or vents for cooling, ensuring quiet, reliable operation. They generate substantially less
heat than conventional power amplifiers, making them ideal for rack-mount applications
where space is at a premium.
• Eight channels (XPA U 358 models), four channels (XPA U 1004 models), or two
channels (XPA U 1002 models) in a 1U, half rack width enclosure - single and
dual rack mount hardware included — The channel density of the XPA Ultra Series
amplifiers reduce rack space requirements for many installations. The included single
and side by side rack mount hardware simplifies planning and saves cost.
• Defeatable auto-standby with fast wake up — The XPA Ultra Series amplifiers
meet ENERGY STAR qualification requirements with an auto-standby feature that
automatically places the amplifier into standby after 25 minutes of inactivity, dramatically
reducing power consumption. The XPA Ultra Series amplifiers quickly return to full
power status in less than 100 ms upon signal detection, with minimal inrush current.
Auto-standby can be disabled if required.
• UL 2043 plenum rated when used with optional Flexible Conduit Adapter
Kit — The XPA Ultra Series amplifiers meet UL 2043 for smoke and heat release for
installation within a plenum airspace above a drop ceiling when used with the optional
Flexible Conduit Adapter Kit. Above-the-ceiling placement conceals the amplifier to
prevent theft, and is convenient for installing equipment when space inside the room is
limited.
• Professional grade signal-to-noise and THD+N performance — The
XPAUltraSeries amplifiers deliver professional grade performance, featuring 100 dB
signal-to-noise ratio and THD+N of less than 0.1%.
• Ultra low inrush current at power up - no need for power sequencing —
Allows multiple XPA Ultra Series amplifiers to be powered on simultaneously without
overloading power circuits. This eliminates the need for power sequencing.
• Power factor correction - removes harmonic content on AC line — The
XPAUltraSeries amplifiers feature power factor correction technology that smooths
out the high peak currents of the amplifiers’ current draw, minimizing the presence of
high frequency harmonics on the AC power line, preventing audible artifacts from being
transmitted to other audio equipment in the system.
signals for adjusting audio system gain staging. These controls are located on the rear
panel to prevent tampering with level adjustments. Laser etched markings provide
enhanced visibility of settings for ease of configuration.
• Automatic clip limiter — Detects actual onset of clipping. Gain is automatically
reduced without audible artifacts to protect speakers from clipping distortion.
• Multiple protection circuits — Active during output shorts, thermal overload, or DC
faults to prevent damage to the amplifier and speakers.
• Remote standby port — Enables the XPA Ultra Series amplifiers to be remotely
powered down when not in use, reducing operating cost.
XPA Ultra Series Power Amplifiers • Introduction2
• High pass filter for high impedance models — This selectable filter, available on the
XPA Ultra Series high impedance models, rolls off frequencies below 80 Hz to prevent
saturation of speaker transformers.