Extron Electronics UCM 100 EU AAP Removal Procedure User Manual
UCM 100 EU AAP Removal Procedure for MLC 62 EU
The UCM 100 EU AAP wallplate enables an
MLC 62 EU controller to be mounted in a quadruple
space architectural adapter plate (AAP) frame in areas
of limited space. The controller can be mounted either
horizontally or vertically within the UCM 100 frame to
fit the available mounting space (see the illustrations at
right).
If it becomes necessary to remove the controller from the UCM 100 following installation,
follow these steps:
1. Remove the UCM 100 with the controller from the AAP plate.
2. From the rear of the unit, pinch the two tabs on the opposite sides of the controller
inward.
3. While continuing to hold in the tabs, slide the controller out through the front of the
frame.
Tx/
Tx
2
1
C
IR
RELAYS
IR/ S
RS-232
N/O
0.2A max
CONFIG
12V
INPUT
HOST/
DIGITAL
R
PWR
1
Rx
Tx
+
© 2011 Extron® Electronics. All rights reserved. www.extron.com
Push Tabs
to Release
DISPLAY
ON
OFF
VOLUME
PC
VIDEO
MUTE
LAPTOP
Extron
UCM 100 EU AAP
DISPLAY
OFF
ON
VOLUME
VIDEO
PC
MUTE
MLC 62 RS EU
LAPTOP
DISPLAY
ON
OFF
VOLUME
PC
VIDEO
MUTE
LAPTOP
Extron
68-1731-52
Rev. A
06 11
Loading...