Extron Electronics PS PoE User Manual

PS PoE Power Supply Kit

The Extron PS PoE Kit can be used to provide power over Ethernet (PoE) to network-connected products that require an 802.3af compliant power inserter, or to replace PoE power supplies of the same capacity.

To connect the power supply:

1. Connect the PoE device cable to the Pwr LAN-Out port.

PWR LAN-OUT LAN-IN

To Local Area Network (LAN)To PoE-powered Device

Power over Ethernet (PoE) Power Supply Connection

2. Connect the network cable to the LAN-In port.

3. Connect AC power to the PoE power supply.

CAUTION: See the

Extron USA - West Headquarters

+800.633.9876 Inside USA/Canada Only

+1.714.491.1500 +1.714.491.1517 FAX

Extron Safety and Regulatory Compliance Guide

Extron USA - East

+800.633.9876

Inside USA/Canada Only

+1.919.863.1794 +1.919.863.1797 FAX

Extron Europe

+800.3987.6673

Inside Europe Only

+31.33.453.4040 +31.33.453.4050 FAX

Extron Asia

+800.7339.8766

Inside Asia Only

+65.6383.4400 +65.6383.4664 FAX

LED Indicator

A multi-color LED on the top of the enclosure indicates its operation:

LED Color Description

Amber AC power is on. Green A PoE device is connected and drawing power. Blinking A PoE device is drawing excessive current.

Reference

Model Part Number Power Output Connections

PS PoE 70-828-01

(PW182RB4800F01)

, part number 68-290-01, for safety instructions.

Extron Japan

+81.3.3511.7655 +81.3.3511.7656 FAX

Extron China

+400.883.1568

Inside China Only

+86.21.3760.1568 +86.21.3760.1566 FAX

17 watts, +48 VDC,

0.35 A max.

Extron Middle East

+971.4.2991800 +971.4.2991880 FAX

Ethernet: Dual RJ-45 AC Power: IEC

68-2015-50

Rev. A

02 11