Extron Electronics MBD 123 User Manual

MBD 123 1U Full Rack Width Mounting Kit

Extron USA - Wes t

Headqua rters

+800.6 33.9876

Inside USA / Canada Only

+1.714.491.1500

Extron USA - Ea st

+800.6 33.9876

Inside USA / Canada Only

+1.919.863.1794
+1.919.863.1797 FA X

Extron Eur ope

+800. 3987.6673

Inside Europe Only

+31.33.4 53.4040
+31.33.4 53.4050 F AX

Extron Asi a

+800.7 339.8766

Inside Asia Only

+65.6 383.440 0
+65.6 383.466 4 FAX

Extron Japa n

+81.3.35 11.7655
+81.3.35 11.7656 FAX

Extron Chi na

+400. 883.1568

Inside China Only

+86.21. 3760.1568
+86.21. 3760.1566 FA X

Extron Mid dle East

+971.4.2 991800
+971.4.2 991880 FA X

N Only 1U full rack width products can be mounted using this kit

(part number 70-485-01).

This kit allows the product to be mounted to the vertical rack supports and
face either the front or the rear of the rack. Refer to the drawing on the
opposite side of this card.

Rack Mounting Instructions

1. Remove any installed rubber feet from the unit.

2. Remove two screws from one side of the unit. Retain the screws for

possible later reassembly.

3. Attach one bracket to the side of the unit using the longer screws

included in the kit.

4. Repeat steps 2 and 3 on the other side of the unit.

5. Mount the unit to the rack using the four included rack mounting screws.

Mounting Kit Contents

• 2 mounting brackets (left and right)

• 4 side bracket mounting screws

• 4 rack mounting screws

Installation Example

68-1080-01, Rev. B

01 10