Extron Electronics IN1501 User Manual
IN1501 COMPOSITE VIDEO TO S–VIDEO /
S–VIDEO TO COMPOSITE VIDEO TRANSCODER
IN1501
OPER AT ION MANUAL
Installation and Safety Instructions
For Models without a Power Switch:
The socket outlet shall be installed near the equipment and shall be accessible.
For all Models:
No serviceable parts inside the unit. Refer service to a qualified technician.
For Models with Internal or External Fuses:
For continued protection against fire hazard, replace only with same type and rating of fuse.
Instructions d’installation et de sécurité
Pour les modèles sans interrupteur de courant:
La prise de courant d’alimentation sera installé près de l’équipement et sera accessible.
Pour tout les modèles:
Pas de composants à entretenir à l’intérieur. Confiez toute réparation à un technicien qualifié.
Pour les modèles équipés de fusibles internes ou externes:
Afin d’éviter tout danger d’incendie, ne remplacer qu’avec le même type et la même valeur de fusible.
Installations- und Sicherheitshinweise
Für Geräte ohne Netzschalter:
Die Netzsteckdose soll in der Nähe des Gerätes installiert und frei zugänglich sein.
Für alle Geräte:
Keine Wartung innerhalb des Gerätes notwendig. Reparaturen nur durch einen Fachmann!
Für Geräte mit interner oder externer Sicherung:
Für dauernden Schutz gegen Feuergefahr darf die Sicherung nur gegen eine andere gleichen Typs und gleicher Nennleistung
ausgewechselt werden.
Instalacion E Instrucciones de Seguridad
Modelos Sin Interruptor:
Para Todos Los Modelos:
Modelos con Fusibles Internos o Externos:
La conexión debe ser instalada cerca del equipo y debe ser accesible.
Dentro de la unidad , no hay partes para reparar. Llame un tecnico calificado.
Para prevenir un incendio, reemplace solo con el mismo tipo de fusible.
CE COMPLIANCE
All products exported to Europe by Inline, Inc. after January 1, 1997 have been tested and found to
comply with EU Council Directive 89/336/EEC. These devices conform to the following
standards:
EN50081-1 (1991), EN55022 (1987)
EN50082-1 (1992 and 1994), EN60950-92
Shielded interconnect cables must be employed with this equipment to ensure compliance with
the pertinent Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC)
standards governing this device.
FCC COMPLIANCE
This device has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide against harmful
interference when equipment is operated in a commercial environment. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with th e
instruction manual, may cause harmful interference to radio communications. Operation of
equipment in a residential area is likely to cause harmful interference, in which case the user will be
required to correct the interference at their own expense.
Product Overview
DESCRIPTION
The IN1501 is a high quality bi-directional transcoder for composite video and S-Video
signals. Featuring advanced digital signal processing techniques, the unit offers both
composite video to S-Video transcoding and S-Video to composite video transcoding
capabilities. The IN1501 is an excellent choice for a variety of applications requiring video
signal conversion between these popular video formats.
PRODUCT FEATURES
Simultaneous Bi-Directional Operation - Designed with two separate sets of video signal
conversion circuitry, the IN1501 is capable of providing composite video to S-Video
transcoding for one signal, while at the same time offering S-Video to composite video
transcoding for a second signal. Simultaneous bi-directional conversion adds great utility to
the product since both types of transcoding functionality are available in a single compact
unit.
1
NTSL / PAL Compatible - The IN1501 is compatible with composite and S-Video signals
in the NTSC (M), PAL (B, D, G, H, & I), SECAM and NTSC 4.43 video standards. The
transcoder senses the input signal standard and adjusts its operation accordingly.
Front Panel Controls - provide easy access to advanced digital signal processing circuitry
that allows users to achieve optimal video quality. A Color Bar Generator provides a test
signal and also allows operators to manually adjust the hue of their display device. The
Adaptive Comb Filter switch allows users to select between the adaptive comb filter and the
trap filter. The Video Noise Filter can be enabled / disabled using the front panel controls as
well. Note: The front panel controls are only functional in S-Video output applications.
Rack Mountable - Two IN1501 transcoders can be rack mounted side-by-side in a 1U rack
space using the optional IN9080 rack shelf. A single IN1501 can be rack mounted with the
IN9080 rack shelf and an IN9088B blank plate.
Compatibility
INPUT
The IN1501 Video Transcoder accepts analog video signals in the NTSC, PAL, SECAM and
NTSC 4.43 video standards. The unit automatically senses the input signal and transcodes it
appropriately.
© 2000 - Inline, Inc. IN1501 Operation Manual - Preliminary 08/03/00
Loading...