Extron electronics HD CTL 100 Setup Manual
IMPORTANT:
POWER
12V
0.3A MAX
INPUT
OUTPUT
+V OUT
DIGITAL I / O
HDMI
G 24
IR / S
SG
21 G
43 G
HDMI/CEC
Sales Update
1/4
2/4
3/4
4/4
Microsoft
Teams Rooms
Laptop
(HDMI)
HD CTL 100
(HDMI & CEC)
logitech
logitech
12:05 PM
Camera/
Mic/Speaker
Device
Go to www.extron.com for the
complete user guide and installation
HD CTL 100 Workspace Controller • Setup Guide
instructions before connecting the
product to the power source.
with Microsoft Teams Rooms (MTR)
This is a supplementary setup guide for properly setting up the HD CTL 100 with Microsoft Teams Rooms (MTR) (formerly known
as Skype Room Systems).
The Extron HD CTL 100 is a compact workspace
controller designed for automatic display control
in small meeting rooms and huddle spaces. It
features an HDMI pass-through port that detects
signal presence. When an active signal is
connected to the HDMI input from the
Microsoft Teams Rooms (MTR) device, the
HD CTL 100 automatically turns on the display
via CEC control. When no signal is detected,
the HD CTL 100 powers off the display after a
predetermined period.
For advanced room automation and integration with
optional room occupancy sensors, or the control of
display via RS-232 (or infrared) using the
Conguration Program, reference the full
HD CTL 100 Workspace Controller Setup Guide,
available at www.extron.com.
NOTE: For more details about installation,
conguration, and operation, see the
HD CTL 100 User Guide, available at
www.extron.com.
HD CTL 100 Panels
The front and rear panel connectors include:
Rear Panel
POWER
12V
0.3A MAX
INPUT
AA
A
B
C
D
Figure 1. HD CTL 100 Rear and Front Panels
BB
Power input connector E Voltage output connector
HDMI input connector F IR/S control connector
HDMI/CEC output connector G Power LED
Digital I/O ports
OUTPUT
HDMI/CECHDMI
CC
21G43G
DD
+V OUTDIGITAL I / O
IR / S
SG
G 24
EE FF
Example of Microsoft Teams Rooms (MTR)
HH
G
R
SIGNAL
CONFIG
JJ
II
Reset button
H
USB configuration port
I
Signal LED
J
Front Panel
HD CTL 100
1
HD CTL 100 – Microsoft Teams Rooms (MTR) • Setup Guide
POWER
12V
0.3A MAX
INPUT
OUTPUT
+V OUTDIGITAL I / O
HDMI/CECHDMI
G 24
IR / S
S G
21 G 43 G
HD CTL 100
Workspace
Controller
HDMI
HDMI
Display
Laptop
HDMI/CEC
Camera/Mic/Speaker
USB
logitech
logitech
12:05 PM
Microsoft Teams
Rooms (MTR)
POWER
12V
0.3A MAX
INPUT
OUTPUT
+V OUTDIGITAL I / O
HDMI/CECHDMI
G 24
IR / S
S G
21 G 43 G
HD CTL 100
HDMI
HDMI
Display
Display
Laptop
HDMI/CEC
POWER
12V
0.3A MAX
INPUT
OUTPUT
+V OUTDIGITAL I / O
HDMI/CECHDMI
G 24
IR / S
S G
21 G 43 G
HDMI
HDMI/CEC
HD CTL 100
USB
12:05 PM
Camera/
Mic/
Speaker
Microsoft Teams
Rooms (MTR)
logitech
logitech
Connecting Microsoft Teams Rooms (MTR) to the HD CTL 100
1. Connect the provided power supply to the device running MTR.
2. For a Single Display system, connect an HDMI cable from either of the MTR HDMI OUT connectors to the Input connector
on the HD CTL 100 (see figure 2).
Figure 2. HD CTL 100 Cabling Diagram (Single Display)
3. For a Dual Display system, you will need a second HD CTL 100. Connect HDMI cables from both of the MTR HDMI OUT
connectors to the Input connectors of the two HD CTL 100s (see figure 3).
Figure 3. HD CTL 100 Cabling Diagram (Dual Display)
NOTE: The displays in the gures 2 and 3 are controlled via CEC, which is accomplished using the same HDMI cables
2
for transporting video from the Microsoft Teams Rooms to the display. For instances where the displays do not support
CEC, use RS-232 or IR control. Enabling CEC on some displays may be required. Please consult the display manual for
instructions.
Loading...