Extron electronics DTP CrossPoint 4K IPCP SA, DTP CrossPoint 84 4K, DTP CrossPoint 4K, DTP CrossPoint 4K IPCP MA, DTP CrossPoint 82 4K Setup Manual

Setup Guide

Matrix Switcher

DTP CrossPoint 4K Series

Scaling Presentation Matrix Switcher

68-2368-51 Rev. B

10 19

Safety Instructions

Safety Instructions • English

WARNING: This symbol, , when used on the product, is

intended to alert the user of the presence of uninsulated
dangerous voltage within the product’s enclosure that may

present a risk of electric shock

ATTENTION: This symbol, , when used on the product, is

intended to alert the user of important operating and
maintenance (servicing) instructions in the literature provided
with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.

Sicherheitsanweisungen • Deutsch

WARNUNG: Dieses Symbol auf dem Produkt soll den

Benutzer darauf aufmerksam machen, dass im Inneren
des Gehäuses dieses Produktes gefährliche Spannungen
herrschen, die nicht isoliert sind und die einen elektrischen
Schlag verursachen können.

VORSICHT: Dieses Symbol auf dem Produkt soll dem

Benutzer in der im Lieferumfang enthaltenen Dokumentation
besonders wichtige Hinweise zur Bedienung und Wartung
(Instandhaltung) geben.

Weitere Informationen über die Sicherheitsrichtlinien,
Produkthandhabung, EMI/EMF-Kompatibilität, Zugänglichkeit und
verwandte Themen finden Sie in den Extron-Richtlinien für Sicherheit
und Handhabung (Artikelnummer 68-290-01) auf der Extron-Website,

www.extron.com.

Instrucciones de seguridad • Español

ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,

avisa al usuario de la presencia de voltaje peligroso sin aislar
dentro del producto, lo que puede representar un riesgo de
descarga eléctrica.

ATENCIÓN: Este símbolo, , cuando se utiliza en el producto,

avisa al usuario de la presencia de importantes instrucciones
de uso y mantenimiento recogidas en la documentación
proporcionada con el equipo.

Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y
temas relacionados, consulte la Guía de cumplimiento de normativas
y seguridad de Extron, referencia 68-290-01, en el sitio Web de Extron,

www.extron.com.

Instructions de sécurité • Français

AVERTISSEMENT: Ce pictogramme, , lorsqu’il est utilisé

sur le produit, signale à l’utilisateur la présence à l’intérieur
du boîtier du produit d’une tension électrique dangereuse
susceptible de provoquer un choc électrique.

ATTENTION: Ce pictogramme, , lorsqu’il est utilisé sur le produit,

signale à l’utilisateur des instructions d’utilisation ou de
maintenance importantes qui se trouvent dans la documentation
fournie avec le matériel.

Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron, réf.
68-290-01, sur le site Extron, www.extron.com.

.

Istruzioni di sicurezza • Italiano

AVVERTENZA: Il simbolo, , se usato sul prodotto,

serve ad avvertire l'utente della presenza di tensione
non isolata pericolosa all'interno del contenitore
del prodotto che può costituire un rischio di scosse
elettriche.

ATTENTZIONE: Il simbolo, , se usato sul prodotto,

serve ad avvertire l'utente della presenza di importanti
istruzioni di funzionamento e manutenzione nella
documentazione fornita con l'apparecchio.

Per informazioni su parametri di sicurezza, conformità alle normative,
compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento
alla Guida alla conformità normativa e di sicurezza di Extron, cod.

articolo 68-290-01, sul sito web d

i Extron, www.extron.com.

Instrukcje bezpieczeństwa • Polska

OSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma

na celu poinformować użytkownika o obecności izolowanego i
niebezpiecznego napięcia wewnątrz obudowy produktu, który
może stanowić zagrożenie porażenia prądem elektrycznym.

UWAGI: Ten symbol, , gdy używany na produkt, jest

przeznaczony do ostrzegania użytkownika ważne operacyjne
oraz instrukcje konserwacji (obsługi) w literaturze, wyposażone
w sprzęt.

Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji
wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy
pokrewne, zobacz Extron bezpieczeństwa i regulacyjnego zgodności
przewodnik, część numer 68-290-01, na stronie internetowej Extron,

www.extron.com.

Инструкция по технике
безопасности • Русский

ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан

на продукте, предупреждает пользователя о
наличии неизолированного опасного напряжения
внутри корпуса продукта, которое может привести к
поражению электрическим током.

ВНИМАНИЕ: Данный символ, , если указан на

продукте, предупреждает пользователя о наличии
важных инструкций по эксплуатации и обслуживанию в
руководстве, прилагаемом к данному оборудованию.

Для получения информации о правилах техники
безопасности, соблюдении нормативных требований,
электромагнитной совместимости (ЭМП/ЭДС), возможности
доступа и других вопросах см. руководство по безопасности
и соблюдению нормативных требований Extron на сайте

Extron: www.extron.com, номер по каталогу - 68-290-01.

安全说明 • 简体中文

警告： 产品上的这个标志意在警告用户该产品机壳内有暴露的危险

电 压 ，有 触 电 危 险 。

注意： 产品上的这个标志意在提示用户设备随附的用户手册中有

重要的操作和维护(维修）说明。

关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍
使用的特性等相关内容，敬请访问 Extron 网站 www.extron.com，参见

Extron 安全规范指南，产品编号 68-290-01。

安全記事 • 繁體中文

警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著

可能會導致觸電之風險的未絕緣危險電壓。

注意 若產品上使用此符號，是為了提醒使用者，設備隨附的用戶手冊

中有重要的操作和維護（維修）説明。

有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關
主題的詳細資訊，請瀏覽 Extron 網站：www.extron.com，然後參閱

《Extron 安全性與法規遵守手冊》，準則編號 68-290-01。

안전 지침 • 한국어

경고: 이 기호 , 가 제품에 사용될 경우, 제품의 인클로저 내에 있는

접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을
경고합니다.

주의: 이 기호 , 가 제품에 사용될 경우, 장비와 함께 제공된

책자에 나와 있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.

안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련
항목에 대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron

안전 및 규제 준수 안내서, 68-290-01 조항을 참조하십시오.

安全上のご注意 • 日本語

警告:この記号 が製品上に表示されている場合は、筐体内に絶縁さ

れていない高電圧が流れ、感電の危険があることを示してい
ます。

注意: この記号 が製品上に表示されている場合は、本機の取扱

説明書に 記載されている重要な操作と保守( 整備)の指示につい
てユーザーの 注意を喚 起するものです。

安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に
つ い て は 、エク ストロ ン の ウェブ サ イトwww.extron.comよ り 『 Extron
Safety and Regulatory Compliance Guide』 (P/N 68-290-01) をご覧く
ださい。

NOTE: For more information on safety guidelines, regulatory compliances,

EMI/EMF compatibility, accessibility, and related topics, see the “

and Regulatory Compliance Guide

” on the Extron website.

Copyright

© 2017-2019 Extron Electronics. All rights reserved. www.extron.com

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks, registered service marks, and trademarks are the
property of RGB Systems, Inc. or Extron Electronics (see the current list of trademarks on
the Terms of Use page at www.extron.com):

Registered Trademarks

(®)

Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager,
EDID Minder, FlatField, FlexOS, Glitch Free, GlobalConfigurator, Global Scripter,
GlobalViewer, Hideaway, HyperLane, HyperLane, IPIntercom, IPLink, KeyMinder,
LinkLicense, LockIt, MediaLink, MediaPort, NetPA, PlenumVault, PoleVault, PowerCage,
PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch, StudionStation,
SystemINTEGRATOR, TeamWork, TouchLink, VideoLounge, V-Lock, VN-Matrix,
VoiceLift, WallVault, WindoWall, XPA, XTP, XTPSystems, and ZipClip

Registered Service Mark

(SM)

: S3 Service Support Solutions

Trademarks(™

)

AAP, AFL (Accu-RATEFrameLock), ADSP(Advanced Digital Sync Processing),
Auto-Image, AVEdge, CableCover, CDRS(ClassDRippleSuppression), DDSP(Digital
Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator,
DSPConfigurator, DSVP(Digital Sync Validation Processing), eLink, EQIP, EverLast,
FastBite, Flex55, FOX, FOXBOX, IP Intercom HelpDesk, MAAP, MicroDigital, Opti-Torque,
PendantConnect, ProDSP, QS-FPC(QuickSwitch Front Panel Controller), Room
Agent, Scope-Trigger, ShareLink, SIS, SimpleInstructionSet, Skew-Free, SpeedNav,
Triple-Action Switching, True4K, Vector™ 4K, WebShare, XTRA, and ZipCaddy

Extron Safety

FCC Class A Notice

This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to part15 of the
FCC rules. The ClassA limits provide reasonable protection
against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment
in a residential area is likely to cause interference. This interference
must be corrected at the expense of the user.

ATTENTION:

• The Twisted Pair Extension technology works with

unshielded twisted pair (UTP) or shielded twisted
pair (STP) cables; but to ensure FCC Class A and CE
compliance, STP cables and STP Connectors are
required.

• La technologie extension paires torsadées fonctionne

avec les câbles paires torsadées blindées(UTP) ou non
blindées(STP). Afin de s’assurer de la compatibilité entre
FCC ClasseA et CE, les câbles STP et les connecteurs
STP sont nécessaires.

Battery Notice

This product contains a battery. Do not open the unit to
replace the battery. If the battery needs replacing, return

the entire unit to Extron (for the correct address, see the Extron
Warranty section on the last page of this guide).

CAUTION: Risk of explosion. Do not replace the battery with

an incorrect type. Dispose of used batteries according to the
instructions.

ATTENTION : Risque d’explosion. Ne pas remplacer la

pile par le mauvais type de pile. Débarrassez-vous des piles
usagées selon le mode d’emploi.

Conventions Used in this Guide

Notifications

ATTENTION:

• Risk of pr

•

Risque de dommages matériels.

NOTE: A note draws attention to important information.

TIP: A tip provides a suggestion to make working with the

application easier.

Software Commands

Commands are written in the fonts shown here:

^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]

E X! *X1&* X2)* X2#* X2! CE}

NOTE: For commands and examples of computer or device

responses mentioned in this guide, the character “0” is used
for the number zero and “O” is the capital letter “o.”

Computer responses and directory paths that do not have
variables are written in the font shown here:

Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron

Variables are written in slanted form as shown here:

ping xxx.xxx.xxx.xxx —t
SOH R

Selectable items, such as menu names, menu options, buttons,
tabs, and eld names are written in the font shown here:

From the File menu, select New.
Click the OK button.

operty damage.

Data STX Command ETB ETX

Specifications Availability

Product specications are available on the Extron website,

www.extron.com.

Contents

Introduction ................................ 1

About this Guide ........................... 1

About the DTP CrossPoint 4K

Series ........................................... 2

DTP Input and Output

Signals ...................................... 3

Installation

Rear Panel ..................................... 4

Video Inputs and Outputs ......... 4

Audio Inputs and Outputs ......... 7

Serial and IR Insertion

Control Connections ................. 9

Switcher Reset ........................ 10

Power ...................................... 11

Additional Connector

Front Panel .................................. 16

.................................. 4

Connections ............................. 8

Information ............................. 11

Front Panel Operations

Creating a Tie

Recalling a Preset ....................... 18

Viewing Ties ................................ 18

Assigning a Logo to an Output ... 19
Viewing and Adjusting Volume

and Mic Volume ......................... 19

Setting the Front Panel Locks

(Executive Modes) ..................... 20

Selecting Lock Mode 2 or

Toggling between Mode 2

and Mode 0 ............................ 21

Selecting Lock Mode 2 or

Toggling between Mode 2

and Mode 1 ............................ 21

............. 17

Remote Control ........................ 22

Selected SIS Commands ............ 22

Establishing a Network

(Ethernet) Connection ............ 22

Number of Connections .......... 23

Establishing a USB Port

Connection ............................. 23

Host-to-Switcher

Instructions ............................. 23

Common SIS Command

Symbols ................................. 23

SIS Command and

Response Table for Matrix

Switcher Commands .............. 24

Installing and Starting the

Control Programs ....................... 28

Installing the programs ............ 28

Starting the Product

Configuration Software .......... 30

Starting the DSP

Configurator Program ............ 31

Accessing the HTML Pages ........ 33

DTP CrossPoint 4K Series • Contents vii

viii DTP CrossPoint 4K Series • Contents

Introduction

This section gives an overview of the Extron
DTP CrossPoint 4K Series matrix switchers and describes their
features. Topics that are covered include:

• About this Guide

•

About this Guide

NOTE: For more information on subjects in this guide, see

This guide provides instructions for an experienced installer to
set up and operate the Extron DTP CrossPoint 4K Series matrix
switchers. Step by step instructions show you how to:

•

• Perform basic operations from the front panel (see Front

•

•

•

About the

the DTP CrossPoint 4K Series User Guide and the IPCP Pro
Series User Guide, at www.extron.com.

Connect the har

Panel Operations on page 17)

Use selected SIS commands (see

Response Table for Matrix Switcher Commands on

page24)

Load and start the contr

Product Configuration Software on page 30 and Starting
the DSP Configurator Program on page 31)

Connect to the built-in HTML pages (see

HTML pages, on page 33)

DTP CrossPoint 4K Series

dware (see Rear Panel on page 4)

SIS Command and

ol programs (see Starting the

Accessing the

DTP CrossPoint 4K Series • Introduction 1

About the DTP CrossPoint 4K Series

91

Speakers

Ext
DTP T

T

Medi

Screen Control

Ex
Contro
Ap

The matrix switchers distribute HDCP-compliant HDMI and
Extron proprietary DTP video and audio signal types (see gure1).
A matrix switcher routes any input signal to any combination of
outputs. It can route multiple input and output congurations
simultaneously.

Extron
TLP Pro 1220TG

12" Ta bletop
TouchLink Pro
Touchpanel

Monday, December 16, 2013 7:04 AM

Contacts

Sources

800.633.9876

Name +-

MenuDeleteKey

Andrew

Beth

2

1

ABC3DEF

Charlie

Video Window

6

MNO5JKL4GHI

David

7

9

WXYZ8TUV

PQRS

Ervin

0

Frank

End

Call

Greg

Call

Full

Privacy

Screen

Harold

Kevin

Near

Zoom

Enter

End

In

Mike

1 2 3

Far

Zoom

Andrew

End

Out

Camera DisplayPresets

(800) 633 - 9876

Ethernet/PoE

tron

l

p

Wireless

Extron
DTP CrossPoint
108 4K IPCP SA

Scaling Presentation
Matrix

Blu-ray Player

a Player

POWER

2

1

AUDIO

RGB, Y, R-Y, B-Y HDMI HDMI

INPUTS

ron

3

USW 333

12V

--A MAX

ransmitter

Ethernet

1

OVER DTPREMOTE

SIG LINK

RS-232 IR

Rx GTx RxTxG

DTP OUT

Power
Injector

Network

CONTACT

123G123+V

TCP/IP

HDMI

HDMI

RS-232TALLY

RESET

RxTx

RS-232

MODEL 80

Display

Ethernet

IR

IR

FLAT PANEL

DTP CROSSPOINT 108 4K

CONTROL

1 2 3 4 5A 6A

OUTPUTS

100-240V ~

--A MAX

123457 86

INPUTS

50-60 Hz

TxRx

R

S

RTSCTS

GTxRxGTxRx G

IR/SERIALeBUSRELAYS

SGG

HDMI

RS-232

CATx Cable
up to 230' (70 m)

1122C34C

Extron
DTP HDMI
4K 230 D Rx

Receiver

OUTPUTS
OUTPUTS

OVER DTP

OVER DTP

RS-232 IR

RS-232 IR

AUDIO

AUDIO

TxRxGTxRx
TxRxGTxRx

DIGITAL I/OCOM 3COM 2COM 1

AV LAN 2

AV LAN 3

1234G

PWR OUT = 6W

-S G+S+V

DMP EXPANSION

LAN

AV LAN 1

5B 6B 6

SIG LINK

XTP

DTP

OUT

HDBT

CATx Cable
up to 330' (100 m)

LINK

EXP

RS-232 IR

TxRx Tx RxG

RS-232 IR

TxRx Tx Rx

RS-232

CATx Cable
up to 330' (100 m)

LR

LR

1

3

2

LR4LR

AUDIO INPUTS

OVER TP

SIG LINK

G

OUT

RS-232 IR

TxRx Tx RxG

SIG LINK

XTP

RS-232 IR

DTP

TxRx Tx RxG

IN

Microphones

SIG LINK

POWER
12V

0.7A MAX

DTP IN

LR

5

6

LR

S/PDIF

OUT

XTP

DTP

HDBT

OVER TP

Projector

OVER DTP

IR

RS-232

TxRx Tx RxG

+48V

1

1

MIC/LINE

2

2

3

4

SIG LINK

XTP

HDBT

DTP

OUT

SIG LINK

DTP

IN

HDMI

Extron
DTP HDMI

DTP HDMI 330 Rx

4K 330 Rx

OUTPUTS

AUDIO

LR

Receiver

4

8/

1

LR

LR

3

3

1

R

L

2LR4

4

LR

AMP OUTPUT

AUDIO OUTPUTS

RS-232 IR

78

TxRx Tx RxG

RS-232 IR

TxRx Tx Rx

XTP

XTP

DTP

CLASS 2 WIRING

RESET

OVER TP

SIG LINK

XTP

HDBT

DTP

G

TxRx G

OUT

REMOTE

RS-232 IR

TxRx Tx RxG

SIG LINK

SIG LINK

OVER TP

RS-232 IR

TxRx Tx RxG

IN

IN

Extron
SM 26

Surface Mount

0

Relay

XTP

DTP

INPUTS

Figure 1. Typical DTP CrossPoint Application

The switchers are available in four matrix sizes (the number
of inputs and outputs) and three equipment congurations
(differentiated by their audio and control capabilities) for a total of
12 models:

Matrix sizes —

• DTP CrossPoint 108 4K — 10x8 DTP matrix switcher

• DTP CrossPoint 86 4K — 8x6 DTP matrix switcher

• DTP CrossPoint 84 4K — 8x4 DTP matrix switcher

• DTP CrossPoint 82 4K — 8x2 DTP matrix switcher

2 DTP CrossPoint 4K Series • Introduction

Equipment configurations —

DTP Cr

•

amplifier and a built-in Extron IPCP Pro control processor

•

DTP Cr

amplifier and a built-in Extron IPCP Pro control processor

• DTP CrossPoint 4K — Unamplified audio outputs only,

no IPCP Pro control processor

Depending on the matrix size, two or four video outputs are
scalable.

The switchers provide four mono microphone (mic)/line level inputs
that can be mixed with or across one or all audio outputs.

The IPCP models also feature the built-in Extron IPCP Pro control
processor, which has three local area network (AV LAN) Ethernet
ports, RS-232 and IR-based control, relays, and digital I/O controls
that can control and monitor a variety of external devices, such as
projectors and lights. The non-IPCP model has one Ethernet port.

The matrix switcher can be remotely controlled via an AV LAN port
(IPCP models) or LAN port (non-IPCP models), a serial port, or a
USB port connection using either the Extron Product Conguration
Software, DSP Congurator software, or the Simple Instruction Set
(SIS).

ossPoint 4K IPCP SA — Includes a stereo audio

ossPoint 4K IPCP MA — Includes a 70 V mono audio

DTP Input and Output Signals

The DTP inputs and outputs are proprietary signals that are created
within any of the Extron DTP Extenders systems and transmitted
over a single shielded twisted pair (STP) or unshielded twisted pair
(TP) cable. STP cable is strongly preferred and recommended.

The DTP CrossPoint accepts DTP inputs from transmitting devices
such as the DTP T USW 333. Depending on the connected
transmitting model, it generates the DTP signal from a variety of
video and audio inputs, including HDMI, DVI, analog VGA, and
embedded and analog audio. The DTP signal can also include
bidirectional RS-232 and IR control signals from the connected
transmitting and receiving devices or inserted locally, on the DTP
CrossPoint switcher.

Depending on the technology of the transmitting or receiving
device, DTP 330 or DTP 230, the TP inputs and outputs can travel
up to 330 feet (100 meters) or 230 feet (70 meters) without a loss
of signal integrity.

3DTP CrossPoint 4K Series • Introduction

Installation

ABC BB BCCC

D

EEEE

FF

F

F

This section describes installation of the DTP CrossPoint 4K Series
including connections and features. Topics that are covered
include:

• Rear Panel

•

ont Panel

Fr

Rear Panel

ATTENTION:

• Remove system power before making all connections.

Débranchez l’alimentation du système avant de fair

•

n’importe quelle connexion.

NOTES:

•

The
(see gure 2, 4, 6, and 8) but with fewer connectors.

• The DTP CrossPoint 82 is similar to the DTP CrossPoint 84,

(see gure 3, 5, 7, and 9) but with fewer connectors.

e

DTP CrossPoint 86 is similar to the DTP CrossPoint 108,

DTP CROSSPOINT 108 4K

100-240V ~

--A MAX

50-60 Hz

TxRx

RTSCTS

GTxRxG Tx Rx G

IR/SERIALeBUSRELAYS

1122C34C

R

CONTROL

SSGG

1 2 3 4 5A 6A

OUTPUTS

123457 86

INPUTS

Figure 2. Video Input and Output Connectors, 10x8 Matrix

HDMI inputs (see page5)

A

4 DTP CrossPoint 4K Series • Installation

TP (XTP/DTP) switches (see page5)

B

TP inputs (see page5)

C

HDMI outputs (see page 6)

D

TP (XTP/HDBT/DTP) switches (see page 6)

E

TP outputs (see page 6)

F

Video Inputs and Outputs

DIGITAL I/OCOM 3COM 2COM 1

1234G

PWR OUT = 6W

AV LAN 3

AV LAN 2

-S G+S+V

AV LAN 1

LAN

HDBT

LR

LINK

LR4L R

AUDIO INPUTS

DMP EXPANSION

EXP

RS-232 IR

5B 6B 6

Tx Rx Tx RxG

SIG LINK

OVER TP

XTP

RS-232 IR

DTP

TxRx TxRx

G

OUT

SIG LINK

XTP

DTP

IN

1

2

+48V

L R

LR

3

5

6

LR

S/PDIF

SIG LINK

OUT

XTP

HDBT

DTP

OUT

HDBT

RS-232 IR

TxRx TxRxG

OVER TP

RS-232 IR

TxRx TxRxG

LR

1

3

1

1

MIC/LINE

2

2LR4

2

4

3

4

AUDIO OUTPUTS

RS-232 IR

78

Tx Rx Tx RxG

SIG LINK

OVER TP

XTP

RS-232 IR

DTP

TxRx TxRx

G

OUT

9

SIG LINK

SIG LINK

XTP

XTP

DTP

DTP

IN

IN

LR

LR

SIG LINK

OUT

70V

1

3

AMP OUTPUT

CLASS 2 WIRING

REMOTE

RESET

XTP

HDBT

DTP

TxRx G

LAN

RS-232 IR

10

TxRx TxRxG

SIG LINK

OVER TP

XTP

RS-232 IR

TxRx TxRxG

INPUTS

DTP

IN

A B CC B

XTP

DTP

SIG LINK

EE

12

OUTPUTS

DTP CROSSPOINT 84 4K

100-240V ~ -- A MAX

1 23456

INPUTS

50-60 Hz

D

3A 4A

FF

3B

SIG LINK

XTP

DTP

OUT

HDBT

RS-232 IR

TxRx Tx RxG

RS-232 IR

TxRx Tx Rx

REMOTE

TxRx G

SIG LINK

8

IN

CONTROL

XTP

DMP EXPANSION

DTP

COM 1 COM 3COM 2 DIGITA L I/O

TxRx

RTSCTS

G

IR/SERIAL RELAYS DIGITAL I/O

12

R

SGSG

LR

LR4LR

AUDIO INPUTS

EXP

4B 4

SIG LINK

S/PDIF

OVER TP

OUT

XTP

RESET

DTP

OUT

G

HDBT

RS-232 IR

7

TxRx Tx RxG

SIG LINK

OVER TP

XTP

RS-232 IR

DTP

IN

TxRx Tx RxG

TxRx G TxRx G1234G

12

34C+V

C

PWR OUT = 6W

LR

1

3

2

+V D-S+S

LR

5

6

LR

AV LAN 2

+48V

1

2

3

4

LAN AV LAN 1

100V

AV LAN 3

1

AMP OUTPUT

CLASS 2 WIRING

R

LLR

3

1

MIC/LINE

2

3

1

2LR4

LR

4

AUDIO OUTPUTS

Figure 3. Video Input and Output Connectors, 8x4 Matrix

HDMI inputs 1 through 6 (see figure 2 on page 4 and

A

figure 3) — Plug HDMI digital video sources (or DVI
with appropriate adapters) into these HDMI ports. See

HDMI connectors on page 11 to secure the connector to the

enclosure with a LockIt HDMI Cable Lacing Bracket.

TP (XTP/DTP) switches (see figure 2 and figure 3) —

B

ATTENTION:

• Position this switch BEFORE connecting the

appropriate device to the TP connector. Failure to
comply can damage the endpoint.

• Positionnez le sélecteur AVANT de connecter

l’appareil approprié au connecteur TP. Ne pas
respecter cette procédure pourrait endommager le
point de connexion.

The following table identies the inputs with TP switches by
matrix size.

Matrix Inputs Matrix Inputs

10x8 7 through 10 All others 7 and 8

XTP position — Select if the transmitting device is an
Extron XTP matrix switcher. The input consists of HDMI with
embedded audio plus RS-232 and IR.

DTP position — Select if the transmitting device is an Extron
DTP device. The input consists of HDMI with embedded audio,
analog audio, and RS-232 and IR. The switcher can provide
remote power to the transmitter.

TP inputs (see figure 2 and figure 3)— Plug

C

compatible Extron DTP or XTP signals into these
RJ-45 ports using TP cables. See TP connectors on
page 12 to wire the connectors.

ATTENTION:

• Do not connect this port to a computer data or

telecommunications network.

• Ne connectez pas ces port à des données informatiques

ou à un réseau de télécommunications.

IN

5DTP CrossPoint 4K Series • Installation

HDMI outputs (see figure 2 on page 4 and figure 3

XTP

DTP

HDBT

SIG LINK

D

on page 5) — Plug HDMI video displays (or DVI with
appropriate adapters) into these ports. See HDMI

connectors to secure the connectors to the enclosure with a

LockIt HDMI Cable Lacing Bracket.

The following table identies the HDMI outputs by matrix size.

Matrix Outputs Matrix Outputs

10x8 1, 2, 3, 4, 5A, 6A 8x6 1, 2, 3A, 4A

8x4 1, 2, 3A, 4A 8x2 1A, 2A

NOTE: The signal output on the nA HDMI output (such as

5A) is duplicated on TP output nB (such as 5B).

TP (XTP/HDBT/DTP) switches (see figure 2 and figure 3) —

E

ATTENTION:

• Position this switch

appropriate device to the TP connector. Failure
to comply can damage the endpoint.

•

Positionnez le sélecteur
l’appareil approprié au connecteur TP. Ne
pas respecter cette procédure pourrait
endommager le point de connexion.

The following table identies the outputs with TP switches by
matrix size.

Matrix Outputs Matrix Outputs

10x8 5B, 6B, 7, 8 8x6 3B, 4B, 5, 6

8x4 3B, 4B 8x2 1B, 2B

BEFORE connecting the

AVANT de connecter

XTP position — Select if the receiving device is an Extron

XTP matrix switcher. The TP output consists of HDMI with
embedded audio plus RS-232 and IR.

HDBT position — Select if the receiving device is a
HDBaseT-enabled device. The TP output consists of HDMI with
embedded audio plus RS-232 and IR.

DTP position — Select if the receiving device is an Extron DTP
device. The TP output consists of HDMI with embedded audio,
analog audio, RS-232 and IR, and remote power.

TP outputs (see figure 2 and figure 3) — Plug

F

compatible Extron DTP receivers, XTP matrix
switchers, or HDBaseT-enabled devices into these
RJ-45 ports using TP cables. See TP connectors on
page 12 to wire the connector.

NOTE: The signal output on the nB TP output (such as 5B)

is duplicated on HDMI output nA (such as 5A).

6 DTP CrossPoint 4K Series • Installation

OUT