DA SV EQ Series
A uD i o / v i D e o Di s t r i b u ti o n Am p l i f i e rs
sPeC if iCAtio ns
viD eo
Gain
Y .. . .. .. .. . .. .. . .. .. . .. .. . .. .. . .. .. . . -1 dB to +3 dB (x 0.9 to x 1.4), adjustable per every 2 outputs
C (chroma)
. .. .. . .. .. .. . .. .. . .. .. . .. 0 dB to +10 dB (x 1 to x 3), adjustable
Equalization . .. .. .. . .. .. . .. .. . .. .. 0 dB to +6 dB (x 1 to x 2) at 5 MHz, adjustable per every 2 outputs
Bandwidth .. .. . .. .. . .. .. . .. .. . .. .. 150 MHz (-3 dB)
Output cable
driving distance . .. . .. .. . .. .. .. . . Up to 1000 feet with Mini HR cable, up to 1500 feet with RG6 or RG59 cables
viD eo in Pu t AnD L oo P-t hr ouG h
Number / Signal type . .. .. . .. .. . 1 S-video, 1 S-video passive loop-through
Connectors . .. .. . .. .. . .. .. . .. .. .. . 1 female 4-pin mini DIN (input), 1 female 4-pin mini DIN (loop-through)
Nominal level . .. . .. .. . .. .. . .. .. . . 1 Vp-p for Y of S-video
0.3 Vp-p for C of S-video
Minimum / Maximum levels .. . Y: 0.4 V to 2.0 Vp-p with no offset at unity gain
Impedance .. .. . .. .. . .. .. . .. .. . .. .. 75 ohms or Hi-Z, selectable
Return loss . .. .. . .. .. . .. .. . .. .. . .. -30 dB @ 5 MHz
DC offset (max. allowable) .. .. .. . 4.0 V, AC coupled
viD eo ou tP ut
Number / Signal type . .. .. . .. .. . 6 S-video
Connectors . .. .. . .. .. . .. .. . .. .. .. . 6 female 4-pin mini DIN
Nominal level . .. . .. .. . .. .. . .. .. . . 1 Vp-p for Y of S-video
0.3 Vp-p for C of S-video
Minimum / Maximum levels .. . 0.4 V to 2.0 Vp-p
Impedance .. .. . .. .. . .. .. . .. .. . .. .. 75 ohms
Return loss . .. .. . .. .. . .. .. . .. .. . .. -30 dB @ 5 MHz
syn C
Standards .. . .. .. . .. .. . .. .. .. . .. .. . NTSC 3.58, NTSC 4.43, PAL, SECAM
AuD io (D A 6 SVA EQ AN D D A 6 SVA EQ RC A)
Gain .. .. . .. .. .. . .. .. . .. .. . .. .. . .. .. . Unity when internal jumpers are set to match output wiring.
See table below for other conditions.
Output Wiring
Internal Jumpers
Balanced Unbalanced
Balanced 0 dB +6 dB
Unbalanced -6 dB 0 dB
Frequency response .. .. . .. .. . .. 20 Hz to 20 kHz, ±0.05 dB (with voltage reference @ 1 kHz)
THD + Noise .. . .. .. . .. .. . .. .. . .. .. 0.03% @ 1 kHz at nominal level
S/N (at any output). .. .. . .. .. .. . .. . >90 dB, unbalanced, at maximum output (unweighted)
Stereo channel separation . .. . >80 dB @ 1 kHz, >60 dB @ 20 kHz
CMRR .. .. .. . .. .. . .. .. . .. .. . .. .. . .. . >75 dB @ 20 Hz to 20 kHz
Output cable
driving distance . .. . .. .. . .. .. .. . . Up to 1000 feet with STP 22 cable
AuD io in Pu t (DA 6S VA E Q A ND DA 6S VA E Q R CA)
Number / Signal type
DA 6SVA RCA EQ
. .. .. . .. .. . .. .. . . 1 stereo, unbalanced
DA 6SVA EQ
.. .. . .. .. . .. .. . .. .. . .. . 1 stereo, balanced/unbalanced
Connectors
DA 6SVA RCA EQ
. .. .. . .. .. . .. .. . . 1 pair female RCA
DA 6SVA EQ
.. .. . .. .. . .. .. . .. .. . .. . (1) 3.5 mm captive screw connector, 5 pole
Impedance
DA 6SVA RCA EQ
. .. .. . .. .. . .. .. . . >18k ohms, unbalanced, DC coupled
DA 6SVA EQ
.. .. . .. .. . .. .. . .. .. . .. . >18k ohms unbalanced, >24k ohms balanced, DC coupled
Nominal level . .. . .. .. . .. .. . .. .. . . Compatible with +4 dBu (1.23 Vrms), 0 dBu (0.775 Vrms),
-10 dBV (316 mVrms), -20 dBV (100 mVrms)
Maximum level
DA 6SVA RCA EQ
. .. .. . .. .. . .. .. . . +18 dBu, (unbalanced) at 1%THD+N
DA 6SVA EQ
.. .. . .. .. . .. .. . .. .. . .. . +24 dBu, (balanced) at 1%THD+N
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
AuD io ou tP ut (D A 6 SVA EQ AN D D A 6 SVA EQ RC A)
Number / Signal type
DA 6SVA RCA EQ
. .. .. . .. .. . .. .. . . 6 stereo, unbalanced
DA 6SVA EQ
.. .. . .. .. . .. .. . .. .. . .. . 6 stereo, balanced/unbalanced
Connectors
DA 6SVA RCA EQ
. .. .. . .. .. . .. .. . . 6 pairs of female RCA jacks
DA 6SVA EQ
.. .. . .. .. . .. .. . .. .. . .. . (6) 3.5 mm captive screw connectors, 5 pole
Impedance
DA 6SVA RCA EQ
. .. .. . .. .. . .. .. . . 50 ohms unbalanced
DA 6SVA EQ
.. .. . .. .. . .. .. . .. .. . .. . 50 ohms unbalanced, 100 ohms balanced
Maximum level (Hi-Z)
DA 6SVA RCA EQ
. .. .. . .. .. . .. .. . . >+18 dBu, unbalanced at 1%THD+N
DA 6SVA EQ
.. .. . .. .. . .. .. . .. .. . .. . >+24 dBu, balanced at 1%THD+N
Maximum level (600 ohm)
DA 6SVA EQ
.. .. . .. .. . .. .. . .. .. . .. . >+15 dBm, balanced at 1%THD+N
Gen er AL
Power .. .. . .. .. . .. .. . .. .. .. . .. .. . .. . 100 VAC to 240 VAC, 50/60 Hz, 8 watts, internal, universal
Temperature / Humidity .. .. . .. . Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Rack mount . .. . .. .. . .. .. . .. .. . .. . Yes, with optional 1U rack shelf, part #60-190-01 or 60-604-01; or
#60-190-10 or 60-604-10; Also furniture mountable with an optional
Under-Desk Mounting Kit, #70-077-01, or Through-Desk Mounting Kit,
#70-077-02
Enclosure type .. .. .. . .. .. . .. .. . .. Metal
Enclosure dimensions . .. .. . .. .. 1.7" H x 8.7" W x 6.0" D (1U high, half rack wide)
4.3 cm H x 22.1 cm W x 15.2 cm D (Depth excludes connectors.)
Product weight . .. . .. .. . .. .. . .. .. 2 lbs (0.9 kg)
Shipping weight .. . .. .. . .. .. .. . .. 4 lbs (2 kg)
Vibration . .. .. . .. .. . .. .. . .. .. . .. .. . ISTA 1A in carton (International Safe Transit Association)
Listings .. . .. .. . .. .. . .. .. . .. .. . .. .. . UL, CUL
Compliances . .. .. . .. .. . .. .. . .. .. . CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF . .. .. . .. .. . .. .. . .. .. . .. .. . .. .. 30,000 hours
Warranty .. . .. .. . .. .. .. . .. .. . .. .. . . 3 years parts and labor
NOTE: All nominal levels are at ±10%. Specifications are subject to change without notice.
530