AC100 and AC+USB 200 Power Module Series
for the Cable Cubby Series/2 Installation Guide
The AC100 and AC+USB200 feature powered sockets for powering
and charging compatible mobile devices.
External
USB CHARGER
125V~ 12A MAX TOTAL
Top View
AC + USB 200
AC Power Cord
C
USB
POWER
12V
1.0 A MAX
Bottom View
AC + USB 200
If applicable, secur
and external power supply
cords with the included
cable retainers (2).
ATTENTION:
• Always use a power supply provided by or specied by Extron. Use of an unauthorized power supply
voids all regulatory compliance certication and may cause damage to the supply and the end
product.
• Always consult with a professional installer.
• Unless otherwise stated, the AC/DC adapters are not suitable for use in air handling spaces or in
wall cavities. The power supply is to be located within the same vicinity as the Extron AV processing
equipment in an ordinary location, Pollution Degree 2, secured to the equipment rack within the
dedicated closet, podium, or desk.
• Follow all applicable country and region electrical codes.
• In the US and Canada, the installation must always be in accordance with the applicable provisions
of National Electrical Code ANSI/NFPA 70, article 75 and the Canadian Electrical Code part1,
section 16. The power supply shall not be permanently xed to building structure or similar structure.
• Do not cut off the ground pin from the power cord plug.
Power Supply
(12 VDC, 1 A)
D
Slide the modules under
the Cable Cubby.
Extron Headquarters
+1.800.633.9876 (USA/Canada)
Extron Europe
+31.33.453.4040
© 2014 Extron Electronics All rights reserved. www.extron.com
125V~ 12A MAX TOTAL
AC 100A
Extron Asia
+65.6383.4400
Extron Japan
+81.3.3511.7655
WARNING: To ensure proper
electrical grounding, use the
provided #6-32 grounding
screws and star washers.
Secure the modules using
the provided mounting screw,
& star washer (4).
E
Extron China
+86.21.3760.1568
Extron Middle East
+971.4.299.1800
Extron Korea
+82.2.3444.1571
Extron India
+91.80.3055.3777
68-2531-01 B
02 14
AC100 and AC+USB 200 Power Module Series
for the Cable Cubby Series/2 Installation Guide
The AC100 and AC+USB200 feature powered sockets for powering
and charging compatible mobile devices.
External
USB CHARGER
125V~ 12A MAX TOTAL
Top View
AC + USB 200
AC Power Cord
C
USB
POWER
12V
1.0 A MAX
Bottom View
AC + USB 200
If applicable, secur
and external power supply
cords with the included
cable retainers (2).
ATTENTION:
• Always use a power supply provided by or specied by Extron. Use of an unauthorized power supply
voids all regulatory compliance certication and may cause damage to the supply and the end
product.
• Always consult with a professional installer.
• Unless otherwise stated, the AC/DC adapters are not suitable for use in air handling spaces or in
wall cavities. The power supply is to be located within the same vicinity as the Extron AV processing
equipment in an ordinary location, Pollution Degree 2, secured to the equipment rack within the
dedicated closet, podium, or desk.
• Follow all applicable country and region electrical codes.
• In the US and Canada, the installation must always be in accordance with the applicable provisions
of National Electrical Code ANSI/NFPA 70, article 75 and the Canadian Electrical Code part1,
section 16. The power supply shall not be permanently xed to building structure or similar structure.
• Do not cut off the ground pin from the power cord plug.
Power Supply
(12 VDC, 1 A)
D
Slide the modules under
the Cable Cubby.
Extron Headquarters
+1.800.633.9876 (USA/Canada)
Extron Europe
+31.33.453.4040
© 2014 Extron Electronics All rights reserved. www.extron.com
125V~ 12A MAX TOTAL
AC 100A
Extron Asia
+65.6383.4400
Extron Japan
+81.3.3511.7655
WARNING: To ensure proper
electrical grounding, use the
provided #6-32 grounding
screws and star washers.
Secure the modules using
the provided mounting screw,
& star washer (4).
E
Extron China
+86.21.3760.1568
Extron Middle East
+971.4.299.1800
Extron Korea
+82.2.3444.1571
Extron India
+91.80.3055.3777
68-2531-01 B
02 14