Extron electronic XTP T HDMI, XTP R HDMI User Manual
XTP T HDMI
XTP R HDMI
XTP HDMI Transmitter and Receiver
User Guide
XTP Extenders
68-1723-01 Rev. A
07 13
Safety Instructions • English
WARNING: This symbol, , when used on the product, is intended
to alert the user of the presence of uninsulated dangerous voltage
within the product’s enclosure that may present a risk of electric
shock.
ATTENTION: This symbol, , when used on the product, is intended
to alert the user of important operating and maintenance (servicing)
instructions in the literature provided with the equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron
website, www.extron.com.
Chinese Simplified（简体中文）
警告： 产品上的这个标志意在警告用户该产品机壳内有暴露的危险
电 压 ，有 触 电 危 险 。
注意： 产品上的这个标志意在提示用户设备随附的用户手册中有
重要的操作和维护(维修）说明。
关于我们产品的安全指南、遵循的规范、
使用的特性等相关内容，敬请访问
安全规范指南，产品编号
68-290-01。
EMI/EMF 的兼容性、无障碍
Extron 网站 www.extron.cn，参见 Extron
Instructions de sécurité • Français
AVERTISSEMENT: Ce pictogramme, , lorsqu’il est utilisé sur
le produit, signale à l’utilisateur la présence à l’intérieur du boîtier
du produit d’une tension électrique dangereuse susceptible de
provoquer un choc électrique.
ATTENTION: Ce pictogramme, , lorsqu’il est utilisé sur le produit,
signale à l’utilisateur des instructions d’utilisation ou de maintenance
importantes qui se trouvent dans la documentation fournie avec le
matériel.
Pour en savoir plus sur les règles de sécurité, la conformité à la
réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets
connexes, lisez les informations de sécurité et de conformité Extron, réf.
68-290-01, sur le site Extron, www.extron.fr.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer
darauf aufmerksam machen, dass im Inneren des Gehäuses dieses
Produktes gefährliche Spannungen herrschen, die nicht isoliert sind
und die einen elektrischen Schlag verursachen können.
VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in
der im Lieferumfang enthaltenen Dokumentation besonders wichtige
Hinweise zur Bedienung und Wartung (Instandhaltung) geben.
Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie
in den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer
68-290-01) auf der Extron-Website, www.extron.de.
Instrucciones de seguridad • Español
ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de voltaje peligroso sin aislar dentro
del producto, lo que puede representar un riesgo de descarga
eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa
al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con
el equipo.
Chinese Traditional（繁體中文）
警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著
可能會導致觸電之風險的未絕緣危險電壓。
注意 若產品上使用此符號，是為了提醒使用者。
有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳細
資訊，請瀏覽 Extron 網站：www.extron.cn，然後參閱《Extron 安全性與法規遵
守手冊》，準則編號 68-290-01
。
Japanese
警告: この記 号 が製品上に表示されている場合は、筐体内に絶縁されて
いない高電圧が流れ、感電の危険があることを示しています。
注意:この 記号 が製品上に表示されている場合は、本機の取扱説明書に
記載されている重要な操作と保 守( 整備 )の指 示についてユーザーの
注意を喚起するものです。
安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に
つ い て は 、エ ク スト ロ ン の ウ ェブ サ イトwww.extron.jpより
『Extron Safety and Regulatory Compliance Guide 』 (P/N 68-290-01) をご覧ください 。
Korean
경고: 이 기호 , 가 제품에 사용될 경우, 제품의 인클로저 내에 있는
접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을
경고합니다.
주의: 이 기호 , 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와
있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.
안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련
항목에 대한 자세한 내용은 Extron 웹 사이트(www.extron.co.kr)의
Extron 안전 및 규제 준수 안내서, 68-290-01 조항을 참조하십시오.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y
temas relacionados, consulte la Guía de cumplimiento de normativas
y seguridad de Extron, referencia 68-290-01, en el sitio Web de Extron,
www.extron.es.
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause interference; the user must correct the interference at his own expense.
ATTENTION: The Twisted Pair Extension technology works with unshielded twisted
pair (UTP) or shielded twisted pair (STP) cables; but, to ensure FCC Class A and CE
compliance, STP cables and STP connectors are required.
For more information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the “Extron Safety and Regulatory
Compliance Guide” on the Extron website.
Copyright
© 2013 Extron Electronics. All rights reserved.
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks
(®)
, registered service marks
(SM)
, and trademarks
(TM)
are the property of
RGBSystems, Inc. or Extron Electronics:
Registered Trademarks
AVTrac, Cable Cubby, CrossPoint, eBUS, EDID Manager, EDID Minder, Extron, Flat Field,GlobalViewer, Hideaway, Inline, IP Intercom,
IP Link, Key Minder, LockIt, MediaLink, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, SoundField, SpeedMount, SpeedSwitch,
System Integrator, TeamWork, TouchLink, V-Lock, VersaTools, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP, XTP Systems
(SM)
Registered Service Mark
AAP, AFL (Accu-Rate Frame Lock), ADSP (Advanced Digital Sync Processing), AIS (Advanced Instruction Set), Auto-Image, CDRS (Class D
Ripple Suppression), DDSP (Digital Display Sync Processing), DMI (Dynamic Motion Interpolation), Driver Configurator, DSP Configurator, DSVP
(Digital Sync Validation Processing), FastBite, FOXBOX, IP Intercom HelpDesk, MAAP, MicroDigital, ProDSP, QS-FPC (QuickSwitch Front Panel
Controller), Scope-Trigger, SIS, Simple Instruction Set, Skew-Free, SpeedNav, Triple-Action Switching, XTRA, ZipCaddy, ZipClip
: S3 Service Support Solutions
Trademarks
(®)
(™)
Conventions Used in this Guide
Notifications
The following notifications are used in this guide:
WARNING: A warning indicates a situation that has the potential to result in death or
severe injury.
ATTENTION: Attention indicates a situation that may damage or destroy the product or
associated equipment.
NOTE: A note draws attention to important information.
TIP: A tip provides a suggestion to make working with the application easier.
Software Commands
Commands are written in the fonts shown here:
^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]
E X! *X1&* X2)* X2#* X2! CE}
NOTE: For commands and examples of computer or device responses mentioned
in this guide, the character “0” is used for the number zero and “O” represents the
capital letter “o.”
Computer responses and directory paths that do not have variables are written in the font
shown here:
Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron
Variables are written in slanted form as shown here:
ping xxx.xxx.xxx.xxx —t
SOH R Data STX Command ETB ETX
Selectable items, such as menu names, menu options, buttons, tabs, and field names are
written in the font shown here:
From the File menu, select New.
Click the OK button.
Specifications Availability
Product specification are available on the Extron website, www.extron.com.
Contents
Introduction .................................................... 1
About This Guide ................................................ 1
About the XTP HDMI Transmitter and
Receiver ............................................................ 1
Key Features ...................................................... 2
Installation and Operation .............................. 4
Cabling ............................................................... 4
XTP T HDMI Rear Panel Connectors ............... 4
XTP R HDMI Rear Panel Connectors .............. 6
Front Panel Configuration Port ........................ 7
Making Connections ........................................... 8
HDMI LockIt ................................................... 8
TP Cable Termination and
Recommendations ........................................ 9
RS-232 and IR Communication .................... 10
Power Connection ........................................ 11
Operation ......................................................... 13
XTP T HDMI Front Panel Indicators ............... 13
XTP R HDMI Front Panel Indicators .............. 13
HDMI Audio Switch ...................................... 14
EDID ............................................................. 14
Audio Output Overview ................................. 15
Reset Modes ................................................ 15
SIS Configuration and Control ..................... 16
Host Device Connection ................................... 16
SIS Programming Guide ................................... 16
Host-to-Device and Device-to-Host
Communication ........................................... 16
Error Responses ........................................... 17
Using the Command and Response Table
for SIS Commands ...................................... 17
Command and Response Tables for
Transmitter SIS Commands ............................. 19
Audio Configuration ...................................... 19
EDID ............................................................. 20
Advanced Configuration ............................... 20
Command and Response Tables for
Receiver SIS Commands ................................. 21
Audio Configuration ...................................... 21
Advanced Configuration ............................... 21
XTP System Configuration Software ........... 23
Installing the XTP System Configuration
Software .......................................................... 23
Using the XTP System Configuration
Software .......................................................... 24
Connection ................................................... 24
Transmitter Configuration .............................. 25
Receiver Configuration .................................. 28
Reference Information ................................. 29
Mounting .......................................................... 29
Tabletop Mounting ........................................ 29
Mounting Kits ............................................... 29
Updating Firmware with Firmware Loader ......... 30
Downloading Extron Firmware Loader .......... 30
Installing Firmware Loader ............................ 30
Downloading Firmware ................................. 31
Installing Firmware with Firmware Loader ...... 32
XTP T HDMI Transmitter and XTP R HDMI Receiver • Contents
iv
XTP T HDMI Transmitter and XTP R HDMI Receiver • Contents
v
Introduction
This section contains general information about this guide and the Extron XTP T HDMI
transmitter and XTP R HDMI receiver. Topics in this section include:
• About This Guide
• About the XTP HDMI Transmitter and Receiver
• Key Features
About This Guide
This guide contains installation, operation, control, and reference information for the
XTP T HDMI transmitter and the XTP R HDMI receiver.
In this guide, the terms “transmitter,” “XTP T HDMI,” and “XTP HDMI transmitter” are used
interchangeably to refer to the XTP T HDMI transmitter. The terms “receiver,” “XTP R HDMI,”
and “XTP HDMI receiver” are used interchangeably to refer to the XTP R HDMI receiver.
About the XTP HDMI Transmitter and Receiver
Both the XTP T HDMI transmitter and XTP R HDMI receiver send or receive video, audio,
bidirectional RS-232 and IR, and Ethernet over a single twisted pair cable. They are
HDCP-compliant and support 1080p/60 Deep Color and 1920x1200 signals, and
embedded HD lossless audio formats. They work with Extron XTP devices in matrix or
point-to-point applications for signal distribution and long-distance transmission (up to 330
feet) between remote endpoints, using shielded or unshielded CATx cable.
They can be powered locally or remotely through an Extron XTP Power Injector or XTP
matrix switcher.
Both devices can be controlled through Extron Simple Instruction Set (SIS) or the XTP
Configuration Software (see SIS Configuration and Control on page 16 or XTP System
Configuration Software on page 23).
1XTP T HDMI Transmitter and XTP R HDMI Receiver • Introduction
The following diagram shows some ways the XTP T HDMI and the XTP R HDMI can be
integrated in an XTP matrix application.
PC
Laptop
STANDBY/ON
Blu-ray
Ethernet
HDMI
POWER
12V
--A MAX
HDMI
Extron
XTP T HDMI
Long Distance XTP
Transmitter for HDMI
Ethernet
HDMI
POWER
12V
--A MAX
HDMI
Extron
XTP T HDMI
Long Distance XTP
Transmitter for HDMI
Ethernet
PQLS HDMI OPEN/CLOSE FL OFF
USB
HDMI
POWER
12V
--A MAX
HDMI
Extron
XTP T HDMI
Long Distance XTP
Transmitter for HDMI
Ethernet
AV Control
Network
INPUTS
HDMI AUDIO
ON
OFF
LOOP-THRU
SIG LINK
OVER XTP
AUDIO
LR
RS-232 IR
RESET
−+−+
ACT LINK
XTP OUT
XTP T HDMI
RxTx
RxTx
LAN
Ethernet
Extron
IPCP 505
IP Link Control
Processor
100-240V 50-60Hz
COM1
COM2
COM3
COM7
2
1
SGSG
RTS CTS
TXRX
TXRX
TXRX
TXRX
+-+-
SWITCHED 12VDC
IR/SERIAL
40W MAX TOTAL
COM4
COM5
COM6
COM8
3 4
5
6 7
SGSG
RTS CTS
TXRX
TXRX
TXRX
TXRX
+-+-
5A MAX
RS-232 IR
3
SGSG
SGSG
4 1 21 2 3 4
8 5 6 7 8
House Network Switch
eBUS
+V
D-S+S
LAN
PWR OUT = 12W
RELAY
FLEX I/O
1234
Ethernet
CAT 5-type Cable
XTP CP 4i
XTP CP 4i
IN
IN
IN
IN
XTP CP 4i HDMI
XTP CP 4i HDMI
XTP CP 4i DVI Pro
REMOTE
RS 232/RS422
AUDIO
AUDIO
AUDIO
ACT
LRLRLRLR
LRLRLRLR
LRLRLRLR
LAN
LINK
INPUTS
HDMI AUDIO
ON
OFF
LOOP-THRU
INPUTS
HDMI AUDIO
ON
OFF
LOOP-THRU
SIG LINK
OVER XTP
AUDIO
LR
RS-232 IR
−+−+
XTP OUT
XTP T HDMI
RxTx
RxTx
IR
SIG LINK
OVER XTP
AUDIO
LR
RS-232 IR
−+−+
XTP OUT
XTP T HDMI
RxTx
RxTx
RESET
RESET
ACT LINK
LAN
100-240V
--A MAX
50-60Hz
DISCONNECT POWER
CORD BEFORE
SERVICING
IN
IN
IN
RESET
ACT LINK
LAN
IN
IN
IN
IN
XTP CP 4i VGA
XTP CP 4i VGA
XTP CP 4i DVI Pro
TxRx Tx Rx
RS-232 IR
TxRx Tx Rx
RS-232 IR
AUDIO
AUDIO
AUDIO
IR/RS-232 OVER XTP
IR/RS-232 OVER XTP
TxRx Tx Rx
RS-232 IR
LRLRLRLR
LRLRLRLR
LRLRLRLR
TxRx Tx Rx
RS-232 IR
LAN
ACT LINK
XTP
SIG LINK
SIG LINK
PWR
LAN
ACT LINK
XTP
SIG LINK
SIG LINK
PWR
LAN
ACT LINK
XTP
SIG LINK
SIG LINK
PWR
LAN
ACT LINK
XTP
SIG LINK
SIG LINK
PWR
IN
IN
IN
IN
IN
OUT
OUT
OUT
XTP CP 4o HDMI
XTP CP 4o HDMI
XTP CP 4o DVI Pro
TxRx Tx Rx
RS-232 IR
TxRx Tx Rx
RS-232 IR
AUDIO
AUDIO
AUDIO
TxRx Tx Rx
RS-232 IR
RS-232 IR
PWR
PWR
PWR
PWR
LRLRLRLR
LRLRLRLR
LRLRLRLR
TxRx Tx Rx
LAN
ACT LINK
O
I
U
XTP
N
T
P
P
U
U
T
T
S
S
LAN
ACT LINK
XTP
LAN
ACT LINK
XTP
LAN
ACT LINK
XTP
OUT
OUT
OUT
Extron
XTP CrossPoint 3200
Modular Digital
Matrix Switcher
Extron
TLP 1000TV
10" Ta bletop TouchLink
Touchpanel
Ethernet
XTP CP 4o
XTP CP 4o
OUT
OUT
OUT
OUT
XTP CP 4o SA
XTP CP 4o DVI Pro
TxRx Tx Rx
TxRx Tx Rx
RS-232 IR
RS-232 IR
TxRx Tx Rx
TxRx Tx Rx
RS-232 IR
RS-232 IR
AUDIO
AUDIO
IR/RS-232 OVER XTP
IR/RS-232 OVER XTP
TxRx Tx Rx
TxRx Tx Rx
RS-232 IR
RS-232 IR
LRLRLRLR
LRLRLRLR
TxRx Tx Rx
TxRx Tx Rx
RS-232 IR
RS-232 IR
LAN
LAN
ACT LINK
ACT LINK
XTP
XTP
SIG LINK
SIG LINK
PWR
PWR
LAN
LAN
ACT LINK
ACT LINK
XTP
XTP
SIG LINK
SIG LINK
PWR
PWR
LAN
LAN
ACT LINK
ACT LINK
XTP
XTP
SIG LINK
SIG LINK
PWR
PWR
LAN
LAN
ACT LINK
ACT LINK
XTP
XTP
SIG LINK
SIG LINK
PWR
PWR
OUT
OUT
OUT
OUT
100-240V 1.3A, 50-60Hz
Extron
XPA 1002
Stereo Power Amplier
Ethernet
SIG LINK
POWER
12V
--A MAX
ACT LINK
XTP IN
LAN
Extron
XTP R HDMI
Long Distance XTP
Receiver for HDMI
Ethernet
SIG LINK
POWER
12V
--A MAX
ACT LINK
XTP IN
LAN
Extron
XTP R HDMI
Long Distance XTP
Receiver for HDMI
Stereo Audio
17TT
AUDIO/VIDEO
C US
APPARATUS
LISTED
LEVEL
12
1
2
LIMITER/
PROTECT
SIGNAL
0 0
OVER XTP
RS-232 IR
RxTx
RxTx
RS-232
OVER XTP
RS-232 IR
RxTx
RxTx
INPUTS
10V 50 mA
2
1
IR
REMOTE
VOL/MUTE
HDMI AUDIO
HDMI AUDIO
CLASS 2 WIRING
ON
OFF
HDMI
ON
OFF
HDMI
OUTPUT
1
STANDBY
HDMI
XTP R HDMI
OUTPUTS
S/PDIF
AUDIO
RELAYS
1
RL
-+-+
HDMI
XTP R HDMI
OUTPUTS
AUDIO
S/PDIF
RELAYS
1
RL
-+-+
XPA 1002
2
Extron
SI 28
Surface Mount
Speakers
2
RESET
2
RESET
Flat Panel
Display
Flat Panel
Display
Key Features
Figure 1. Typical XTP HDMI Transmitter and Receiver Matrix Application
Reliable cable infrastructure — Transmits or receives video, audio, bidirectional
RS-232 and IR, and Ethernet up to 330 feet (100 m) over a CATx cable, providing
high reliability and maximum performance on an economical and easily installed cable
infrastructure.
1080p/60 Deep Color and 1920x1200 signals — Supports digital signal transmission up
to 330 feet over a single twisted pair cable, maintaining superior image quality at the highest
resolutions.
CAT 5e, 6, 6a, and 7 compatible — Optimized for use with common unshielded and
shielded twisted pair cable types. XTP systems fully support a maximum transmission
distance of 330 ft (100 m) for all compatible resolutions. Shielded twisted pair cable provides
added protection from outside interference.
Bidirectional RS-232 and IR insertion — Allows a remote display to be controlled without
the need for additional cabling through bidirectional RS-232 and IR control signals inserted
into the XTP output.
HDMI specification features — Include data rates up to 6.75 Gbps, Deep Color up to
12-bit, 3D, and HD lossless audio formats.
HDCP compliance — Ensures display of content-protected media and interoperability with
other HDCP-compliant devices.
XTP T HDMI Transmitter and XTP R HDMI Receiver • Introduction 2
EDID Minder — Automatically manages EDID communication between connected devices.
It ensures that all sources power up properly and reliably outputs content for display.
Key Minder — Authenticates and maintains continuous HDCP encryption between input
and output devices to ensure quick and reliable switching in professional AV environments,
while enabling simultaneous distribution of a single source signal to one or more displays.
Ethernet extension — Centralized 10/100 Ethernet communication can be implemented
via an Ethernet pass-through port to reduce the amount of independent network drops
required within a system.
Remote power capability — To simplify integration, XTP transmitters and receivers can be
powered by the XTP CrossPoint matrix switcher or XTP Power Injectors.
Multiple embedded audio formats — Compatible with a broad range of
multi-channel audio signals, providing reliable operation with HDMI sources.
Transmitter HDMI loop-through with selectable audio control — Features an active
HDMI output with support for embedded audio for connection to a local monitor.
Transmitter selectable analog stereo audio input embedding — Supports balanced
or unbalanced audio for extended transmission by embedding stereo audio into the signal
stream. This feature enables direct connection of separate stereo audio signals from a
laptop, Blu-ray Disc player, or other device.
Receiver HDMI audio de-embedding with analog stereo and digital S/PDIF audio
outputs — Digital HDMI audio is made available as a balanced or unbalanced analog
stereo signal on captive screw connectors or a S/PDIF connector.
XTP T HDMI Transmitter and XTP R HDMI Receiver • Introduction 3
Installation and
abcd efg
Slee
Operation
This section contains the installation procedures for and operation of the XTP T HDMI and
the XTP R HDMI. Topics in this section include:
• Cabling
• Making Connections
• Operation
XTP HDMI transmitters and receivers can be mounted in a rack or under a desk or placed
on a tabletop (see Mounting on page 29 for more mounting details).
Cabling
XTP T HDMI Rear Panel Connectors
POWER
12V
1.0 A MAX
HDMI
INPUTS
LOOP-THRU
AUDIO
ON
OFF
AUDIO
LR
−+−+
OVER XTP
RS-232 IR
Rx GTx
SIG LINK
RxTx
XTP OUT
LAN
Figure 2. XTP T HDMI Rear Panel Connectors
NOTES:
• For HDMI cables, the maximum cable length is 15 feet.
• Use Extron LockIt lacing brackets to secure HDMI connectors to the device (see
HDMI LockIt on page 8).
• Video input from a DisplayPort source must be a dual mode DisplayPort source.
HDMI input connector — Connect a digital video source to the female HDMI
a
connector. It can accept HDMI, DVI (with an appropriate adaptor), or DisplayPort video
signals.
HDMI Loop-thru connector — Connect a digital video display to the female HDMI
b
Loop-thru connector to locally display the input source (see HDMI Audio Switch on
page 14 to select local audio output options). Displays that are not HDCP compliant
display a green screen when HDCP encrypted content is sent to them.
Analog audio inputs — Connect a balanced or unbalanced analog audio source to
c
the 5-pole captive screw connector for stereo analog audio input.
Tip
Ring
ves
Tip
Ring
LR
Tip
Sleeve
Tip
Sleeve
LR
Do not tin the wires!
RESET
Balanced Audio Input
Unbalanced Audio Input
Figure 3. Audio Input Wiring
4XTP T HDMI Transmitter and XTP R HDMI Receiver • Installation
RS-232 Over XTP port — To pass bidirectional serial, Infrared, or other
d
control signals between XTP-compatible devices, connect a control device
to the 5-pole captive screw connector. The port includes only the 3 poles
labeled “RS-232.”
IR Over XTP port — To enable the ability to transmit and receive IR
signals (up to 40 kHz), connect a control device to the 5-pole captive screw
connector. This port includes only the 2 poles labeled “IR” and shares the
ground pole with the RS-232 port.
NOTE: RS-232 and IR data can be transmitted simultaneously (see
RS-232 and IR Communication on page 10 for wiring details).
XTP connector — Connect a twisted pair cable to the RJ-45 connector labeled
e
XTP Out and the XTP input port on another XTP device to pass all signals (see TP
Cable Termination and Recommendations on page 9). This cable carries the
following signals:
• Digital video
• Digital audio
• Bidirectional RS-232 and IR commands
• Remote power
• Ethernet communication
• System communication
The Link LED lights amber when XTP devices are connected and communication is
established.
The Signal LED lights green when the transmitter outputs video signal or test pattern.
IR
RS-232
Tx Rx G Tx Rx
IR
RS-232
Tx Rx G Tx Rx
ATTENTION:
• Do not connect this connector to a computer data or telecommunications
network.
• XTP remote power is intended for indoor use only. No part of the network that
uses XTP remote power should be routed outdoors (see Remote power on
page 12).
LAN connector — Connect a control device or device to be controlled to the
f
transmitter for 10/100 Ethernet communication through this pass-through port. LEDs
on the connector indicate link and activity status.
Power connector and LED — Connect the external 12 V, 1.0 A power supply into the
g
2-pole captive screw connector. The Power LED lights to indicate the device is receiving
power.
NOTE: XTP HDMI transmitters and receivers can also be powered remotely
(see Power Connection on page 11).
XTP T HDMI Transmitter and XTP R HDMI Receiver • Installation 5
XTP R HDMI Rear Panel Connectors
ab cefghd
POWER
12V
1.0 A MAX
SIG LINK
XTP IN
LAN
OVER XTP
RS-232 IR
Rx GTx
AUDIO
ON
OFF
RxTx
HDMI
AUDIO
-+-+
RL
OUTPUTS RELAYS
1
S/PDIF
2
RESET
Figure 4. XTP R HDMI Connectors
XTP connector — Connect a twisted pair cable to the RJ-45 connector labeled
a
XTP In on the receiver and to an XTP output port on another XTP device to receive all signals
(see TP Cable Termination and Recommendations on page 9). This cable carries the
following signal:
• Digital video
• Digital audio
• Bidirectional RS-232 and IR commands
• Remote power
• Ethernet communication
• System communication
The Link LED lights amber when XTP devices are connected and communication is
established.
The Signal LED lights green when the receiver receives an active HDMI video signal or a test
pattern from the transmitter.
ATTENTION:
• Do not connect this connector to a computer data or telecommunications network.
• XTP remote power is intended for indoor use only. No part of the network that uses
XTP remote power should be routed outdoors (see Remote power on page 12).
LAN connector — Connect a control device or device to be controlled to the transmitter
b
for 10/100 Ethernet communication through this pass-through port. LEDs on the connector
indicate link and activity status.
RS-232 Over XTP port — To pass bidirectional serial, Infrared, or other control
c
signals between XTP-compatible devices, connect a control device to the 5-pole
captive screw connector. The port includes only the 3 poles labeled “RS-232.”
IR Over XTP port — To enable the ability to transmit and receive IR signals (up to
40 kHz), connect a control device to the 5-pole captive screw connector. This port
includes only the 2 poles labeled “IR” and shares the ground pole with the RS-232
port.
NOTE: RS-232 and IR data can be transmitted simultaneously (see RS-232 and IR
Communication on page 10 for wiring details).
HDMI output — Connect a digital video display to the female HDMI connector (see HDMI
d
Audio Switch on page 14 to select local audio output options). It can accept HDMI, DVI (with
an appropriate adaptor), or DisplayPort video signals.
NOTES:
• Maximum cable length is 15 ft.
• Use Extron LockIt lacing brackets to secure HDMI connectors to the device (see
HDMI LockIt on page 8).
• Video input from a DisplayPort source must be a dual mode DisplayPort source.
IR
RS-232
Tx Rx G Tx Rx
IR
RS-232
Tx Rx G Tx Rx
XTP T HDMI Transmitter and XTP R HDMI Receiver • Installation 6
Loading...