www.extron.com
© 2008 Extron Electronics. All rights reserved.
Pricing and specifications may change without notice.
USA West
+1.714.491.1500 / +80 0.633.9876
+1.714.491.1517 FAX
USA East
+1.919.86 3.1794 / +80 0.633.9876
+1.919.86 3.1797 FA X
China
+ 86.21.3760.1568 / +4 00.883.1568
+ 86.21.3760.1566 FAX
Japan
+81.3. 3511.7655
+81.3. 3511.7656 FAX
Europe
+31.33 .453.4 040 / +800. 3987.6673
+31.33 .453.4 050 FA X
Dubai
+97 1.4.299 1800
+97 1.4.299 1880 FAX
Asia
+65.6 383.440 0 / +800.7339. 8766
+65.6 383.4664 FAX
VSW 2VGA A
Two Input VGA and Stereo Audio Switcher
c o mp u t e r & r G B S w I t c he rS
FeAtureS
•
Inputs: Video on female 15-pin HD connectors; audio on 3.5 mm stereo mini jacks
•
Outputs: Video on female 15-pin HD connectors; audio on 3.5 mm stereo mini jacks
•
Compatible with VGA-QXGA and HDTV component video signals
•
300 MHz (-3 dB) RGB video bandwidth
•
Autoswitching capabilities
•
Buffered loop through for input one
•
Front panel toggle switch for input selection
•
Multiple switchers can be daisy-chained together to create a multiuser
presentation system
•
Contact closure remote control
•
Through-desk, under-desk, and projector-mountable
•
Optional VSW I AAP remote input and control panel available, part # 70-529-x1
•
External universal power supply included, part # 70-055-01
deScriPti on
The Extron VSW 2VGA A is a compact and economical two input, one output, active switcher
for VGA and stereo audio. It allows users to select between two VGA sources with audio and
route the selected source to a video output device such as a data monitor or projector. In
addition, the VSW 2VGA A provides a buffered local monitor output for input one. Multiple
VSW 2VGA A switchers can be daisy-chained using Extron high performance pre-fabricated
VGA cable to create a multi-user presentation system.
The VSW 2VGA A is capable of switching a variety of analog video signals, including RGBHV,
RGBS, RGsB, and RGBHVS, as well as VGA–QXGA, Macintosh®, and other high resolution
computer video signals. In autoswitch mode, input sources are selected automatically when
the switcher detects an active sync signal, making the VSW 2VGA A ideal for automatic routing
and unattended operation.
The high performance VSW 2VGA A can be controlled via its front panel toggle switch or contact
closure. Housed in a quarter rack width metal enclosure with flexible mounting options, the
VSW 2VGA A is well suited for conference rooms, classrooms, multimedia production systems,
and other high resolution, computer video environments.
SPeciFicAt io nS
Vid eo
Gain . . . . . . . . . . . . . . . . . . . . . . Unity
Bandwidth . . . . . . . . . . . . . . . . 300 MHz (-3 dB)
Vid eo inP ut And Lo oP- thr ouG h
Number / Signal type . . . . . . . 2 VGA-UXGA RGBHV, RGBS, RGsB*, RsGsBs*, component video and
NOTE: *RGsB, RsGsBs, and HDTV component video inputs and outputs work in manual mode only. Autoswitching requires
TTL level sync on pin 13 of the 15-pin HD connector.
HDTV component video input
1 VGA-UXGA RGBHV, RGBS, RGsB, RsGsBs, component video and
HDTV component video local monitor loop-through
Connectors . . . . . . . . . . . . . . . . (3) 15-pin HD female
Nominal level . . . . . . . . . . . . . . 1.0 Vp-p for Y of component video
Minimum / Maximum levels . Analog: 0.4 V to 1.8 Vp-p with no offset
Impedance . . . . . . . . . . . . . . . . 75 ohms
Horizontal frequency. . . . . . . . 15 kHz to 145 kHz
Vertical frequency . . . . . . . . . . 30 Hz to 170 Hz
Vid eo out Put
Number / Signal type . . . . . . . 1 VGA-UXGA RGBHV, RGBS, RGsB*, RsGsBs*, component video and
Connectors . . . . . . . . . . . . . . . . (1) 15-pin HD female
Nominal level . . . . . . . . . . . . . . 1.0 Vp-p for Y of component video
Minimum / Maximum levels . 0.4 V to 1.8 Vp-p (follows input)
Impedance . . . . . . . . . . . . . . . . 75 ohms
NOTE: ID bits are passed through from VGA inputs to the VGA output.
Syn c
Input type . . . . . . . . . . . . . . . . . RGBHV, RGBS, RGsB*, RsGsBs*, bi-level & tri-level (HDTV) component video sync
Output type . . . . . . . . . . . . . . . RGBHV, RGBS, RGsB*, RsGsBs*, bi-level & tri-level (HDTV) component video sync
Input level . . . . . . . . . . . . . . . . 1.8 V to 5.0 Vp-p
Output level . . . . . . . . . . . . . . . TTL: 5.0 V p-p, unterminated
Input impedance . . . . . . . . . . . 510 ohms
Output impedance. . . . . . . . . . 50 ohms
Max. Rise / Fall time . . . . . . . . 40 ns
Polarity . . . . . . . . . . . . . . . . . . . Positive or negative (follows input)
Aud io
Gain . . . . . . . . . . . . . . . . . . . . . . Unbalanced output: 0 dB
Frequency response . . . . . . . . 20 Hz to 20 kHz, ±0.05 dB
THD + Noise . . . . . . . . . . . . . . . 0.002% @ 1 kHz at nominal level (-10 dBV)
S/N . . . . . . . . . . . . . . . . . . . . . . 94 dB at maximum output (unweighted)
Crosstalk . . . . . . . . . . . . . . . . . -50 dB @ 20 kHz, -75 dB @ 1 kHz and below 60 Hz
Stereo channel separation . . . 96 dB @ 1 kHz
Aud io inP ut
Number / Signal type . . . . . . . 2 stereo, unbalanced on (2) 3.5 mm mini audio jacks
Impedance . . . . . . . . . . . . . . . . 22k ohms unbalanced, AC coupled
Nominal level . . . . . . . . . . . . . . -10 dBV (316 mVrms)
Maximum level . . . . . . . . . . . . +9 dBV, (unbalanced) at 1% THD+N
Aud io out Put
Number / Signal type . . . . . . . 1 stereo, unbalanced on (1) 3.5 mm mini audio jack
Impedance . . . . . . . . . . . . . . . . 50 ohms unbalanced
Maximum level (Hi-Z) . . . . . . . >+9 dBV, unbalanced at 1% THD+N
Maximum level (600 ohm) . . . >+7 dBV, unbalanced at 1% THD+N
con tro L / re mot e — Sw itc her
Contact closure . . . . . . . . . . . . (1) 3.5 mm captive screw connector, 3 pole for momentary contact
Contact closure
pin configurations . . . . . . . . . . 1 = input 1 select, 2 = input 2 select, 3 = GND
Shorting all three pins together enables autoswitch mode.
Loop signal . . . . . . . . . . . . . . . . Momentary low, 250 µs
Gen erA L
External power supply . . . . . . 100 VAC to 240 VAC, 50/60 Hz, external, universal;
Power input requirements . . . 12 VDC, 0.1 A
Rack mount . . . . . . . . . . . . . . . Rack mountable with optional rack shelf, part #60-604-20 (RSB 123)
Enclosure type . . . . . . . . . . . . . Metal
Enclosure dimensions . . . . . . 1.0" H x 4.3" W x 3.0" D (quarter rack wide)
Product / Shipping weight . . . 0.5 lbs (0.3 kg) / 3 lbs (2 kg)
0.7 Vp-p for RGB and for R-Y and B-Y of component video
HDTV component video (follows input type)
0.7 Vp-p for RGB and for R-Y and B-Y of component video
(follows input)
to 12 VDC, 1 A (max.), regulated
Furniture mountable with optional under desk mounting kit,
part #70-077-01 (MBU 125)
2.5 cm H x 10.9 cm W x 7.6 cm D (Depth excludes connectors.)
modeL VerSion d eScriPtion PArt #
VSW 2VGA A Two Input VGA and Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60-758-01
oPtionAL AcceSSorie S modeL deS criPtion PAGe PArt #
VSW I AAP Remote Input and Control Panel AAP - Architectural Adapter Plate for
VSW 2VGA A Switcher and SW VGA rs / VGA Ars Series Switchers . . . . . . . . . . . . . . page 277 70-529-11
MBU 125 1U, 1/2 & 1/4 Rack Width, Under-Desk Mount Kit for Two-Piece Enclosure . . . . . page 815 70-077-01
VGA-A M-M MD/6 15-pin HD Male to Male Molded - 6' (1.8 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 768 26-490-02
250
Continued