Extron electronic VCR IN1403 User Manual
IN1403
Video Scaler
68-1020-01
Rev. A
12 04
Precautions
Safety Instructions • English
This symbol is intended to alert the user of important operating and maintenance
(servicing) instructions in the literature provided with the equipment.
This symbol is intended to alert the user of the presence of uninsulated dangerous
voltage within the product's enclosure that may present a risk of electric shock.
Caution
Read Instructions • Read and understand all safety and operating instructions before using the
equipment.
Retain Instructions • The safety instructions should be kept for future reference.
Follow Warnings • Follow all warnings and instructions marked on the equipment or in the user
information.
Avoid Attachments • Do not use tools or attachments that are not recommended by the equipment
manufacturer because they may be hazardous.
Consignes de Sécurité • Français
Ce symbole sert à avertir l’utilisateur que la documentation fournie avec le matériel
contient des instructions importantes concernant l’exploitation et la maintenance
(réparation).
Ce symbole sert à avertir l’utilisateur de la présence dans le boîtier de l’appareil de
tensions dangereuses non isolées posant des risques d’électrocution.
Attention
Lire les instructions• Prendre connaissance de toutes les consignes de sécurité et d’exploitation avant
d’utiliser le matériel.
Conserver les instructions• Ranger les consignes de sécurité afin de pouvoir les consulter à l’avenir.
Respecter les avertissements • Observer tous les avertissements et consignes marqués sur le matériel ou
présentés dans la documentation utilisateur.
Eviter les pièces de fixation • Ne pas utiliser de pièces de fixation ni d’outils non recommandés par le
fabricant du matériel car cela risquerait de poser certains dangers.
Sicherheitsanleitungen • Deutsch
Dieses Symbol soll dem Benutzer in der im Lieferumfang enthaltenen
Dokumentation besonders wichtige Hinweise zur Bedienung und Wartung
(Instandhaltung) geben.
Dieses Symbol soll den Benutzer darauf aufmerksam machen, daß im Inneren des
Gehäuses dieses Produktes gefährliche Spannungen, die nicht isoliert sind und
die einen elektrischen Schock verursachen können, herrschen.
Achtung
Lesen der Anleitungen • Bevor Sie das Gerät zum ersten Mal verwenden, sollten Sie alle Sicherheits-und
Bedienungsanleitungen genau durchlesen und verstehen.
Aufbewahren der Anleitungen • Die Hinweise zur elektrischen Sicherheit des Produktes sollten Sie
aufbewahren, damit Sie im Bedarfsfall darauf zurückgreifen können.
Befolgen der Warnhinweise • Befolgen Sie alle Warnhinweise und Anleitungen auf dem Gerät oder in
der Benutzerdokumentation.
Keine Zusatzgeräte • Verwenden Sie keine Werkzeuge oder Zusatzgeräte, die nicht ausdrücklich vom
Hersteller empfohlen wurden, da diese eine Gefahrenquelle darstellen können.
Warning
Power sources • This equipment should be operated only from the power source indicated on the
product. This equipment is intended to be used with a main power system with a grounded
(neutral) conductor. The third (grounding) pin is a safety feature, do not attempt to bypass or
disable it.
Power disconnection • To remove power from the equipment safely, remove all power cords from
the rear of the equipment, or the desktop power module (if detachable), or from the power
source receptacle (wall plug).
Power cord protection • Power cords should be routed so that they are not likely to be stepped on or
pinched by items placed upon or against them.
Servicing • Refer all servicing to qualified service personnel. There are no user-serviceable parts
inside. To prevent the risk of shock, do not attempt to service this equipment yourself because
opening or removing covers may expose you to dangerous voltage or other hazards.
Slots and openings • If the equipment has slots or holes in the enclosure, these are provided to
prevent overheating of sensitive components inside. These openings must never be blocked by
other objects.
Lithium battery • There is a danger of explosion if battery is incorrectly replaced. Replace it only
with the same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer's instructions.
Avertissement
Alimentations• Ne faire fonctionner ce matériel qu’avec la source d’alimentation indiquée sur
l’appareil. Ce matériel doit être utilisé avec une alimentation principale comportant un fil de
terre (neutre). Le troisième contact (de mise à la terre) constitue un dispositif de sécurité :
n’essayez pas de la contourner ni de la désactiver.
Déconnexion de l’alimentation• Pour mettre le matériel hors tension sans danger, déconnectez tous
les cordons d’alimentation de l’arrière de l’appareil ou du module d’alimentation de bureau (s’il
est amovible) ou encore de la prise secteur.
Protection du cordon d’alimentation • Acheminer les cordons d’alimentation de manière à ce que
personne ne risque de marcher dessus et à ce qu’ils ne soient pas écrasés ou pincés par des
objets.
Réparation-maintenance • Faire exécuter toutes les interventions de réparation-maintenance par un
technicien qualifié. Aucun des éléments internes ne peut être réparé par l’utilisateur. Afin
d’éviter tout danger d’électrocution, l’utilisateur ne doit pas essayer de procéder lui-même à ces
opérations car l’ouverture ou le retrait des couvercles risquent de l’exposer à de hautes tensions
et autres dangers.
Fentes et orifices • Si le boîtier de l’appareil comporte des fentes ou des orifices, ceux-ci servent à
empêcher les composants internes sensibles de surchauffer. Ces ouvertures ne doivent jamais
être bloquées par des objets.
Lithium Batterie • Il a danger d'explosion s'll y a remplacment incorrect de la batterie. Remplacer
uniquement avec une batterie du meme type ou d'un ype equivalent recommande par le
constructeur. Mettre au reut les batteries usagees conformement aux instructions du fabricant.
Vorsicht
Stromquellen • Dieses Gerät sollte nur über die auf dem Produkt angegebene Stromquelle betrieben
werden. Dieses Gerät wurde für eine Verwendung mit einer Hauptstromleitung mit einem
geerdeten (neutralen) Leiter konzipiert. Der dritte Kontakt ist für einen Erdanschluß, und stellt
eine Sicherheitsfunktion dar. Diese sollte nicht umgangen oder außer Betrieb gesetzt werden.
Stromunterbrechung • Um das Gerät auf sichere Weise vom Netz zu trennen, sollten Sie alle
Netzkabel aus der Rückseite des Gerätes, aus der externen Stomversorgung (falls dies möglich
ist) oder aus der Wandsteckdose ziehen.
Schutz des Netzkabels • Netzkabel sollten stets so verlegt werden, daß sie nicht im Weg liegen und
niemand darauf treten kann oder Objekte darauf- oder unmittelbar dagegengestellt werden
können.
Wartung • Alle Wartungsmaßnahmen sollten nur von qualifiziertem Servicepersonal durchgeführt
werden. Die internen Komponenten des Gerätes sind wartungsfrei. Zur Vermeidung eines
elektrischen Schocks versuchen Sie in keinem Fall, dieses Gerät selbst öffnen, da beim Entfernen
der Abdeckungen die Gefahr eines elektrischen Schlags und/oder andere Gefahren bestehen.
Schlitze und Öffnungen • Wenn das Gerät Schlitze oder Löcher im Gehäuse aufweist, dienen diese
zur Vermeidung einer Überhitzung der empfindlichen Teile im Inneren. Diese Öffnungen dürfen
niemals von anderen Objekten blockiert werden.
Litium-Batterie • Explosionsgefahr, falls die Batterie nicht richtig ersetzt wird. Ersetzen Sie
verbrauchte Batterien nur durch den gleichen oder einen vergleichbaren Batterietyp, der auch
vom Hersteller empfohlen wird. Entsorgen Sie verbrauchte Batterien bitte gemäß den
Herstelleranweisungen.
Instrucciones de seguridad • Español
Este símbolo se utiliza para advertir al usuario sobre instrucciones importantes de
operación y mantenimiento (o cambio de partes) que se desean destacar en el
contenido de la documentación suministrada con los equipos.
Este símbolo se utiliza para advertir al usuario sobre la presencia de elementos con
voltaje peligroso sin protección aislante, que puedan encontrarse dentro de la caja
o alojamiento del producto, y que puedan representar riesgo de electrocución.
Precaucion
Leer las instrucciones • Leer y analizar todas las instrucciones de operación y seguridad, antes de usar
el equipo.
Conservar las instrucciones • Conservar las instrucciones de seguridad para futura consulta.
Obedecer las advertencias • Todas las advertencias e instrucciones marcadas en el equipo o en la
documentación del usuario, deben ser obedecidas.
Evitar el uso de accesorios • No usar herramientas o accesorios que no sean especificamente
recomendados por el fabricante, ya que podrian implicar riesgos.
Advertencia
Alimentación eléctrica • Este equipo debe conectarse únicamente a la fuente/tipo de alimentación
eléctrica indicada en el mismo. La alimentación eléctrica de este equipo debe provenir de un
sistema de distribución general con conductor neutro a tierra. La tercera pata (puesta a tierra) es
una medida de seguridad, no puentearia ni eliminaria.
Desconexión de alimentación eléctrica • Para desconectar con seguridad la acometida de
alimentación eléctrica al equipo, desenchufar todos los cables de alimentación en el panel trasero
del equipo, o desenchufar el módulo de alimentación (si fuera independiente), o desenchufar el
cable del receptáculo de la pared.
Protección del cables de alimentación • Los cables de alimentación eléctrica se deben instalar en
lugares donde no sean pisados ni apretados por objetos que se puedan apoyar sobre ellos.
Reparaciones/mantenimiento • Solicitar siempre los servicios técnicos de personal calificado. En el
interior no hay partes a las que el usuario deba acceder. Para evitar riesgo de electrocución, no
intentar personalmente la reparación/mantenimiento de este equipo, ya que al abrir o extraer las
tapas puede quedar expuesto a voltajes peligrosos u otros riesgos.
Ranuras y aberturas • Si el equipo posee ranuras o orificios en su caja/alojamiento, es para evitar el
sobrecalientamiento de componentes internos sensibles. Estas aberturas nunca se deben obstruir
con otros objetos.
Batería de litio • Existe riesgo de explosión si esta batería se coloca en la posición incorrecta. Cambiar
esta batería únicamente con el mismo tipo (o su equivalente) recomendado por el fabricante.
Desachar las baterías usadas siguiendo las instrucciones del fabricante.
Table of Contents
Product Overview............................................................................................................ 2
Description...................................................................................................................... 2
Features........................................................................................................................... 2
Compatibility..................................................................................................................... 3
Input................................................................................................................................ 3
Output............................................................................................................................. 3
Installation.......................................................................................................................... 4
IN1403 application diagram .......................................................................................... 5
Operation............................................................................................................................. 5
Front panel controls ....................................................................................................... 5
On-screen menu ............................................................................................................. 6
On-screen menu display system .................................................................................... 7
Menu Commands............................................................................................................. 8
Video menu .................................................................................................................... 8
Audio menu.................................................................................................................. 10
Input menu ................................................................................................................... 11
Output menu ................................................................................................................ 14
Advanced menu ........................................................................................................... 14
Choosing the Optimal Resolution and Refresh Rate................................... 15
CRT displays: Selecting the golden resolution .......................................................... 15
CRT displays: Selecting the optimal refresh rate....................................................... 16
Fixed pixel displays: Selecting the optimal resolution and refresh rate.................. 16
Advanced Operation .................................................................................................... 18
Pass-through RGB video............................................................................................... 18
Output RGB connectors ............................................................................................... 18
Output modes............................................................................................................... 18
Power-on settings ........................................................................................................ 19
Output positioning ...................................................................................................... 19
RS-232 Remote Operation ......................................................................................... 19
RS-232 control............................................................................................................... 19
IN1403 serial commands .............................................................................................. 21
Troubleshooting............................................................................................................. 24
Specifications
.................................................................................................................. 26
Part Numbers .................................................................................................................. 27
Product Overview
Description
The IN1403 is a full featured video scaler that combines digital video decoding, advanced video
scaling/line multiplication and a 4-input A/V switcher into a single product.
Features
Superb Video Scaling Technology — Employing sophisticated video de-interlacing, scaling and
filtering techniques, the IN1403 offers an output signal with outstanding image detail and enhanced
brightness that is entirely free of visible scan lines. The scaler automatically senses the origin of the
video source material and selects the optimum motion compensation formula to eliminate unwanted
artifacts in the output image. The IN1403 employs high bandwidth digital signal processing and high
speed digital to analog conversion, combined with effective filtering and sharpness circuitry to
maintain and enhance image detail, even at the highest output resolutions.
Advanced Quad Standard Video Decoding — A high quality video decoder in the IN1403 provides
accurate video decoding of composite video and S-video signals in the NTSC, PAL, SECAM and NTSC
4.43 video standards. The video decoder employs an advanced 3-line adaptive comb filter for
composite video signals and greatly reduces cross-color interference and hanging dots, while
maintaining maximum image bandwidth and detail.
Pick the Perfect Resolution — The IN1403 offers a wide range of output resolutions to match the
optimum or native resolution of virtually any display device. The IN1403 provides a progressive scan
output signal at standard resolutions and refresh rates, ensuring optimal compatibility and
exceptional image quality with a wide range of CRT, LCD, DMD, ILA, D-ILA, and plasma display
devices.
Selectable Refresh Rate — The IN1403 output vertical refresh rate is adjustable from 60 Hz to 120 Hz
By converting PAL (25 Hz) and NTSC (30 Hz) input signals to higher, more ergonomic refresh rates,
the IN1403 makes it possible to display a remarkably solid, flicker-free image when using CRT
monitors and projectors. The chart on page 18 indicates the output resolutions and refresh rates
available on the IN1403.
4-Input Video/Audio Switcher — The IN1403 provides multiple inputs and flexible switching
capability to accommodate a variety of applications. Inputs 1, 2, and 3 can each accept a composite
video or S-video signal. Input 4 is a 15-pin HD VGA pass-through connector for a computer video
signal (passive, no scaling). Stereo audio-follow-video switching is provided for all four inputs.
Memory — The IN1403 can recall previously stored settings with the push of a single button. All
audio, video, input and output settings, for each input and each output mode, are stored internally (in
memory). Once optimized, all adjustments are automatically recalled every time an input is selected.
Digital Freeze Frame — Provides a high quality still image, useful for applications that require close
examination of a specific video frame. Freeze Frame can be enabled/disabled using the front panel
FREEZE FRAME button or an RS-232 serial command. Freeze is functional for Inputs 1, 2, and 3. It
has no effect on Input 4, which is a passive input.
Video Blank button — Located adjacent to the input selector buttons, the BLANK button allows the
video image to be suppressed. When blank is engaged, the output signals go to black but the sync
signals continue, ensuring that the data display device retains sync lock. When the BLANK button is
pressed a second time, the previously selected input is once again displayed. The blank feature can
also be engaged or disengaged using the RS-232 serial command. Video blank is functional for Inputs
1, 2, and 3. It has no effect on Input 4, which is a passive input.
On Screen Menus — Provides easy control over video adjustments including hue, color, contrast,
brightness, gamma, sharpness, image size, image position, and edge blanking. Unique image settings
can be optimized and stored for each input. Each time an input is selected, all image settings stored
for that input are automatically recalled. The on-screen menus also make it easy to verify and adjust
advanced settings such as output signal resolution, refresh rate, sync format, RS-232 control options,
and reset to factory default.
2
IN1403 User’s Manual
System Info — A handy menu option that uses the on-screen display to show comprehensive
information about the input and output signals and scaler settings.
Image Size, Position and Edge Blanking Controls — Individual horizontal and vertical image
adjustments make it easy to precisely fit the active video image to the display area and provide for
multiple aspect ratios.
Comprehensive Input Adjustment Controls — These input signal adjustments include signal format,
aspect ratio and horizontal tracking. Once adjustments are made to optimize input signals, these
settings are stored and automatically recalled when the same input source is selected again.
Blue Screen Feature — Provides a full screen blue image for setup and testing purposes. The blue
screen output signal (activated via the on-screen menu) is always available, even when the input
signal is missing or the input settings are incorrectly adjusted. Blue screen acts as a test signal and is
ideal for setting up the output resolution, refresh rate and position settings, and to verify connection to
the output display device.
RS-232 Serial Control — Provided for all scaler functions including input selections, image
adjustments and output settings. The IN1403’s comprehensive RS-232 control capacity facilitates
complete system integration and effortless control when combined with a third party control system.
Dual Outputs — The IN1403 features a 5-BNC output and a 15-pin HD output. Since both are active
simultaneously, the IN1403 can directly drive two separate display devices.
Rack Mountable — The IN1403 can be mounted in a 1U rack space using the provided mounting
brackets (Extron part # 70-391-01).
Compatibility
Input
The IN1403 Video Scaler accepts composite and S-video signals in the NTSC, PAL, SECAM, and NTSC
4.43 video standards on inputs 1, 2, and 3. The unit automatically senses NTSC, PAL, and SECAM
video standards and decodes the signal appropriately. You must select composite video or S-video
mode as appropriate for each of these inputs. Input 4 is a passive input (no decoding or scaling)
designed to accept a VGA computer video signal.
The IN1403 has stereo audio-follow-video capability. All four stereo audio inputs are compatible with
unbalanced line level signals from a computer audio card, CD player, laser disc player, or any other
audio device that delivers a stereo line level signal.
Output
The IN1403 features selectable output resolutions (ranging from 640 x 480 up to 1365 x 1024) to match
the optimum or native resolution of virtually any display device. The unit provides a progressive
output signal at standard resolutions and refresh rates, ensuring optimal compatibility and
exceptional image quality with a wide range of CRT, LCD, DMD, D-ILA/LCOS, and plasma display
devices.
The output refresh rate is also selectable as desired. When used with LCD, DMD, or LCOS displays,
the 60 Hz output setting is recommended. Higher output refresh rates may be selected for use on
CRT-type displays in order to reduce flicker and provide enhanced ergonomics. The chart on page 18
indicates the available output resolutions and refresh rates.
The stereo audio output provides an unbalanced line level signal, identical to the input signal. This
output can drive any line level compatible audio unit, or a local device such as a set of powered
speakers.
IN1403 User’s Manual
3
Installation
This section offers step-by-step instructions for installing the IN1403 Video Scaler. An application
diagram is provided on page 5.
CAUTION
1. Place or install the IN1403 at the desired location. Make sure that the unit is seated on a flat
surface or is securely installed in a standard 19” equipment rack. The IN1403 is exactly 1U high
without the feet. If other equipment will be located in the space directly below the scaler, the
rubber feet on the bottom of the unit must be removed before you mount it in the equipment rack.
2. Connect the video sources to the IN1403 input(s). Inputs 1, 2, and 3 can accept either a composite
video signal (BNC female) or an S-video signal (4-pin mini DIN female). Input 4 is a 15-pin HD
VGA pass-through connector for a computer video signal.
CAUTION
3. Connect the audio sources to the IN1403 stereo audio inputs (dual RCA female jacks). A
computer sound card can be connected using an optional 3.5 mm stereo mini male to 2 RCA male
cable.
4. The IN1403 features a 5-BNC output and a 15-pin HD output, providing easy connections for a
variety of data monitors, data projectors and other data-grade displays.
• VGA display devices can be connected directly to the IN1403 output port using a
• Data output devices that feature an RGB video input can be connected directly to the
Since both outputs are active simultaneously, the IN1403 can directly drive two separate display
devices.
Read the instructions carefully before initiating the installation procedure. Make sure that
there is no power connected to the IN1403, and that the power button is off.
The input signals must be connected to only the composite video or the S-video connector on
any one input. Do not connect composite video and S-video signals simultaneously on the
same input!
standard male-to-male VGA cable.
IN1403 using three, four, or five BNC cables (for RGsB, RGBS, or RGBHV, respectively)
or a multi-conductor RGBHV, RGBS, or RGB “snake.” While making connections, take
care to ensure that the red output is connected to the red input, green output is
connected to the green input, etc.
5. Connect the IN1403 stereo audio output to the audio system’s input (mixer, amplifier, powered
speakers, etc.).
6. Connect a control system, computer, or other source for serial commands to the RS-232 remote
connector if desired. For more information about remote control of the IN1403, see the Remote
Operation section on page 19.
7. Connect power to the IN1403 using the included power cable.
8. Turn on the video sources, the IN1403, the display device, and the audio output equipment (if
applicable).
9. Using the front panel controls or RS-232 commands, adjust and store the parameters for each
input source.
It is very important that you set each input for composite video or S-video operation as appropriate
to match the format of the input signal (see page 11 for details).
10. Set the output resolution and refresh rate to match the optimum or native resolution of your
display device as described in Output menu on page 14. If you need assistance selecting the
appropriate resolution and refresh rate for your display, see Choosing the Optimal Output Resolution
and Refresh Rate section on page 15.
4
IN1403 User’s Manual
IN1403 application diagram
Figure 1 — IN1403 application diagram
IN1403 RGB Video Scaler
Operation
This section focuses on operating the IN1403 using the front panel controls and commands. All video
and audio adjustments, setup functions and switching operations can be performed through the front
panel or via RS-232 serial controls (see page 19)
INPUT SELECT
Front Panel Controls
Input Select: The large buttons in the Input Select section, labeled INPUT 1, INPUT 2, INPUT 3 and
INPUT 4 are used to select the desired input. After turning on the IN1403, press and release the
desired Input Select button. A green LED will light underneath the button to indicate the selected
input. The stereo audio signal associated with the input will automatically be selected at the same
time. All audio, video, and input settings for each input are stored internally (in memory) so the
adjustment(s) will not have to be repeated after they are optimized. To switch to another input,
simply press and release another numbered Input Select button.
When powered up, the scaler automatically returns to the last configuration, including the last
input selected.
Blank: The BLANK button can be used at any time to show a blank screen on the display device.
When blank is engaged, the output setting goes to black but the sync signals continue, ensuring that
the data display device retains sync lock. Simply press and release the button to engage blanking (the
green LED underneath the button will illuminate), and press and release it again to disengage. The
BLANK button has no effect on input 4, which is a passive input.
RGB-PASSIVEVIDEOVIDEOVIDEO
FREE ZE
FRAM E
VOLUME
MUTE
AUDIO
MENU ENTER
IN1403 User’s Manual
5
Freeze Frame: Allows users to freeze the video signal and display a still image. Simply press and
release the button to engage the function (the green LED below the button will illuminate), then press
and release it again to disengage. The FREEZE FRAME button has no effect on input 4, which is a
passive input.
Volume: The VOLUME buttons regulate the level of the audio signals routed through the scaler. Use
/ volume buttons to increase or decrease the audio level for the current input. Press and
the
release a button to raise or lower the volume level by one step, or press and hold a button to change
the level continuously. The IN1403 saves the volume levels for each input automatically.
Audio Mute: Mutes the audio for the selected input. Press the button to engage (the green LED
below the button will illuminate), and press again to disengage.
Menu buttons: The remaining buttons on the front panel (MENU,
to access and adjust the on-screen menu displays.
, , ,
and ENTER) are used
On-screen menu
To access the main menu, press the MENU or ENTER button. Use the arrow buttons to maneuver
around within the menu display. Press ENTER to select and save a command, or press MENU to
escape to the previous menu or to clear the menu display. All audio, video, input, and output settings
for each input and each output mode are stored internally (in memory) so the adjustments will not
have to be repeated after they are optimized.
The Main Menu commands and their functions are:
Video: Changes input signal video parameters.
Audio: Changes input signal audio parameters.
Input: Changes input signal timing format parameters.
Output: Changes output signal resolution and format parameters.
Advanced: Displays advanced options.
An illustration of the on-screen display menu system is provided on the next page.
6
IN1403 User’s Manual
IN1403 on-screen display menu system
Main Menu
Video
Audio
Input
Output
Advanced
Video Audio
Brightness Bass Signal Format Resolution Factory Reset
Contrast Treble Aspect Ratio Refresh Rate Baud Rate
Color Balance Hz Tracking Size Delimiters
Hue Reset Audio Reset Input Position System Info
Sharpness Sync Format Reset RS-232
Gamma Signal Format Blue Screen
Noise Filter Input 1 Reset Output Factory Reset
Comb/Trap* Input 2 Yes
Reset Video Input 3 Resolution No
Input 4 640 x 480
Comb/Trap 800 x 600 Baud Rate
Comb Filter On Aspect Ratio 852 x 480 1200
Trap Filter On Standard 1024 x 768 2400
Anamorphic 1152 x 864 4800
Wide screen 1280 x 720 9600
Wider screen 1280 x 1024 19,200
Expand 1365 x 768 38,400
1365 x 1024 57,600
Hz Tracking
Very Fast Refresh Rate** Delimiters
Fast 56 Parentheses ( )
Normal 60 Brackets [ ]
Slow 65 Braces { }
72 Slashes \ /
75 Less & Greater < >
85 Signs ! #
96
100 System Info
120 Input
Standard
Size Horizontal
H-Size Vertical
V-Size Output
Horizontal
Position Vertical
H-Position Sync
V-Position Version
Sync Format
RGBHV--
RGBHV++
RGBS A
RGBS B
RGsB A
RGsB B
*Available only on composite video.
Blue Screen
Input Output Advanced
On/Off
IN1403 User’s Manual
7
Menu Commands
Video Menu
The IN1402 allows you to manually adjust the brightness, contrast, color, hue, sharpness, gamma,
noise filter, and comb/trap filter settings.
To access the video adjustment menu via the front panel control buttons
1. Press the desired Input Select button.
2. Press MENU.
3. Press the
4. Press ENTER.
or button (if necessary) to reach the video menu.
5. Use the
6. After selecting a setting, use the
7. Press and release a button to move one step in either direction.
8. Press and hold a button to move continuously through the adjustment range.
9. Press ENTER to save when the input is optimized.
CAUTION
function, otherwise your new adjustment will be lost.
and buttons and the ENTER key to select the setting you wish to adjust.
and buttons to make the adjustments.
It is critical that you save the setting before proceeding to another input or another menu
The following video adjustment parameters can be controlled via the on-screen menu system (front
panel buttons). Remote operation instructions can be found on page 19.
Brightness Setting adjusts the input signal brightness.
Range: 0 to 255
Factory default setting: 128
Operation:
Press
Press
Contrast adjusts the difference between the input signal’s brightest and darkest settings. At the
minimum setting the screen picture displays at about the same brightness (very grayish). The
maximum setting displays a noticeable difference between the darkest and lightest parts of the screen
picture.
button to increase the brightness.
button to decrease the brightness.
Range: 0 to 255
Factory default setting: 128
Operation:
Press
Press
Color adjusts the color saturation of the picture over a wide range. Setting this control to 0 removes
most of the color.
Range: 0 to 255
Factory default setting: 140
Operation:
Press
Press
8
IN1403 User’s Manual
button to increase the contrast.
button to decrease the contrast.
button to increase the color.
button to decrease the color.
Loading...