
RS-232
1
2
SW12 VGA Ars
3
4
5
6
7
8
9
10
11
12
1
2
I
N
P
U
T
S
O
U
T
P
U
T
S
OUTPUTS
4/8 Ohms SPEAKERS
INPUTS
MPA 122
Control
System
Extron
SW12 VGA Ars
VGA w/ Audio
Switcher
Projector
Local
Monitor
Extron
MPA 122
Mini Power
Amplier
Laptop
Laptop
Extron
VSW I AA P
Archite ctural Adapter Pl ate
Extron
VSW I AA P
Archite ctural Adapter Pl ate
Extron
SI 26X
Two-Way Ceiling
Speakers
Description coMMon featUres
The SW VGA Series are VGA switchers with two, four, six, eight, and twelve
■ 350 MHz (-3dB) RGB video bandwidth – Offers the performance required
inputs. They are designed for applications where multiple high resolution
computer video and HDTV component video signals must be switched to one
or two displays. The SW VGA Series switchers are ideal for small to mid-sized
■ Compatible with VGA-QXGA and HDTV component video signals
■ Auto-input switching – Automatically switches to the highest-numbered
applications where high resolution switching is needed. There are several key
features common to all models in this series which benefi t integrators and
■ Input signal sensing – Automatically detects which inputs have an active
end-users, alike.
All models feature input signal sensing, which automatically detects which
inputs have an active signal and reports that information through the RS-232
port for confi rmation of active inputs on third party control systems. This offers
quick confi rmation of active inputs on any third-party control system. Another
■ Switches balanced and unbalanced stereo audio
■ Active PC audio buffering – converts unbalanced PC audio to balanced, line
■ Compatible with Extron VSW I AAP – The optional VSW I AAP provides
feature common to all models is Auto-input switching, which automatically
switches to the highest-numbered input with an active video signal. All
■ Multiple control options – Switcher operations can be controlled through
switchers in this series can also be controlled via their front panel, RS-232, and
contact closure remote control, and via the optional Extron IR 102 handheld
remote control. All of the
SW VGA
models are housed in 1U, rack-mountable
metal enclosures, for easy integration into new or existing A/V environments.
All SW VGA Series switchers feature active PC audio buffering, which converts
unbalanced PC audio to balanced, line level signals, eliminating noise over
long cable runs. The switchers accept PC audio input on 3.5mm mini stereo
jacks for fast, easy connection with pre-terminated Extron VGA and Audio
cables. Balanced or unbalanced audio is output on captive screw connectors.
■ IR control – The SW VGA Series switchers can be conveniently controlled via
■ Internal universal power supply – The 100-240VAC, 50/60 Hz, international
UniQUe featUres - sw2, sw4 & sw6 Vga series
■ Two, four, or six inputs
■ One output
■ 1U, half rack width metal enclosure
to maintain signal integrity with the most demanding high resolution signals.
input with an active video signal.
signal and reports that information through the RS-232 port for confi rmation
of active inputs on third party control systems.
level signals, eliminating noise over long cable runs.
remote input connection and selection, which is useful in multiple-participant
presentation environments.
the front panel, RS-232, or contact closure.
IR remote control with the optional Extron IR 102 Kit.
power supply provides worldwide power compatibility.
The SW8 VGA and SW12 VGA Series feature dual buffered video and audio
outputs which simultaneously output program video and audio on two parallel
outputs. This eliminates the additional cost of a VGA & audio distribution
amplifi er for dual-display applications.
UniQUe featUres - sw8 & sw12 Vga series
■ Eight and twelve inputs
■ Audio output volume control via RS-232 – Eliminates the need for a
separate audio preamp in many system designs.
■ Dual buffered video and audio outputs – Simultaneously output program
video and audio on two parallel outputs, eliminating the additional cost of a
VGA & audio distribution amplifi er for dual-display applications.
■ 1U, full rack width metal enclosure

specifications
Video
Gain ................................................... Unity
Bandwidth ........................................... 350 MHz (-3 dB)
Crosstalk .............................................. -68 dB @ 10 MHz
Video input
Number/signal type ............................. 2, 4, 6, 8, or 12 (depending on the model)
Connectors .......................................... Female 15-pin HD
Nominal level ....................................... 1.0 Vp-p for Y of component video
Minimum/maximum levels .................. Analog: 0.3 V to 1.5 Vp-p with no offset
Impedance ........................................... 75 ohms
Horizontal frequency ............................ 15 kHz to 145 kHz
Vertical frequency ................................ 30 Hz to 170 Hz
Return loss ........................................... -40 dB @ 5 MHz
Input coupling ..................................... DC
VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs
computer video, and HDTV component video
0.7 Vp-p for RGB and for R-Y and B-Y
of component video
Video output
Number/signal type
SW2/4/6 VGA Series ......................... 1 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs
SW8/12 VGA Series .......................... 2 VGA-QXGA RGBHV, RGBS, RGsB, RsGsBs
Connectors
SW2/4/6 VGA Series ......................... 1 female 15-pin HD
SW8/12 VGA Series .......................... 2 female 15-pin HD
Nominal level ....................................... 1.0 Vp-p for Y of component video
Minimum/maximum levels .................. 0.3 V to 1.5 Vp-p (follows input)
Impedance ........................................... 75 ohms
Return loss ........................................... -43 dB @ 5 MHz
DC offset ............................................. ±5 mV with input at 0 offset
computer video, and HDTV component video
(follows input type)
computer video, and HDTV component video
(follows input type)
0.7 Vp-p for RGB and for R-Y and B-Y
of component video
synC
Input type ............................................ RGBHV, RGBS, RGsB, RsGsBs, bi-level and
Output type ......................................... RGBHV, RGBS, RGsB, RsGsBs, bi-level and
Input level ............................................ 1.0 V to 5.0 Vp-p
Output level ......................................... TTL: 5.0 Vp-p, unterminated
Input impedance ................................. 510 ohms
Output impedance .............................. 75 ohms
Max. propagation delay
SW2/4/6 VGA Series ......................... 47 ns
SW8/12 VGA Series .......................... 54 ns
Max. rise/fall time
SW2/4/6 VGA Series ......................... 4.2 ns
SW8/12 VGA Series .......................... 4.7 ns
Polarity ................................................ Positive or negative (follows input)
Gain
Audio
SW2/4/6 VGA Series .........................
SW8/12 VGA Series ..........................
Frequency response ............................. 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ........................................ 0.01% @ 1 kHz at nominal level
S/N ................................................... >90 dB at maximum output (unweighted)
Crosstalk .............................................. -45 dB @ 1 kHz, fully loaded
Stereo channel separation
SW2/4/6 VGA Series ......................... >80 dB @ 20 Hz to 20 kHz
SW8/12 VGA Series .......................... >80 dB 1 kHz
tri-level sync
tri-level sync (follows input)
Unbal. output: +6 dB; bal. output: +12 dB
Unbal. output: +0 dB; bal. output: +6 dB
Audio input
Number/signal type ............................. Stereo, unbalanced
Connectors .......................................... Female 3.5 mm stereo mini jacks; tip (L), ring
Impedance ........................................... >10k ohms unbalanced, DC coupled
Nominal level ....................................... -10 dBV (316 mV)
Maximum level
SW2/4/6 VGA Series ......................... +16 dBV, (unbalanced) at 1% THD+N
SW8/12 VGA Series .......................... +14 dBV, (unbalanced) at 1% THD+N
NOTE: 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
(R), sleeve (Gnd)
Audio output
Number/signal type
SW2/4/6 VGA Series ......................... 1 stereo, balanced/unbalanced
SW8/12 VGA Series .......................... 2 stereo, balanced/unbalanced
Connectors
SW2/4/6 VGA Series ......................... (1) 3.5 mm captive screw connector, 5 pole
SW8/12 VGA Series .......................... (2) 3.5 mm captive screw connectors, 5 pole
Impedance ........................................... 50 ohms unbalanced, 100 ohms balanced
Nominal level
SW2/4/6 VGA Series ......................... +4 dBu (1.23 V), balanced
SW8/12 VGA Series .......................... +4 dBu (1.23 Vrms), balanced
Variable output volume range (SW8/12 VGA Series only)
Maximum level (Hi-Z) .......................... +28 dBu, balanced; +20 dBV, unbalanced at
Maximum level (600 ohm) .................. +21 dBm, balanced; +18 dBm, unbalanced
-4 dBV (0.63 V), unbalanced
-10 dBV (316 mVrms), unbalanced
0 to 100 (-84 dB to 0 dB),
default = 100 = 0 dB
1%THD+N
at 1%THD+N
Control/remote — switCher
Serial control port
SW2/4/6 VGA Series ......................... RS-232 9-pin female D connector (shared with
SW8/12 VGA Series .......................... RS-232 9-pin female D connector
Baud rate and protocol ........................ 9600 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations ........... 2 = TX, 3 = RX, 5 = GND
Contact closure (SW2/4/6 VGA Series only)
Contact closure pin configurations (SW2/4/6 VGA Series only)
“Show Me” contact closure ................. Pin 5 of each VGA input connector.
Program control ................................... Extron’s Universal Switcher control/
contact closure)
RS-232 9-pin female D connector (shared
with RS-232)
1 = input #1, 4 = input #2,
6 = input #3, 7 = input #4,
8 = input #5, 9 = input #6; active when a pin
momentarily shorts to ground
The input is active (selected) when pin
5 momentarily goes to ground.
configuration program for Windows
Extron’s Simple Instruction Set (SIS
®
™
)
GenerAl
Power .................................................. 100 VAC to 240 VAC, 50/60 Hz, 10 watts,
Cooling ................................................ Convection, no vents
Mounting
Rack mount ...................................... Yes, with optional 1U, 9.5” deep rack shelf
Furniture mount ............................... Yes, with optional under-desk mounting kit,
Enclosure type ..................................... Metal
Enclosure dimensions (Depth excludes connectors.)
SW2/4/6 VGA Series ......................... 1.75" H x 8.75" W x 9.5" D (1U high, half rack
SW8/12 VGA Ars............................... 1.75" H x 17.5" W x 9.5" D (1U high, full rack
Product weight
SW2/4/6 VGA Series ......................... 2.5 lbs (1.1 kg)
SW8/12 VGA Ars............................... 6.3 lbs (2.9 kg)
Shipping weight
SW2/4/6 VGA Series ......................... 5 lbs (3 kg)
SW8/12 VGA Ars............................... 11 lbs (5 kg)
Vibration .............................................. ISTA 1A in carton (International Safe Transit
Listings ................................................ UL, CUL
Compliances ........................................ CE, FCC Class A, VCCI, AS/NZS, ICES
MTBF ................................................... 30,000 hours
Warranty .............................................. 3 years parts and labor
NOTE: All nominal levels are at ±10%.
Model Version Description Part Number
SW2 VGA Ars Two Input VGA with Audio ........ 60-257-22
SW4 VGA Ars Four Input VGA with Audio ........ 60-258-22
SW6 VGA Ars Six Input VGA with Audio .......... 60-259-22
SW8 VGA Ars Eight Input VGA with Audio ....... 60-902-21
SW12 VGA Ars Twelve Input VGA with Audio .... 60-946-21
Specifications are subject to change without notice.
internal
(RSU 129, #60-190-01; RSB 129, 60-604-01)
part #70-077-01 (MBU 125), or through-desk
mounting kit, part #70-077-02 (MBD 129)
wide) (4.4 cm H x 22.2 cm W x 24.1 cm D)
wide) (4.4 cm H x 44.4 cm W x 24.1 cm D)
(Depth excludes connectors)
Association)