Extron electronic SW4 ARxi, SW2 ARxi User Manual

Specifications — SW2 AR

Video

Gain ............................................... Unity

Bandwidth .................................... 350 MHz (-3dB)

Switching speed ........................... 5 mS (max.)

Video input

Number/signal type ................... 2 (SW 2 ARxi) or 4 (SW 4 ARxi) RGBS, RGsB, RsGsBs, component video, S-video,

NTSC/PAL/SECAM composite video

Connectors .................................... 2 (SW 2 ARxi) or 4 (SW 4 ARxi) x 4 BNC female

Minimum/maximum levels ...... Analog ....... 0.3V to 1.5V p-p with no offset

Impedance .................................... 75 ohms

Horizontal frequency .................. 15 kHz to 145 kHz

Vertical frequency ....................... 30 Hz to 170 Hz

Return loss .................................... -30dB @ 5 MHz

Video output

Number/signal type ................... 1 RGBS, RGsB, RsGsBs, component video, S-video, NTSC/PAL/SECAM

composite video

Connectors .................................... 4 BNC female

Minimum/maximum levels ...... Analog ....... 0.3V to 1.5V p-p

Impedance .................................... 75 ohms

xixi

xi and SW4 AR

xixi

xixi

xi Switchers

xixi

Sync

Input type ..................................... Analog RGBS, RGsB, RsGsBs

Output type .................................. RGBS, RGsB, RsGsBs

Standards ...................................... NTSC, PAL, SECAM

Input level ..................................... 1V to 5V p-p

Output level.................................. 5V p-p

Input impedance .......................... 510 ohms

Output impedance ...................... 75 ohms

Polarity .......................................... Positive and negative

Control/remote — switcher

Contact closure ............................ 1 25-pin D female connector

Extron remote key pad control .. 1 25-pin D female connector ........... use with the Extron KP-10

IR controller module ................... 1 25-pin D female connector ........... use with the Extron IR-101

General

Power............................................. 100VAC to 240VAC, 50/60 Hz, 10 watts, internal, auto-switchable

Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing

Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing

Rack mount ................................... Yes (2U high, ½-rack width), with optional shelf, part #60-030-01

Enclosure type .............................. Metal

Enclosure dimensions ................. 3.4" H x 8.4" W x 6.25" D

8.5 cm H x 21 cm W x 16 cm D

(Depth excludes connectors.)

Shipping weight ........................... 5 lbs (2.3 kg)

Vibration ....................................... ISTA/NSTA 1A in carton (International Safe Transit Association)

Approvals ..................................... UL, CUL, CE

MTBF ............................................. 30,000 hours

Warranty ....................................... 2 years parts and labor

1-2 SW2 AR

Specifications are subject to change without notice.

xixi

xi and SW4 AR

xixi

xixi

xi Switchers • Specifications

xixi

(7.2-052101-D3)