Extron electronic SW 2 AR MX User Manual

Specifications — SW 2/4/6 AR MX Switchers

Video

Gain ............................................... Unity

Bandwidth .................................... 600 MHz (-3dB), fully loaded

Crosstalk ....................................... -70dB @ 10 MHz

Video input

Number/signal type ................... 2, 4, or 6 analog VGA-UXGA RGBS, RGsB, RsGsBs, component video, S-video or

NTSC/PAL/SECAM composite video

Connectors .................................... 2, 4, or 6 x 4 BNC female

Impedance .................................... 75 ohms

Horizontal frequency .................. 15 kHz to 145 kHz

Vertical frequency ....................... 30 Hz to 170 Hz

Return loss .................................... -30dB @ 10 MHz

External sync (genlock)............... SW 4 and 6 AR MX only ........ 0.3V to 0.4V p-p

Video output

Number/signal type ................... 1 analog VGA-UXGA RGBS, RGsB, RsGsBs, component video, S-video or

NTSC/PAL/SECAM composite video

Connectors .................................... 4 BNC female

Minimum/maximum levels ...... Analog ....... -5.0V to +5.0V p-p

Impedance .................................... 75 ohms

Return loss .................................... -30dB @ 5 MHz

DC offset ....................................... ±5mV maximum

Sync

Input type ..................................... 2, 4, or 6 analog RGBS, RGsB, RsGsBs

Output type .................................. 1 analog RGBS, RGsB, RsGsBs

Standards ...................................... NTSC, PAL, SECAM

Input level ..................................... 0.5V to 5V p-p

Output level.................................. Same as input

Input impedance.......................... 510 ohms

Output impedance ...................... 75 ohms

Max. propagation delay.............. 40 ns

Max. rise/fall time ....................... 4 ns

Polarity .......................................... Positive or negative

Control/remote — switcher

Serial control port ........................ RS-232, 9-pin D female connector

Baud rate and protocol ............... 9600, 8-bit, 1 stop bit, no parity

Serial control pin configurations .... 2 = TX, 3 = RX, 5 = GND

Contact closure ............................ 25-pin D female connector

Extron remote key pad control .. Extron KP 10 keypad.............. connects to the 25-pin D female connector

IR controller module ................... Extron IR 101 ........................... connects to the RS-232 9-pin D female connector

Program control ........................... Extron’s control program for Windows®

Extron’s Simple Instruction Set

™ – SIS™

General

Power............................................. 100VAC to 240VAC, 50/60 Hz, 10 watts, internal, auto-switchable

Temperature/humidity .............. Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, non-condensing

Operating +32° to +122°F (0° to +50°C) / 10% to 90%, non-condensing

Rack mount................................... Yes, with optional 2U front panel #60-141-01 or 2U universal rack shelf #60-032-01

Enclosure type.............................. Metal

1-2 SW 2 AR MX, SW 4 AR MX, and SW 6 AR MX Switchers • Specifications

Enclosure dimensions ................. 3.4" H x 8.5" W x 6.25" D (2U high, 1/2 rack width)

8.5 cm H x 21.6 cm Wx 15.9 cm D
(Depth excludes connectors.)

Product weight

SW 2 AR MX ..................... 3.7 lbs (1.7 kg)

SW 4 AR MX ..................... 3.9 lbs (1.8 kg)

SW 6 AR MX ..................... 4.4 lbs (2.0 kg)

Shipping weight ........................... 6 lbs (2.7 kg)

Vibration ....................................... ISTA/NSTA 1A in carton (International Safe Transit Association)

Listings .......................................... UL, CUL

Certifications ................................ CE, CSA

MTBF ............................................. 30,000 hours

Warranty ....................................... 3 years parts and labor

Specifications are subject to change without notice.

(7.31-030602-D1)

1-3SW 2 AR MX, SW 4 AR MX, and SW 6 AR MX Switchers • Specifications