Extron electronic PS 1210P, PS 910, PS 1508, PS 1508C, PS 1210 User Manual
Extron External Power Supply •
b
a
Tie Wrap
to Pole
Installation Guide
Important Safety Instructions
This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment.
This symbol is intended to alert the user of the
presence of uninsulated dangerous voltage within
the product enclosure that may present a risk of
electric shock. On the product, risk of shock may
be indicated by this symbol.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from
the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this device apparatus during lightning storms or when
unused for long periods of time.
About the Extron PS 910, PS 1210, PS 1508 Power Supplies
Model Overview
Model Power Output Termination
PS 910C 9 watts, 9 VDC, 1 A Captive screw
PS 910P 9 watts, 9 VDC, 1 A DC plug
PS 1210C 12 watts, 12 VDC, 1 A Captive screw
PS 1210P 12 watts, 12 VDC, 1 A DC plug
PS 1508C 12 watts, 15 VDC, 0.8 A Captive screw
ZipClip™ 100
(101-002-01)
Cabling and Features
Features
AC
Power
Input
1A MAX
100-240V 50-60Hz
DC Power
Connector Pin Assignments
PS 910C, PS 1210C, PS 1508C
Power Supply
Output Cord
Alternative Wiring Option
Power Supply
Output Cord
Output
Smooth
Ridged
Smooth
N/C
Ridged
— —
Tie Wrap
WARNING: To reduce the risk of fire or electric shock, do not
expose this apparatus to rain or moisture.
This apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases shall be
placed on the apparatus.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as
when the power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
WARNING: This apparatus is a Class I product. This product
must be connected to a MAINS socket outlet with a
protective earthing connection.
The mains plug is used as the disconnect device and shall remain
readily operable.
To prevent the risk of shock, do not attempt to service this
equipment yourself because opening or removing covers may
expose you to dangerous voltage or other hazards.
WARNING:
Power sources • This equipment should be operated only from
the power source indicated on the product. This equipment
is intended to be used with a main power system with a
grounded (neutral) conductor. The third (grounding) pin is
a safety feature, do not attempt to bypass or disable it.
Power disconnection • To remove power from the equipment
safely, remove all power cords from the rear of the
equipment, or the desktop power module (if detachable), or
from the power source receptacle (wall plug).
Notches for
Securing
Tie Wrap
Power
LED
ZipClip
Mounting Slot
(front and rear)
PS 910P, PS 1210P
Tip (+)
Captive Screw
Connector
Sleeve (-)
2. Fasten the power output cord to the ZipClip base.
a. Insert tie wraps (“zip ties”) along the notches on the side of the
power supply and
through the tie wrap
anchor points on the
ZipClip, then around
the cord.
b. Connect and pull the
tie wraps until they
Tie Wrap
are secure. Do not
over tighten.
Mounting
CAUTION: These power supplies are not suitable for use in air handling
spaces or in wall cavities. The power supply is to be located within
the vicinity of the Extron AV equipment in an ordinary location
with IEC 1010 pollution degree 2, and secured to an equipment rack
within a dedicated closet, podium, or desk.
The installation must be in accordance with the applicable provisions
of National Electrical Code ANSI/NFPA 70, article 75 and Canadian
Electrical Code part 1, section 16. The power supply shall not be
permanently fixed to building or similar structure.
Rack Mounting
Mounting to a Rack Shelf
These power supplies are one eighth rack wide. Up to eight power supplies
can be mounted side by side directly onto a rack shelf.
1. Align the threaded holes in the bottom of the power supply with the
holes in an Extron rack
shelf and fasten the
supply to the shelf
with two 4-40 x 3/16"
screws as shown
below.
b
RSB 123
Rack Shelf
a
(2) 4-40 x 3/16"
Screws
2. Bolt the rack shelf to the rack.
Mounting to Rack Rails Using a ZipClip
1. Fasten the ZipClip 100
mounting clip to a
rack rail using
two rack
screws as
shown in the
diagram at
right.
Side of Rack
2. Insert the
power supply
into the ZipClip as
described previously
and press to snap it
into place.
Cable
Strain
Relief
ZipClip 100
Back of
Rack
Using the ZipClip 100
Attaching and Removing the Clip and Power Supply
To attach the power supply to the ZipClip 100 mounting clip:
1. Insert the bottom of the power supply down into the clip,
starting with one end.
2. Pivot the other end down and press until the clip snaps into place.
To remove the power supply from the ZipClip:
1. Press the tab on the ZipClip.
2. Pivot the power supply and lift it out
of the ZipClip.
Using Tie Wraps for Cable Strain Relief
1. Attach the power supply to the ZipClip mounting clip as described
previously.
Inside
Rack
Pole or Table Leg Mounting
1. Wrap a tie wrap around
the projector mount pole or table
leg and the power supply at one of
the tie wrap notches, and fasten the
tie wrap together to secure the
power supply to the pole or table
leg.
2. Repeat step 1 at the other tie wrap
notch.
See the next page for
furniture mounting instructions.
1
External Power Supply • Installation Guide (continued)
Furniture Mounting
NOTE: The ZipClip is shipped with a set of four wood screws.
1. Attach the ZipClip to the furniture using two or more wood screws as
shown below. Make sure the clip is oriented with the appropriate side
facing the mounting surface
and with the tab accessible
from the front of the
furniture.
2. Insert the
power supply
into the ZipClip
as described
previously and
press to snap it
into place.
a
Ta b
Under a Desk
b
Specifications
Power output
PS 910 Series ........................ 9 VDC, 1 A, 9 watts
PS 1210 Series ...................... 12 VDC, 1 A, 12 watts
PS 1508 Series ...................... 15 VDC, 0.8 A, 12 watts
Power input ................................. 100 VAC to 240 VAC, 50-60 Hz
No load ................................ 0.3 watts
Full power
PS 910 Series ................... 11.2 watts, 0.3 A maximum
PS 1210 Series ................. 14.6 watts, 0.3 A maximum
PS 1508 Series ................. 14.8 watts, 0.3 A maximum
Temperature/humidity .................. Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%,
noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%,
noncondensing
Cooling........................................ Convection, no vents
Mounting
Rack mount ................................. Yes, with optional 1U rack shelf, with the included ZipClip™ 100
mounting clip or by securing to rack rails with tie wraps
Furniture mount ................... Yes, with the included ZipClip 100 mounting clip
Pole mount ........................... Yes, using tie wraps
Enclosure type ............................. High impact, high temperature plastic
Enclosure dimensions ................... 1.7” H x 2.2” W x 4.5” D (1U high, one eighth rack wide)
(4.2 cm H x 5.5 cm W x 11.4 cm D)
(Excludes power cords.)
Product weight ............................ 0.5 lb (0.3 kg)
Shipping weight........................... 2 lbs (1 kg)
Vibration ..................................... Operating: 10-250 Hz, 0.25 Gp-p, 3 axes, 15 min. sweep
Regulatory compliance
Safety, EMI/EMC ................... BSMI, CCC, CE, C-tick, c-UL, CISPR 22 Class B, CISPR 24,
FCC Class B, GS, KC, NEC Class 2, PSE, S-mark, UL
Environmental ...................... Complies with the appropriate requirements of CEC, EU code
of conduct, Korea Energy Certification, Australia Energy Safe
Certification, RoHS, WEEE.
These power supplies meet energy efficiency level V
and are marked with the UL Environment Energy Efficiency
Certification (EEC) Mark.
MTBF ........................................... 1,000,000 hours
Warranty ..................................... 3 years parts and labor
Safety Instructions • English
This symbol is intended to alert the user of
important operating and maintenance (servicing)
instructions in the literature provided with the
equipment.
This symbol is intended to alert the user of the
presence of uninsulated dangerous voltage
within the product enclosure that may present a
risk of electric shock.
Cautions and General Guidelines
Read instructions • Read and understand all safety and operating
instructions before using the equipment.
Retain instructions • The safety instructions should be kept for future
reference.
Follow warnings • Follow all warnings and instructions marked on
the equipment or in the user information.
Avoid attachments • Do not use tools or attachments that are not
recommended by the equipment manufacturer because they
may be hazardous.
Avoid water • Do not use this or other electrical equipment near
water. Clean the device with a dry cloth only.
Warnings
Power and electrical safety
WARNING: To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture. This
device shall not be exposed to dripping or splashing,
and no objects filled with liquids, such as vases, shall be
placed on this device.
Power sources • This equipment should be operated only from the
power source indicated on the product. This equipment is
intended to be used with a main power system with a grounded
(neutral) conductor. The third (grounding) pin is a safety
feature, do not attempt to bypass or disable it.
WARNING: The PS 1220EB is a Class I product, which must
be connected only to a mains socket outlet with a
protective earthing (grounding) connection.
Power disconnection • To remove power from the equipment safely,
remove all power cords from the rear of the equipment, or
the desktop power module (if detachable), or from the power
source receptacle (wall plug).
Power plug as a disconnection device • The mains plug is used as the
disconnect device and shall remain readily operable. In other
words, it the power plug must be accessible and easy to unplug
from the power source.
When to unplug the unit • Unplug this device during lightning
storms or when it will be unused for long periods. Unplug the
device before servicing.
Power cord protection • Power cords should be routed so that they
are not likely to be stepped on or pinched by items placed
upon or against them. Protect the cord particularly at plugs,
convenience receptacles, and the points where they exit the
devices.
Polarized and grounding plugs • Do not defeat the safety purpose of
the polarized or grounding type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician to
replace the obsolete outlet with a safer one.
Servicing • Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged
in any way, such as when the power-supply cord or plug is
damaged, liquid has been spilled into or objects have fallen
into the device, or when the device has been exposed to rain
or moisture, does not operate normally, or has been dropped.
To prevent the risk of shock, do not attempt to service this
equipment yourself because opening or removing covers may
expose you to dangerous voltage or other hazards.
Ventilation, mounting, and temperature
Ventilation slots and openings • If the equipment has slots or holes
in the enclosure, these are provided to prevent overheating
of sensitive components inside. Do not block any ventilation
opening, as this may cause the product to malfunction. Install
the device in accordance with the manufacturer’s instructions.
Temperature • Do not install electronic devices near any heat sources
such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
© 2012 Extron Electronics — All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com
Consignes de Sécurité •
Français
Ce symbole sert à avertir l’utilisateur que la
documentation fournie avec le matériel contient
des instructions importantes concernant
l’exploitation et la maintenance (réparation).
Ce symbole sert à avertir l’utilisateur de la
présence dans le boîtier de l’appareil de tensions
dangereuses non isolées posant des risques
d’électrocution.
Attention
Lire les instructions• Prendre connaissance de toutes les consignes de
sécurité et d’exploitation avant d’utiliser le matériel.
Conserver les instructions• Ranger les consignes de sécurité afin de
pouvoir les consulter à l’avenir.
Respecter les avertissements • Observer tous les avertissements
et consignes marqués sur le matériel ou présentés dans la
documentation utilisateur.
Eviter les pièces de fixation • Ne pas utiliser de pièces de fixation ni
d’outils non recommandés par le fabricant du matériel car cela
risquerait de poser certains dangers.
Avertissement
Alimentations • Ne faire fonctionner ce matériel qu’avec la source
d’alimentation indiquée sur l’appareil. Ce matériel doit être
utilisé avec une alimentation principale comportant un fil de
terre (neutre). Le troisième contact (de mise à la terre) constitue
un dispositif de sécurité : n’essayez pas de la contourner ni de
la désactiver.
Déconnexion de l’alimentation• Pour mettre le matériel hors tension
sans danger, déconnectez tous les cordons d’alimentation de
l’arrière de l’appareil ou du module d’alimentation de bureau
(s’il est amovible) ou encore de la prise secteur.
Protection du cordon d’alimentation • Acheminer les cordons
d’alimentation de manière à ce que personne ne risque de marcher dessus et à ce
qu’ils ne soient pas écrasés ou pincés par des objets.
Réparation-maintenance • Faire exécuter toutes les interventions
de réparation-maintenance par un technicien qualifié. Aucun
des éléments internes ne peut être réparé par l’utilisateur. Afin
d’éviter tout danger d’électrocution, l’utilisateur ne doit pas
essayer de procéder lui-même à ces opérations car l’ouverture
ou le retrait des couvercles risquent de l’exposer à de hautes
tensions et autres dangers.
Fentes et orifices • Si le boîtier de l’appareil comporte des fentes ou
des orifices, ceux-ci servent à empêcher les composants internes
sensibles de surchauffer. Ces ouvertures ne doivent jamais être
bloquées par des objets.
安全须知 • 中文
这个符号提示用户该设备用户手册中有重要的
操作和维护 说明。
这个符号警告用户该设备机 壳内有暴露的危险
电 压 ，有 触 电 危 险 。
注意
阅读说明书 • 用户使用该设备前必须阅读并理解 所有安全和
使用说明。
保存说明书 • 用 户应保存安全说明书以备将来使用。
遵守警告 • 用户应 遵守产品和用户 指南上的所有安全和 操
作说明。
避免追加 • 不要使用该产品厂商没有推荐的工具或追加设
备 ，以 避 免 危 险 。
警告
电源 • 该设备只能使用产品上标明的电源。 设 备必须使用有
地线的供电系统供电。 第三条线（地线）是安全设施，不
能不用或跳过 。
拔掉电源 • 为安 全地从设备拔掉电源，请拔掉所有设备后或
桌面电源的电源线，或任何接到市电系统的电源线。
电源线保护 • 妥善布线， 避免被 踩踏，或重物挤 压。
维护 • 所有维修必须由认证的维修人员进行。 设备内部没有
用户可以更换的零件。为避免出现触电危险不要自己试图
打开设备盖子维修该设备。
通风孔 • 有 些 设 备 机 壳 上 有 通 风 槽 或 孔 ，它 们 是 用 来 防 止 机
内敏感元件过热。 不 要用任何东西挡住 通风孔。
NOTE: Specifications are subject to change without notice.
8.0-041612-D12
Sicherheitsanleitungen •
Deutsch
Dieses Symbol soll dem Benutzer in der im
Lieferumfang enthaltenen Dokumentation
besonders wichtige Hinweise zur Bedienung und
Wartung (Instandhaltung) geben.
Dieses Symbol soll den Benutzer darauf aufmerksam
machen, daß im Inneren des Gehäuses dieses
Produktes gefährliche Spannungen, die nicht
isoliert sind und die einen elektrischen Schock
verursachen können, herrschen.
Achtung
Lesen der Anleitungen • Bevor Sie das Gerät zum ersten
Mal verwenden, sollten Sie alle Sicherheits-und
Bedienungsanleitungen genau durchlesen und verstehen.
Aufbewahren der Anleitungen • Die Hinweise zur elektrischen
Sicherheit des Produktes sollten Sie aufbewahren, damit Sie im
Bedarfsfall darauf zurückgreifen können.
Befolgen der Warnhinweise • Befolgen Sie alle Warnhinweise
und Anleitungen auf dem Gerät oder in der
Benutzerdokumentation.
Keine Zusatzgeräte • Verwenden Sie keine Werkzeuge oder
Zusatzgeräte, die nicht ausdrücklich vom Hersteller empfohlen
wurden, da diese eine Gefahrenquelle darstellen können.
Vorsicht
Stromquellen • Dieses Gerät sollte nur über die auf dem Produkt
angegebene Stromquelle betrieben werden. Dieses Gerät wurde
für eine Verwendung mit einer Hauptstromleitung mit einem
geerdeten (neutralen) Leiter konzipiert. Der dritte Kontakt ist
für einen Erdanschluß, und stellt eine Sicherheitsfunktion dar.
Diese sollte nicht umgangen oder außer Betrieb gesetzt werden.
Stromunterbrechung • Um das Gerät auf sichere Weise vom Netz zu
trennen, sollten Sie alle Netzkabel aus der Rückseite des Gerätes,
aus der externen Stomversorgung (falls dies möglich ist) oder
aus der Wandsteckdose ziehen.
Schutz des Netzkabels • Netzkabel sollten stets so verlegt werden, daß
sie nicht im Weg liegen und niemand darauf treten kann oder
Objekte darauf- oder unmittelbar dagegengestellt werden können.
Wartung • Alle Wartungsmaßnahmen sollten nur von qualifiziertem
Servicepersonal durchgeführt werden. Die internen Komponenten
des Gerätes sind wartungsfrei. Zur Vermeidung eines
elektrischen Schocks versuchen Sie in keinem Fall, dieses Gerät
selbst öffnen, da beim Entfernen der Abdeckungen die Gefahr
eines elektrischen Schlags und/oder andere Gefahren bestehen.
Schlitze und Öffnungen • Wenn das Gerät Schlitze oder Löcher
im Gehäuse aufweist, dienen diese zur Vermeidung einer
Überhitzung der empfindlichen Teile im Inneren. Diese Öffnungen
dürfen niemals von anderen Objekten blockiert werden.
Instrucciones de seguridad •
Español
Este símbolo se utiliza para advertir al usuario
sobre instrucciones importantes de operación
y mantenimiento (o cambio de partes) que
se desean destacar en el contenido de la
documentación suministrada con los equipos.
Este símbolo se utiliza para advertir al usuario
sobre la presencia de elementos con voltaje
peligroso sin protección aislante, que puedan
encontrarse dentro de la caja o alojamiento del
producto, y que puedan representar riesgo de
electrocución.
Precaucion
Leer las instrucciones • Leer y analizar todas las instrucciones de
operación y seguridad, antes de usar el equipo.
Conservar las instrucciones • Conservar las instrucciones de
seguridad para futura consulta.
Obedecer las advertencias • Todas las advertencias e instrucciones
marcadas en el equipo o en la documentación del usuario,
deben ser obedecidas.
Evitar el uso de accesorios • No usar herramientas o accesorios que
no sean especificamente recomendados por el fabricante, ya que
podrian implicar riesgos.
Advertencia
Alimentación eléctrica • Este equipo debe conectarse únicamente a
la fuente/tipo de alimentación eléctrica indicada en el mismo.
La alimentación eléctrica de este equipo debe provenir de un
sistema de distribución general con conductor neutro a tierra.
La tercera pata (puesta a tierra) es una medida de seguridad, no
puentearia ni eliminaria.
Desconexión de alimentación eléctrica • Para desconectar con
seguridad la acometida de alimentación eléctrica al equipo,
desenchufar todos los cables de alimentación en el panel trasero
del equipo, o desenchufar el módulo de alimentación (si fuera
independiente), o desenchufar el cable del receptáculo de la
pared.
Protección del cables de alimentación • Los cables de alimentación
eléctrica se deben instalar en lugares donde no sean pisados ni
apretados por objetos que se puedan apoyar sobre ellos.
Reparaciones/mantenimiento • Solicitar siempre los servicios técnicos
de personal calificado. En el interior no hay partes a las que
el usuario deba acceder. Para evitar riesgo de electrocución,
no intentar personalmente la reparación/mantenimiento de
este equipo, ya que al abrir o extraer las tapas puede quedar
expuesto a voltajes peligrosos u otros riesgos.
Ranuras y aberturas • Si el equipo posee ranuras o orificios en su
caja/alojamiento, es para evitar el sobrecalientamiento de
componentes internos sensibles. Estas aberturas nunca se deben
obstruir con otros objetos.
FCC Class B Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
z Reorient or relocate the receiving antenna.
z Increase the separation between the equipment and receiver.
z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
z Consult the dealer or an experienced radio/TV technician for help.
NOTE: This unit was tested with shielded cables on the
peripheral devices. Shielded cables must be used with
the unit to ensure compliance.
For more information on safety guidelines, regulatory
compliances, EMI/EMF compliance, accessibility, and
related topics, click here.
Extron Headquarters
+1.800.633.9876
(Inside USA/Canada Only)
Extron USA - West Extron USA - East
+1.714.491.1500 +1.919.850.1000
FAX:
+1.714.491.1517 +1.919.850.1001
Extron Europe
+800.3987.6673
(Inside Europe Only)
+31.33.453.4040
FAX:
+31.33.453.4050
Extron Asia
+800.7339.8766
(Inside Asia Only)
+65.6383.4400
FAX:
+65.6383.4664
Extron Japan
+81.3.3511.7655
FAX:
+81.3.3511.7656
Extron Middle East
+971.4.2991800
FAX:
+971.4.2991880
Extron China
+4000.EXTRON
+4000.398766
(Inside China Only)
+86.21.3760.1568
FAX:
+86.21.3760.1566
68-1575-01
Rev. B
04 12
Extron India
1800.3070.3777
(Inside India Only)
+91.80.3055.3777
FAX: +91.80.3055.3737
Extron Korea
+82.2.3444.1571
FAX:
+82.2.3444.1575
2
Loading...