Specifications — ISS 506 Series
Video input
Number/signal type ..................... 4 RGBHV, RGBS, RGsB, component video (interlaced or progressive),
S-video, composite video
1 component video (interlaced), S-video, composite video
1 S-video, composite video, or optional digital component video (SDI or
HDSDI)
Connectors ..................................... 4 x 5 female BNC
1 x 3 female BNC, 1 female 4-pin mini DIN
1 optional BNC for SDI/HDSDI
Nominal level ................................ 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ........ Analog: 0.0 V to 2.0 Vp-p with no offset at unity gain
Impedance ...................................... 75 ohms
Horizontal frequency .................... Autoscan 15 kHz to 100 kHz
Vertical frequency .......................... Autoscan 50 Hz to 120 Hz
Resolution range ........................... Autoscan 640x480 to 1600x1200
Return loss ...................................... -30 dB @ 5 MHz
DC offset (max. allowable)........... 0.5 V
Video processing
Encoder (for scan converted output)
10 bit digital
Digital sampling (for program and preview outputs)
24 bit, 8 bits per color; 162 MHz standard
Colors (for program and preview outputs)
16.78 million
Horizontal filtering (for scan converted output)
3 levels
Vertical filtering (for scan converted output)
3 levels
Encoder filtering (for scan converted output)
3 levels
Video output
Number/signal type ..................... 2 scaled RGBHV, RGBS, RGsB, HD YUV component video program outputs
1 scaled RGBHV, RGBS, RGsB, HD YUV component video preview output
1 optional DVI, HDSDI (SMPTE 292 M), or scan converted output (interlaced
component video, S-video, composite video)
Connectors ..................................... (2) 15-pin HD (1 for preview output, 1 for program output)
5 BNC female (for program output)
Nominal level ................................ 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ........ 0.0 V to 0.7 Vp-p (RGB)
0.0 V to 1.0 Vp-p (component video, G of RGsB)
Impedance ...................................... 75 ohms
Scaled resolution ........................... 640x480
1024x852
1365x768
1864x1050
1
Hz; 8 = 25 Hz; 9 = 30 Hz; 10 = 59.94 Hz;
Return loss ...................................... -30 dB @ 5 MHz
DC offset ......................................... ±25 mV with input at 0 offset (except for RGsB and component video)
Switching type ............................... Seamless switching (cut or dissolve)
1,2,3,4,5,6
, 800x600
1,2,3,4
,1024x1024
1,2,3
, 1365x1024
1,2
, HDTV 480p
1,2,3,4,5,6
, 852x480
1,2,3
, 1280x768
1,2
, 1366x768
2,10
, 576p
1,2,3,4,5
1,2,3,4
1,2,3
, 1400x1050
1,5
, 720p
, 1024x768
, 1280x1024
1,2,8,9,10
1,2
, 1080p
1,2,3,4
,
1,2,3
, 1360x765
, 1600x1200
1,2,7,8,9,10
, and 1080i
1,2,3
,
1,2
,
= at 50 Hz ; 2 = at 60 Hz; 3 = at 72 Hz ; 4 = 96 Hz; 5 = 100 Hz; 6 = 120 Hz; 7 = 24
1,2,10
Extron ISS 506 Series Seamless Switchers • Specications
1
Specifications — ISS 506 Series, cont’d
Sync
Input type ....................................... Autodetect RGBHV, RGBS, RGsB
Output type .................................... RGBHV, RGBS, RGsB
Tri-level on Y, R-Y, B-Y channels of component video or bi-level on Y channel
of component video (selectable)
Standards ........................................ NTSC 3.58, NTSC 4.43, PAL, SECAM
Optional SDI/HDSDI input: SMPTE 259M-C, SMPTE 292M
Input level ...................................... 0.0 V to 5.0 Vp-p
0.0 V to 0.6 Vp-p for component video with tri-level sync
Output level ................................... TTL: 5.0 V p-p, unterminated
Input impedance ........................... 510 ohms
Output impedance ........................ 75 ohms
Max. input voltage ........................ 5.0 Vp-p
Polarity............................................ Positive or negative (selectable)
Audio
Gain ................................................. Unbalanced output: -6 dB; balanced output: 0 dB
Frequency response ...................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise .................................. 0.05% @ 1 kHz at +4 dBu and 0 dB gain
S/N .................................................. >83 dB (typical) at maximum output (unweighted)
Crosstalk ......................................... <-80 dB @ 1 kHz, fully loaded
Stereo channel separation ............ >90 dB @ 1 kHz
CMRR .............................................. >75 dB @ 1 kHz
Audio input
Number/signal type ..................... 6 stereo, balanced/unbalanced
Connectors ..................................... (6) 3.5 mm captive screw connectors, 5 pole
Impedance ...................................... >10k ohms unbalanced/balanced, DC coupled
Nominal level ................................ +4 dBu (1.23 Vrms), -10 dBV (316 mVrms)
Maximum level .............................. +19.5 dBu, (balanced or unbalanced) at 1% THD+N
Input gain adjustment .................. –18 dB to +24 dB
Audio delay compensation (automatic)
20 ms when scaling RGB computer video or HDTV component video
75 ms when scaling NTSC component video, S-video, or composite video
90 ms when scaling PAL component video, S-video, or composite video
N
Audio output
Number/signal type ..................... 3 stereo, balanced/unbalanced (2 program, 1 preview)
Connectors ..................................... (3) 3.5 mm captive screw connector, 5 pole
Impedance ...................................... 50 ohms unbalanced, 100 ohms balanced
Gain error ....................................... ±0.5 dB channel to channel
Maximum level (Hi-Z) ................. >+21 dBu, balanced or unbalanced at 1% THD+N
Maximum level (600 ohm) ........... >+15 dBm, balanced or unbalanced at 1% THD+N
Control/remote — switcher
Serial control ports ........................ 1 RS-232/RS-422: 1 rear panel 9-pin female D connector
Baud rate and protocol ................. 9600 (default), 19200, 38400, 115200 baud; 8 data bits; 1 stop bit; no parity
2
Extron ISS 506 Series Seamless Switchers • Specications
0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
1 RS-232: 1 front panel 2.5 mm mini stereo jack