Extron electronic DTP HD DA8 4K 230-330, DTP HD DA4 4K 230-330 User Manual
User Guide
DTP HD DA4 4K 230/330
DTP HD DA8 4K 230/330
DTP HDMI Distribution Amplifiers
Video Products
68-2545-01 Rev. A
02 15
Safety Instructions
Safety Instructions • English
WARNING: This symbol, , when used on the product, is intended to
alert the user of the presence of uninsulated dangerous voltage within the
product’s enclosure that may present a risk of electric shock.
ATTENTION: This symbol, , when used on the product, is intended
to alert the user of important operating and maintenance (servicing)
instructions in the literature provided with the equipment.
For information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the Extron Safety and
Regulatory Compliance Guide, part number 68-290-01, on the Extron website,
www.extron.com.
Instructions de sécurité • Français
AVERTISSEMENT: Ce pictogramme, , lorsqu’il est utilisé sur le
produit, signale à l’utilisateur la présence à l’intérieur du boîtier du produit
d’une tension électrique dangereuse susceptible de provoquer un choc
électrique.
ATTENTION: Ce pictogramme, , lorsqu’il est utilisé sur le produit, signale
à l’utilisateur des instructions d’utilisation ou de maintenance importantes
qui se trouvent dans la documentation fournie avec le matériel.
Pour en savoir plus sur les règles de sécurité, la conformité à la réglementation,
la compatibilité EMI/EMF, l’accessibilité, et autres sujets connexes, lisez les
informations de sécurité et de conformité Extron, réf. 68-290-01, sur le site
Extron, www.extron.com.
Sicherheitsanweisungen • Deutsch
WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer darauf
aufmerksam machen, dass im Inneren des Gehäuses dieses Produktes
gefährliche Spannungen herrschen, die nicht isoliert sind und die einen
elektrischen Schlag verursachen können.
VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in der
im Lieferumfang enthaltenen Dokumentation besonders wichtige Hinweise
zur Bedienung und Wartung (Instandhaltung) geben.
Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung,
EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in
den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer
68-290-01) auf der Extron-Website, www.extron.com.
Instrucciones de seguridad • Español
ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,
avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del
producto, lo que puede representar un riesgo de descarga eléctrica.
ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa
al usuario de la presencia de importantes instrucciones de uso y
mantenimiento recogidas en la documentación proporcionada con el
equipo.
Para obtener información sobre directrices de seguridad, cumplimiento
de normativas, compatibilidad electromagnética, accesibilidad y temas
relacionados, consulte la Guía de cumplimiento de normativas y seguridad de
Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.
Инструкция по технике безопасности • Русский
ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан
на продукте, предупреждает пользователя о наличии
неизолированного опасного напряжения внутри корпуса
продукта, которое может привести к поражению электрическим
током.
ВНИМАНИЕ: Данный символ, , если указан на продукте,
предупреждает пользователя о наличии важных инструкций
по эксплуатации и обслуживанию в руководстве,
прилагаемом к данному оборудованию.
Для получения информации о правилах техники безопасности,
соблюдении нормативных требований, электромагнитной
совместимости (ЭМП/ЭДС), возможности доступа и других
вопросах см. руководство по безопасности и соблюдению
нормативных требований Extron на сайте Extron: www.extron.com,
номер по каталогу - 68-290-01.
Chinese Simplified（简体中文）
警告： 产品上的这个标志意在警告用户该产品机壳内有暴露的危险 电压，
有触电危险。
注意： 产品上的这个标志意在提示用户设备随附的用户手册中有
重要的操作和维护(维修）说明。
关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍
使用的特性等相关内容，敬请访问 Extron 网站 www.extron.com，参见
Extron 安全规范指南，产品编号 68-290-01。
Chinese Traditional（ )
警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著
可能會導致觸電之風險的未絕緣危險電壓。
注意 若產品上使用此符號，是為了提醒使用者。
有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳
細資訊，請瀏覽 Extron 網站：www.extron.com，然後參閱《Extron 安全性與
法規遵守手冊》，準則編號 68-290-01。
Japanese
警告: この記号 が製 品上に表示 されてい る場合は、筐 体内に 絶縁 されて
いない高電圧が流れ、感電の危険があることを示しています。
注意: この記号 が製品上に表示されている場合は、本機の取扱説明書
に 記載さ れて いる重 要な操 作 と保 守 ( 整 備)の 指 示につ いてユーザ ー の 注
意を喚起するものです。
安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目に
つ い て は 、エ ク スト ロ ン の ウェブ サ イト www.extron.com よ り 『 Extron Safety
and Regulatory Compliance Guide』 ( P/N 68-290-01) をご覧ください。
Korean
경고: 이 기호 가 제품에 사용될 경우, 제품의 인클로저 내에 있는
접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을
경고합니다.
주의: 이 기호 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와
있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.
안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에
대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및
규제 준수 안내서, 68-290-01 조항을 참조하십시오.
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part15 of the FCC rules. The ClassA limits provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause interference. This interference must be corrected at
the expense of the user.
ATTENTION: The Twisted Pair Extension technology works with shielded twisted pair
(STP) cables only. To ensure FCC Class A and CE compliance, STP cables and STP
Connectors are also required.
For more information on safety guidelines, regulatory compliances, EMI/EMF
compatibility, accessibility, and related topics, see the “Extron Safety and
Regulatory Compliance Guide” on the Extron website.
Copyright
© 2015 Extron Electronics. All rights reserved.
Trademarks
All trademarks mentioned in this guide are the properties of their respective owners.
The following registered trademarks®, registered service marks
(SM)
, and trademarks
(TM)
are the property of
RGBSystems, Inc. or Extron Electronics:
Registered Trademarks
AVTrac, Cable Cubby, CrossPoint, eBUS, EDID Manager, EDID Minder, Extron, Flat Field, GlobalViewer, Hideaway, Inline, IPIntercom, IPLink, KeyMinder,
LockIt, MediaLink, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, SoundField, SpeedMount, SpeedSwitch, SystemINTEGRATOR, TeamWork,
TouchLink, V-Lock, VersaTools, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP, and XTP Systems
Registered Service Mark
AAP, AFL (Accu-RateFrameLock), ADSP(Advanced Digital Sync Processing), Auto-Image, CableCover, DRS(ClassDRippleSuppression), DDSP (Digital
Display Sync Processing), DMI (DynamicMotionInterpolation), DriverConfigurator, DSPConfigurator, DSVP(Digital Sync Validation Processing), EQIP,
FastBite, FlexOS, FOXBOX, Global Configurator, IP Intercom HelpDesk, LinkLicense, MAAP, MicroDigital, ProDSP, QS-FPC(QuickSwitch Front Panel
Controller), Scope-Trigger, SIS, Simple Instruction Set, Skew-Free, SpeedNav, Triple-Action Switching, XTRA, ZipCaddy, ZipClip
(SM)
: S3 Service Support Solutions
Trademarks (™
(®)
)
Conventions Used in this Guide
Notifications
The following notifications are used in this guide:
ATTENTION:
• Risk of property damage.
• Risque de dommages matériels.
NOTE: A note draws attention to important information.
TIP: A tip provides a suggestion to make working with the application easier.
Software Commands
Commands are written in the fonts shown here:
^AR Merge Scene,,Op1 scene 1,1 ^B 51 ^W^C
[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]
E X! *X1&* X2)* X2#* X2! CE}
NOTE: For commands and examples of computer or device responses mentioned
in this guide, the character “0” is used for the number zero and “O” is the capital
letter “o.”
Computer responses and directory paths that do not have variables are written in the font
shown here:
Reply from 208.132.180.48: bytes=32 times=2ms TTL=32
C:\Program Files\Extron
Variables are written in slanted form as shown here:
ping xxx.xxx.xxx.xxx —t
SOH R Data STX Command ETB ETX
Selectable items, such as menu names, menu options, buttons, tabs, and field names are
written in the font shown here:
From the File menu, select New.
Click the OK button.
Specifications Availability
Product specifications are available on the Extron website, www.extron.com.
Contents
Introduction............................................................ 1
About the DTP HD DA4/DA8 230/330 ................ 1
Features ............................................................. 1
Application Diagrams .......................................... 3
Installation and Operation .................................. 4
Mounting the Units ............................................. 4
Tabletop Use ...................................................... 4
Mounting Kits ..................................................... 4
UL Rack-Mounting Guidelines ............................ 5
Front Panel Features ........................................... 5
Rear Panel Features ........................................... 6
Connecting the Input Source .............................. 8
Twisted Pair Recommendations for DTP
Communication ................................................. 9
Wiring for RS-232 Control ................................ 10
SIS Commands ................................................... 11
Introduction to SIS ........................................... 11
Host-to-Distribution Amplifier
Communications ......................................... 11
Distribution Amplifier-initiated Messages ....... 11
Copyright Information ................................... 11
Symbols Used in this Guide .............................. 12
Symbol Definitions ........................................ 12
Error Messages ............................................ 13
EDID ............................................................. 14
DTP HD DA4/DA8 EDID Memory Locations ...... 15
Command and Response Table for SIS
Commands ..................................................... 16
Reference Information ...................................... 20
Using the Internal Web Pages ........................... 20
Accessing the Internal Web Pages ................ 20
Setting Up the Device with the Internal Web
Pages .......................................................... 21
Updating the Device Firmware .......................... 22
Downloading Firmware ................................. 22
Downloading and Installing Firmware
Loader ......................................................... 22
Loading Firmware to the DA with Firmware
Loader ......................................................... 23
Loading Firmware to the DA with Internal Web
Pages .......................................................... 25
vExtron DTP HD DA4 4K 230/330 and DTP HD DA8 4K 230/330 • Contents
Introduction
This guide describes the function, installation, and operation of the DTP HD DA4 4K and
DTP HD DA8 4K series of distribution amplifiers. Unless otherwise stated, the terms
“distribution amplifier” or “DA” refer to any of the products in the series.
This section provides the following information:
z About the DTP HD DA4/DA8 4K 230/330
z Features
z Application Diagrams
About the DTP HD DA4/DA8 4K 230/330
These Extron distribution amplifiers distribute one HDMIinput signal to four (DTP HD DA4 4K
230/330) or eight (DTP HD DA8 4K 230/330) simultaneous outputs over shielded twisted pair
(STP) cables. Both models are fully High-bandwidth Digital Content Protection (HDCP) compliant.
These distribution amplifiers support data rates up to 10.2 Gbps (3.4 Gbps per color) with up to
12-bit deep color and use the EDID Minder feature for EDID management.
The automatic output compatibility correction feature scans each output device to ensure that
the output signal is compatible with the color depth and format requirements of the device. Each
output is adjusted independently.
Features
Distributes HDMI plus control and analog audio up to 230 feet (70 meters) or
330 feet (100 meters) over STP cable (depending on the model) — The DTP HD DA
series provides high reliability and maximum performance on an economical and easily
installed cable infrastructure.
Inputs: One HDMI with buffered input loop‑through, one 3.5 mm stereo mini jack
for audio with loop‑through
Outputs: Four (DTP HD DA4 4K 230/330 models) or eight (DTP HD DA8 4K 230/330
models) DTP twisted pair outputs on RJ‑45
Supports computer video up to 2560x1600, HDTV 1080p/60 Deep Color, and 4K
resolutions
DTP outputs are compatible with HDBaseT‑enabled devices — Each DTP output can
be configured to send video and embedded audio, plus bidirectional RS-232 and IR signals
to an HDBaseT-enabled device.
HDMI input loop‑through — The DTP HD DA series features an active local HDMI output
for local monitor support or system expansion.
Audio input with loop‑through accepts additional analog stereo audio signals —
The DTP HD DA series accepts stereo analog audio signals for simultaneous transmission
over the same shielded twisted pair cable, and it includes a loop-through for local audio
system and monitoring needs. Analog audio is not embedded onto the digital video signal,
nor is digital audio de-embedded from the digital video signal.
Extron DTP HD DA4 4K 230/330 and DTP HD DA8 4K 230/330 • Introduction 1
Supports multiple embedded audio formats — The DTP HD DA series is compatible
with a broad range of multi-channel audio signals, providing reliable operation with HDMI
sources.
Remote powering of DTP receivers — The DTP HD DA series can provide power to four
or eight DTP receivers over the twisted pair connections, eliminating the need for separate
power supplies at the remote units.
RS‑232 insertion from the Ethernet control port — System level AV device control to
all remote locations via the distribution amplifier’s Ethernet port, providing comprehensive
control of the attached devices without needing additional equipment.
Bidirectional RS‑232 and IR pass‑through for AV device control — Bidirectional
RS-232 control and IR signals can be transmitted alongside the video signal, allowing
remote AV devices to be controlled without the need for additional cabling.
HDCP compliant
Supported HDMI specification features include data rates up to 10.2 Gbps, Deep
Color up to 12‑bit, 3D, and HD lossless audio formats
Key Minder continuously verifies HDCP compliance — Key Minder authenticates
and maintains continuous HDCP encryption between input and output devices to enable
simultaneous distribution of a single source signal to two or more displays.
EDID Minder automatically manages EDID communication between connected
devices — EDID Minder ensures that the source powers up properly and reliably outputs
content for display.
Supports EDID and HDCP transmission — DDC channels are actively buffered, allowing
continuous communication between source and display.
HDCP authentication and signal presence confirmation — Provides real-time
verification of HDCP status for each digital video input and output. This allows for simple,
quick, and easy signal and HDCP verification through front panel LEDs, RS-232, USB, or
Ethernet, providing valuable feedback to a system operator or helpdesk support staff.
HDCP Visual Confirmation provides a green signal when encrypted content is sent
to a non‑compliant display — A full-screen green signal is sent when HDCP-encrypted
content is transmitted to a non-HDCP compliant display, providing immediate visual
confirmation that protected content cannot be viewed on the display.
HDMI to DVI Interface Format Correction — Automatically enables or disables
embedded audio and InfoFrames, and sets the correct color space for proper connection to
HDMI and DVI displays.
RS‑232 control port — Enables the use of serial commands for integration into a control
system. Extron products use the SIS - Simple Instruction Set command protocol, a set of
basic ASCII commands that allow for quick and easy programming.
RJ‑45 signal and link LED indicators for DTP ports — Provides a means for validating
signal flow and operation, allowing quick identification of connectivity issues.
Compatible with all DTP 230 and DTP 330 Series receivers and DTP‑enabled
products — Enables mixing and matching with desktop and wallplate receivers, as well as
other DTP-enabled products to meet application requirements.
Extron DTP HD DA4 4K 230/330 and DTP HD DA8 4K 230/330 • Introduction 2
Application Diagrams
Combined
Combined
The diagrams below show typical applications for the DTP HD DA4/DA8 230/330.
Laptop Laptop Laptop
VGA
Audio HDMI HDMI HDMI
100-240V ~ --A MAX
50-60 Hz
INPUT
AUDIO
HDMI
100-240V ~ --A MAX
50/60 Hz
Extron
DTP HD DA4 4K 330
DTP Distribution Amplier
HDMI HDMI3
21CONFIGURABLE
HDMI4
INPUT REMOTE
RS-232 IR
OUTPUTS
1
Tx Rx Tx RxG
LINK
SIG
OVER TP
HDBT
RS-232 IR
OUT
Tx Rx Tx RxG
DTP
LOOP THRU
1 2
SIG
OUT
OUT
L R
IN
L
AUDIO OUTPUT
HDMI
2
LINK
HDBT
DTP
LAPTOP
DISPLAY ON
DVD
Combined
PC
DISPLAY OFF
DVD
MUTE
DOC CAM
VOLUME
VideoMore
AUXILIARY
VOLUME
Extron
TLP Pro 320C
3.5" Cable Cubby
TouchLink Pro
Touchpanel
TCP/ IP
Network
Tablet
iPad
Ethernet
Ethernet
Extron
IPL Pro S3
IP Link Pro Control
321 4 +V
Extron
TALLY OUT
HDMI
R
CONTACT IN
1 2 3 4 G
RS-232
TxRx G
IN160 4 HD
Four Input
Scaler
Processor
POWER
12V
COM 1 COM 2 COM 3
0.3A MAX
Tx Rx RTS CTS
G
Tx Rx RTS CTS
G
Tx Rx RTS CTS
Ethernet
IPL PRO S3
G
LAN / PoE
RS-232
RS-232 IR
3
4
Tx Rx Tx RxG
LINK
LINK
SIG
SIG
OVER TP
RS-232 IR
Tx Rx Tx RxG
HDBT
OUT
DTP
HDBT
OUT
DTP
DTP HD DA4 330
RESET
REMOTE
RS-232
LAN
Tx Rx
G
CATx Cable
up to 330' (100 m)
Extron
DTP HDMI
4K 330 D Rx
Receiver
MODEL 80
Display with Speakers
HDMI
FLAT PANEL
OUTPUTS
OVER DTP
RS-232 IR
AUDIO
TxRxGTx Rx
RS-232
MODEL 80
FLAT PANEL
CATx Cable
up to 330' (100 m)
OUTPUTS
OVER DTP
RS-232 IR
AUDIO
TxRxGTx Rx
RS-232HDMI RS-232HDMI RS-232
MODEL 80
FLAT PANEL
Extron
OUTPUTS
DTP HDMI
OVER DTP
RS-232 IR
AUDIO
TxRxGTx Rx
4K 330 D Rx
Receiver
MODEL 80
Display with Speakers
HDMI
FLAT PANEL
OUTPUTS
OVER DTP
RS-232 IR
AUDIO
TxRxGTx Rx
Figure 1. DTP HD DA4 4K 230/330 Application Diagram
RS-232
TxRx G
4
LINK SIG
OUT
LAPTOP
DISPLAY ON
DVD
Combined
PC
DISPLAY OFF
DVD
MUTE
DOC CAM
VOLUME
VideoMore
AUXILIARY
VOLUME
Extron
IN160 4 HD
Four Input
Scaler
5
HDBT
HDBT
OUT
DTP
DTP
Extron
TLP Pro 320C
3.5" Cable Cubby
TouchLink Pro
Touchpanel
Ethernet
Extron
IPL Pro S3
IP Link Pro Control
Processor
RS-232
RS-232 IR
6
Tx Rx Tx RxG
LINK SIG
LINK SIG
OVER TP
HDBT
RS-232 IR
OUT
Tx Rx Tx RxG
DTP
POWER
12V
0.3A MAX
HDBT
DTP
COM 1 COM 2 COM 3
G
Tx Rx RTS CTS
G
Tx Rx RTS CTS
RS-232 IR
7
Tx Rx Tx RxG
LINK SIG
OVER TP
RS-232 IR
OUT
Tx Rx Tx RxG
Ethernet
Tx Rx RTS CTS
TCP/ IP
Network
IPL PRO S3
G
LAN / PoE
8
LINK
HDBT
OUT
DTP
Ethernet
RS-232 Insertion
from Ethernet for
Display Control
DTP HD DA8 230
RESET
REMOTE
RS-232
LAN
Tx Rx
G
Laptop Lap top La ptop
Audio HDMI HDMI HDMI
VGA
100-240V ~ --A MAX
HDMI HDMI3
21CONFIGURABLE
INPUT REMOTE
50-60 Hz
Tab let
iPad
L R
L
R
AUDIO OUTPUT
321 4 +V
TALLY OUT
HDMI
CONTACT IN
1 2 3 4 G
OUT
IN
1 2
HDMI4
HDMI
INPUT
AUDIO
HDMI
100-240V ~ --A MAX
50/60 Hz
Extron
DTP HD DA8 4K 330
DTP Distribution Amplier
LOOP THRU
RS-232 IR
OUTPUTS
1
Tx Rx Tx RxG
SIG
LINK SIG
OVER TP
HDBT
RS-232 IR
OUT
OUT
Tx Rx Tx RxG
DTP
2
LINK SIG
HDBT
DTP
RS-232 IR
3
Tx Rx Tx RxG
LINK SIG
OVER TP
HDBT
RS-232 IR
OUT
Tx Rx Tx RxG
DTP
Extron
DTP HDMI
4K 330 D Rx
Receiver
Displays with
Speaker s
CATx Cable
up to 330' (100 m)
OUTPUTS
AUDIO
HDMI
MODEL 80
FLAT PANEL
OVER DTP
RS-232 IR
TxRxGTx Rx
RS-232
MODEL 80
OUTPUTS
OUTPUTS
OUTPUTS
OUTPUTS
OVER DTP
OVER DTP
RS-232 IR
AUDIO
AUDIO
TxRxGTx Rx
MODEL 80
FLAT PANEL
OVER DTP
RS-232 IR
RS-232 IR
AUDIO
TxRxGTx Rx
TxRxGTx Rx
MODEL 80
MODEL 80
OUTPUTS
OVER DTP
OVER DTP
RS-232 IR
AUDIO
FLAT PANEL
RS-232 IR
AUDIO
TxRxGTx Rx
TxRxGTx Rx
MODEL 80
MODEL 80
OUTPUTS
OVER DTP
RS-232 IR
AUDIO
TxRxGTx Rx
FLAT PANEL
CATx Cable
up to 330' (100 m)
OUTPUTS
AUDIO
MODEL 80
Extron
DTP HDMI
OVER DTP
RS-232 IR
TxRxGTx Rx
4K 330 D Rx
Receiver
RS-232HDMI
Figure 2. DTP HD DA8 4K 230/330 Application Diagram
Extron DTP HD DA4 4K 230/330 and DTP HD DA8 4K 230/330 • Introduction 3
Installation and Operation
This section of the guide describes the following topics concerned with the installation,
setup, and operation of the DTP HD DA4 and DTP HD DA8 series of distribution amplifiers.
z Mounting the Units
z Front Panel Features
z Rear Panel Features
z Connecting the Input Source
z Twisted Pair Recommendations for DTP Communication
z Wiring for RS‑232 Control
Mounting the Units
ATTENTION:
• Installation and service must be performed by authorized personnel only.
• L’installation et l’entretien doivent être effectués par le personnel autorisé
uniquement.
The DTP HD DA4 and DTP HD DA8 series of distribution amplifiers can be placed on a
table, mounted in a rack, or mounted under a desk or table.
Tabletop Use
Affix the included rubber feet to the bottom of the unit and place it in any convenient
location.
Mounting Kits
Mount the unit using any optional compatible mounting kit listed on the Extron website
(www.extron.com), in accordance with the directions included with the kit. For rack
mounting, see UL Rack‑Mounting Guidelines on the next page.
Extron DTP HD DA4 4K 230/330 and DTP HD DA8 4K 230/330 • Installation and Operation 4
UL Rack-Mounting Guidelines
The following Underwriters Laboratories (UL) requirements pertain to the installation of the
unit into a rack.
• Elevated operating ambient temperature — If installed in a closed or multi-unit rack
assembly, the operating ambient temperature of the rack environment may be greater
than room ambient. Therefore, consider installing the equipment in an environment
compatible with the maximum ambient temperature (TMA = +122 °F, +50 °C) specified
by Extron.
• Reduced air flow — Installation of the equipment in a rack should be such that the
amount of air flow required for safe operation of the equipment is not compromised.
• Mechanical loading — Mounting of the equipment in the rack should be such that a
hazardous condition is not achieved due to uneven mechanical loading.
• Circuit overloading — Consideration should be given to the connection of the
equipment to the supply circuit and the effect that overloading of the circuits might have
on overcurrent protection and supply wiring. Appropriate consideration of equipment
nameplate ratings should be used when addressing this concern.
Front Panel Features
C
E
LOOP
THRU
LOOP
THRU
1
1
OUTPUTS
2
2
34
OUTPUTS
34
E
DTP HD DA4 Series
DTP DISTRIBUTION AMPLIFIER
5
6
7
8
DTP HD DA8 Series
DTP DISTRIBUTION AMPLIFIER
INPUT
SIGNAL
CONFIG
A B F
HDCP
D
C
INPUT
SIGNAL
CONFIG
A B F
Power status LED — Lights green when power is applied to the unit.
A
USB Config port — Used for firmware updates, SIS configuration, and software
B
HDCP
D
control. This port can be used as an alternative to the rear panel Remote RS-232 captive
screw connector.
NOTES:
• Neither port has precedence and commands from either port are handled in
the order they are received.
• Extron recommends that the USB port is used for temporary connections.
If a permanent connection is required, the RS-232 port should be used.
Input Signal LED — Lights green when a signal is detected on the HDMI input.
C
Input HDCP LED — Lights green when HDCP presence is detected on the HDMI
D
input.
Output Signal LEDs — Light green when a signal is detected on the HDMI outputs.
E
Output HDCP LEDs — Light green when HDCP presence is detected on the HDMI
F
outputs.
Extron DTP HD DA4 4K 230/330 and DTP HD DA8 4K 230/330 • Installation and Operation 5
Loading...