Extron electronic CS 120P, CS 1226T, CS 26T User Manual

CS 26T and CS 120P

CS 1226T SpeedMount Ceiling Speaker System

User Guide

Speakers

68-2161-01 Rev. A

08 13

Safety Instructions

Safety Instructions • English

WARNING: This symbol, , when used on the product, is intended to

alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may present a risk of electric shock.

ATTENTION: This symbol, , when used on the product, is intended to alert

the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the Extron Safety and Regulatory Compliance Guide, part number 68-290-01, on the Extron website, www.extron.com.

Instructions de sécurité • Français

AVERTISSEMENT: Ce pictogramme, , lorsqu’il est utilisé sur le

produit, signale à l’utilisateur la présence à l’intérieur du boîtier du produit d’une tension électrique dangereuse susceptible de provoquer un choc électrique.

ATTENTION: Ce pictogramme, , lorsqu’il est utilisé sur le produit,

signale à l’utilisateur des instructions d’utilisation ou de maintenance importantes qui se trouvent dans la documentation fournie avec le matériel.

Pour en savoir plus sur les règles de sécurité, la conformité à la réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets connexes, lisez les informations de sécurité et de conformité Extron, réf. 68290-01, sur le site Extron, www.extron.fr.

Sicherheitsanweisungen • Deutsch

WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer darauf

aufmerksam machen, dass im Inneren des Gehäuses dieses Produktes gefährliche Spannungen herrschen, die nicht isoliert sind und die einen elektrischen Schlag verursachen können.

VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer

in der im Lieferumfang enthaltenen Dokumentation besonders wichtige Hinweise zur Bedienung und Wartung (Instandhaltung) geben.

Chinese Simplified（简体中文）

警告：产品上的这个标志意在警告用户该产品机壳内有暴露的危险

电压，有触电危险。

注意：产品上的这个标志意在提示用户设备随附的用户手册中有

重要的操作和维护(维修）说明。

关于我们产品的安全指南、遵循的规范、

使用的特性等相关内容，敬请访问

安全规范指南，产品编号

68-290-01。

EMI/EMF 的兼容性、无障碍

Extron 网站 www.extron.cn，参见 Extron

Chinese Traditional（繁體中文）

警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著

可能會導致觸電之風險的未絕緣危險電壓。

注意 若產品上使用此符號，是為了提醒使用者。

有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關主題的詳細資訊，請瀏覽 Extron 網站：www.extron.cn，然後參閱《Extron 安全性與法規遵

守手冊》，準則編號 68-290-01。

Japanese

警告: この記号が製品上に表示されている場合は、筐体内に絶縁されて

いない高電圧が流れ、感電の危険があることを示しています。

注意: この記号が製品上に表示されている場合は、本機の取扱説明書に

記載されている重要な操作と保守(整備)の指示についてユーザーの

  注意を喚起するものです。

安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目については、エクストロンのウェブサイト www.extron.jp より

『Extron Safety and Regulatory Compliance Guide 』 (P/N 68-290-01) をご覧ください。

Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung, EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer 68290-01) auf der Extron-Website, www.extron.de.

Instrucciones de seguridad • Español

ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto,

avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del producto, lo que puede representar un riesgo de descarga eléctrica.

ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa

al usuario de la presencia de importantes instrucciones de uso y mantenimiento recogidas en la documentación proporcionada

con el equipo

Para obtener información sobre directrices de seguridad, cumplimiento de normativas, compatibilidad electromagnética, accesibilidad y temas relacionados, consulte la Guía de cumplimiento de normativas y seguridad de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.es.

Korean

경고: 이 기호 , 가 제품에 사용될 경우, 제품의 인클로저 내에 있는

접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을 경고합니다.

주의: 이 기호 , 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와

있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.

안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에 대한 자세한 내용은 Extron 웹 사이트(www.extron.co.kr)의 Extron 안전 및 규제 준수 안내서, 68-290-01 조항을 참조하십시오.

FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part15 of the FCC rules. The ClassA limits provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference; the user must correct the interference at his own expense.

NOTE: For more information on safety guidelines, regulatory compliances, EMI/EMF compatibility,

accessibility, and related topics, see the “Extron Safety and Regulatory Compliance

Guide

” on the Extron website.

Trademarks

All trademarks mentioned in this guide are the properties of their respective owners.

The following registered trademarks

, registered service marks

RGBSystems, Inc. or Extron Electronics:

Registered Trademarks

AVTrac, Cable Cubby, CrossPoint, eBUS, EDID Manager, EDID Minder, Extron, Flat Field, GlobalViewer, Hideaway, Inline, IPIntercom, IPLink, Key Minder, LockIt, MediaLink, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, SoundField, SpeedMount, SpeedSwitch, System Integrator, TeamWork, TouchLink, V-Lock, VersaTools, VN-Matrix, VoiceLift, WallVault, WindoWall, XTP and XTP Systems

Registered Service Mark

AAP, AFL (Accu-Rate Frame Lock), ADSP (Advanced Digital Sync Processing), AIS (Advanced Instruction Set), Auto-Image, CDRS (Class D Ripple Suppression), DDSP (Digital Display Sync Processing), DMI (Dynamic Motion Interpolation), DriverConfigurator, DSPConfigurator, DSVP (Digital Sync Validation Processing), FastBite, FOXBOX, IP Intercom HelpDesk, MAAP, MicroDigital, ProDSP, QS-FPC (QuickSwitch Front Panel Controller), Scope-Trigger, SIS, Simple Instruction Set, Skew-Free, SpeedNav, Triple-Action Switching, XTRA, ZipCaddy, ZipClip

(SM)

: S3 Service Support Solutions

Trademarks

(SM)

, and trademarks

(®)

(™)

(TM)

are the property of

Conventions Used in this Guide

Notifications

The following notifications are used in this guide:

WARNING: A warning indicates a situation that has the potential to result in death or

severe injury.

ATTENTION: Attention indicates a situation that may damage or destroy the product or

associated equipment.

NOTE: A note draws attention to important information.

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.

Introduction............................................................ 1

About this Guide ................................................. 1

Overview ............................................................ 1

Features ............................................................. 1

Application Example ........................................... 2

Installation .............................................................. 3

Installation Considerations .................................. 3

Installation Conﬁgurations ................................... 3

Installing the CS 1226T System — Single

Installer .............................................................. 4

Installing the CS 120P in a Suspended

Ceiling — Division of Labor .............................. 15

Installing the CS 26T in a Suspended

Ceiling — Division of Labor .............................. 20

Installing the CS 120P in a Hard Ceiling ............ 26

CS 26T and CS 120P User Guide • Contents v

CS 26T and CS 120P User Guide • Contents vi

Introduction

This section gives an overview of the Extron CS 1226T SpeedMount Ceiling Speaker System, consisting of the CS 26T speakers and CS 120P enclosure. It also provides a list of system features and an application diagram. Topics include:

• About this Guide

• Overview

• Features

• Application Example

About this Guide

This guide describes the Extron CS 1226T Speaker System, the CS 26T speaker pair and the CS 120P enclosure and provides instructions for installing all components of the system in different types of ceilings.

Overview

The CS 1226T system features a low profile design that houses a 6.5-inch woofer and a

0.75-inch tweeter (CS 26T) contained in a UL 2043 rated enclosure (CS 120P) designed for use in plenum rated ceiling spaces.

This unique speaker system splits installation into two phases, rough-in and finish, allowing the installer to “reserve” space for the speaker system by installing the CS 120P back can and then later installing the CS 26T speaker. This two-step process (division of labor) is especially useful when multiple installers are involved. The CS 120P can be installed by the low voltage contractor while the CS 26T can be installed by the AV systems contractor.

Features

• US and metric ceiling grids — The CS 120P enclosure can be installed in both U.S.

and metric ceiling grid systems (for metric systems, the CS 120P end tabs are cut off).

• UL 2043 listed — The CS 1226T is UL 2043 listed (only when the CS 26T is used with

the CS 120P).

NOTE: The use of any other back can other than the CS 120P or those provided by

Extron voids the UL 2043 rating.

• Optional open back configuration — The CS 26T can be used without the CS 120P

by reconfiguring the attached bass port plate (allowing the CS 26T to function as an open back speaker).

NOTE: When the CS 26T is used without the CS 120P, it is not suitable for air

handling spaces and is not UL 2043 rated.

• New dog-leg design — The new dog-leg design eliminates jamming during

installation.

• Low profile enclosure — The low profile enclosure is compatible with plenum

environments where overhead space may be limited.

CS 26T and CS 120P User Guide • Introduction 1

Application Example

• Selectable taps — The rotary tap selector switch, located behind the grille, sets the

speaker to operate in either 8-ohm direct or 70 volt /100 volt operation with 16, 8, 4, 2, and 1 watt taps.

• Magnetic grille — Magnets spaced around the grille edge enable it to be easily

attached and to remain firmly in place.

The illustration below is one example of configuring a system using the CS 1226T.

Desk Microphones

VCR

DVD

DOC CAM

LAPTOP

OFF

DISPLAY MUTE

SCREEN UP

SCREEN DOWN

TCP/IP

Network

LAN

POWER 12V 500mA MAX

RS-232

COM1

RT SC TS

INPUT

1 2 3 4

Ethernet

RELAY 1

COM 2

RELAY

TXRX

SG S

COM 3

TXRX

SG S

VID

100-240V 50-60Hz

Extron IN1508

Scaling Presentation Switcher

XPA 2003C-70V

GREEN - ACTIVE AMBER - STANDBY

100-240V 1.5A, 50-60 Hz

RS-232

OUTPUT

3 4

AUDIO INPUT

OUTPUT

RGB

LISTED 1T23

U S

I.T.E.

Y, B-Y, R-Y

DVI

RGB

R-Y

B-Y

Extron TLP 700TV

7" TouchLink Tabletop Touchpanel

Extron

O U T

MIC/LINE INPUTS

MIC

+48V

IPL 250

IP Link Control Processor

DMP 64

RS-232(1)

RESET

LAN

I/O

Rx x T

RS-232(2)

1 2

4 5

Rx Tx

Laptop

Extron DMP 64

POWER

12V

1.5A MAX

Digital Matrix Processor

70 V 3

OUTPUTS

8Ω / 4Ω 1 2

HPF

CLASS 2 WIRING

80 Hz

OFF

3 3

INPUTS

ATTENUATION

∞

LIMITER/

∞

REMOTE

PROTECT

∞

STANDBY

SIGNAL

Extron XPA 2003C 70V

Combo Power Amplier

Extron CS 1226T

SpeedMount Ceiling Speaker System

Extron SI 26

Surface-Mount Speakers

Figure 1. Application Diagram of a CS 1226T Installation

CS 26T and CS 120P User Guide • Introduction 2

Installation

This section provides instructions for installing the CS 26T speakers and the CS 120P enclosure. Topics include:

• Installation Considerations

• Installation Configurations

• Installing the CS 1226T — Single Installer

• Installing the CS 120P in a Suspended Ceiling — Division of Labor

• Installing the CS 26T in a Suspended Ceiling — Division of Labor

• Installing CS 120P in a Hard Ceiling

Installation Considerations

WARNING: Risk of severe bodily injury from falling or sharp equipment.

Installation and service must be performed by authorized personnel only.

• All wiring and electrical connections must conform to all applicable building codes and

local ordinances.

• Installation in a plenum-rated environment requires plenum rated cable or conduit.

• If using secondary support cables, the installer provides the cables.

Installation Configurations

The CS 26T can be configured in the following ways:

• Open-back: For configurations in which the CS 120P is not used, use the C-ring

accessory, available at www.extron.com. The C-ring spreads out the clamping force of the dog-legs when used in drop ceilings and gypsum ceilings.

• Using the CS 120P: When used with the CS 120P, the CS 26T can be placed in

plenum environments. This is the only configuration that is UL 2043 rated.

NOTE: The CS 120P can be ordered separately or as part of the CS 1226T kit.

For hard ceiling installations, see Installing the CS 120P in a Hard Ceiling on page 26.

CS 26T and CS 120P User Guide • Installation 3

Installing the CS 1226T System — Single Installer

Side View

If a single installer is installing the CS 1226T system, follow this procedure for the entire system:

NOTE: The ceiling grid must be installed before the installation of the CS 1226T begins.

• Verify if ﬁberglass ceiling tiles are being used (see step 2 below and step11 on

page 7 for details).

• The grid face must be at least 15/16 inch (24 mm) for proper installation of the

CS 120P (see step20 on page 13 for details on suspending the enclosure on a smaller grid face).

15/16" (24 mm)

Grid Face

Figure2. GridFaceExample

1. Disconnectpower — Power down all attached devices before proceeding.

2. Verifythespacewherethesystemwillbeinstalled — Ensure that there is sufficient

clearance above the ceiling tile for the unit to be installed.

3. CutaholefortheCS26Tspeaker—Use the provided cutout template to outline

the hole to be cut in the ceiling tile as described below.

a. Remove the ceiling tile.

b. To find the center of the tile, use a tape measure to measure the space between

two opposite corners, and mark the half-way point.

c. Position the center hole of the cutout template directly over the center of the tile

that you marked in step3b.

d. Using the provided cutout template, trace a circle on the ceiling tile as follows:

ForinstallationsinceilingtilesthatareNOTfiberglassorwheninstalling thespeakersinanopenbackconfiguration: Trace a circle around the CS 26T

cutout template.

NOTE: The fiberglass tile adapters are not needed and can be discarded.

Forinstallationsin1-inch(0.25cm)thickfiberglassceilingtileswiththe CS120P:

NOTE: A set of fiberglass tile adapters is provided with both the CS 26T and

the CS 120P. Only one set is needed to install the CS 26T with the CS 120P kit in a 1-inch (0.25 cm) thick fiberglass tile. The adapter works only with 1-inch (0.25 cm) thick fiberglass tile.

i. Place the fiberglass tile adapter around the outer diameter of the template that

was positioned in step 3c.

ii. Trace a circle around the outer diameter of the adapter.

CS26TandCS120PUserGuide•Installation 4

+ 23 hidden pages