Extron electronic BNC 5 RC User Manual
BNC 5 RC Termination Instructions
pin
Shielding
Ferrule
Color-coded
heat shrink tube
Outer insulationConductor
Center pin
3
4
BNC plug body
Support sleeve
Center
1. Slide the color coded heat shrink tubing or BNC
strain relief over the cable, then slide the ferrule over
the cable. See the top diagram.
2. Carefully strip the end of the coaxial cable to expose
the shielding and inner conductor.
3. Insert the center conductor into the center
pin.
4. Insert the conductor and pin into
the crimp tool (part #100-133-01)
with the included die. With the
flange on the center pin flush with
the edge of the die, crimp using
the die’s .068” crimp height.
.496"
.250"
(6.4 mm)
(11.9 mm)
.375"
(9.5 mm)
2
.094"
(2.4 mm)
Conductor
NOT TO SCALE
Center Contact - flange flush
with edge of die
Crimp Center Contact
Outer Insulation
Shielding
Extron Electronics, USA
1230 South Lewis Street
Anaheim, CA 92805
USA
www.extron.com
714.491.1500
Fax 714.491.1517
5. Insert the center pin into the BNC
body until the pin meets resistance.
Extron Electronics, Europe
Beeldschermweg 6C
3821 AH Amersfoort
The Netherlands
+31.33.453.4040
Fax +31.33.453.4050
5
BNC plug body
Continue firmly pushing the pin into
the BNC body until the pin snaps
into the detent position.
6. Slide the exposed shielding over the support
sleeve of the BNC.
7. Slide the ferrule over the
shielding and against the BNC
7
body. Using the die’s .213” crimp
height, crimp the ferrule.
8. Slide and set the heat shrink
tubing or BNC strain relief over
the ferrule.
Related tools and parts list:
Crimp tool ............................................ 100-133-01
BNC 5 RC cable (500’ spool) ................ 22-127-02
Male BNC RC connectors (qty. 50) ...... 10-452-01
Extron Electronics, Asia
135 Joo Seng Road, #04-01
PM Industrial Building
Singapore 368363
+65.6383.4400
Fax +65.6383.4664
5
8
Extron Electronics, Japan
Daisan DMJ Building 6F
3-9-1 Kudan Minami
Chiyoda-ku, Tokyo 102-0074 Japan
+81.3.3511.7655
Fax +81.3.3511.7656
Crimp ferrule
Heat shrink tubing
or
Recommended
glue
Install strain relief
68-482-01
Rev. D
Loading...