Extron electronic AAP 424, AAP 314 User Manual

Go to www.extron.com for the

IMPO RTANT:

Go to www.extron.com for the

complete user guide, installation

instructions, and specifications.

AAP 314 and AAP 424 • Installation Guide

Follow the steps below to install an AAP 314 or AAP 424 wallplate, along with the Decora
faceplates and AAPs of your choice.

AAP 314 and AAP 424 • Installation Guide

complete user guide, installation

instructions, and specifications.

Follow the steps below to install an AAP 314 or AAP 424 mounting frame, along with the
Decora® modules and AAPs of your choice.

1

Using the supplied mud ring as a guide, mark and cut out the
appropriate material within the marked area.

2

Insert the mud ring into the opening, and rotate the locking

3

arms.

3

COMPUTER

C

B

C

A

Run all required cables from the output or input
device location, behind the wall and to the Decora
module.

4

Mount the cabled
through the mud ring as necessary.

Decora

module into the mud ring. Feed cables

IMPO RTANT:

AAP 314

5

Mount the AAPs to the AAP 314 or AAP 424.

6

Connect the remaining cables to the AAPs.

COMPUTER

C

B

C

A

AAP 314

(2) #6-32 x 1/4" screws

Extron USA Headquarters

+1.800.633.9876 (Inside USA/Canada Only)

© 2013 Extron Electronics — All rights reserved. All trademarks mentioned are the property of their respective owners. www.extron.com

(2) #6-32 x 1/2" screws

7

Use the provided screws to mount the AAP 314 or AAP 424
to the mud ring assembly, feeding the cables through the
mud ring as necessary.

Extron USA - West: +1.714.491.1500 FAX: [phone]

Extron USA - East: +1.919.850.1000 FAX: [phone]

68-2521-50

Rev. A

11 13