Extron electronic 10 Plus user manual

Specifications — System 10 Plus Switcher

Video

Gain ............................................... 0 dB, unity

Bandwidth .................................... 250 MHz (-3 dB)

Differential phase error .............. 0.01º at 3.58 MHz and 4.43 MHz

Differential gain error ................. 0.01% at 3.58 MHz and 4.43 MHz

Crosstalk ....................................... -35 dB @ 10 MHz (typical)

Isolation ......................................... -55 dB @ 10 MHz (typical)

Video input

Number/signal type ................... 8 or 10 RGBHV, RGBS, RGsB, S-video, or NTSC/PAL composite video

Connectors .................................... (8 or 10) x 5 BNC female

Nominal level ............................... 1 Vp-p for Y of S-video and for composite video

0.7 Vp-p for RGB

0.3 Vp-p for C of S-video

Minimum/maximum levels ...... Analog: 0.3 V to 2 Vp-p

TTL: up to 5 Vp-p

Impedance .................................... 75 ohms (deselected inputs)

Horizontal frequency .................. 15 kHz to 150 kHz

Vertical frequency ....................... 30 Hz to 150 Hz

Return loss .................................... <-25 dB @ 10 MHz

Video output

Number/signal type ................... 1 RGBHV, RGBS, RGsB, or

1 S-video (NTSC/PAL), or

1 composite video (NTSC/PAL)

Connectors .................................... 5 BNC female (RGBHV/RGBS/RGsB)

2 BNC female (S-video)

1 BNC female (composite video)

Nominal level ............................... 1 Vp-p for Y of S-video and for composite video

0.7 Vp-p for RGB

0.3 Vp-p for C of S-video

Minimum/maximum levels ...... 0.3 V to 2.0 Vp-p

Impedance .................................... 75 ohms

Return loss .................................... -30 dB @ 5 MHz

DC offset ....................................... None

Switching type ............................. Triple-Action™; 0 s to 7.5 s, adjustable

Sync

Input type ..................................... RGBHV, RGBS, RGsB

Output type .................................. RGBHV, RGBS, RGsB

Standards ...................................... NTSC and PAL

Input level ..................................... 0.5 V to 5 Vp-p

Output level.................................. 0.5 V to 5 Vp-p, unterminated

Input impedance .......................... 510 ohms (deselected inputs)

Output impedance ...................... 75 ohms

Max input voltage ....................... 5 Vp-p

Input sensitivity ........................... 5 Vp-p

Polarity .......................................... Positive or negative (follows input)

Audio

Gain ............................................... Unbalanced output: 0 dB; balanced output: +6 dB

1-2 System 10 Plus • Specifications

Frequency response ..................... 20 Hz to 20 kHz, ±0.05 dB

THD + Noise ................................ 0.015% @ 20 Hz to 20 kHz, worst case

S/N ................................................ >95 dB at maximum output

Crosstalk ....................................... <-85 dB @ 20 Hz to 20 kHz, fully loaded

Stereo channel separation .......... >60 dB @ 20 Hz to 20 kHz

CMRR ............................................ >60 dB @ 60 kHz

Audio input

Number/signal type ................... 10 stereo, balanced/unbalanced

Connectors .................................... (8 or 10) 5 mm captive screw connectors, 6 conductor

Impedance .................................... >10k ohms unbalanced, 20k ohms balanced, AC coupled

Nominal level ............................... -20 dBV (100 mV), -10 dBV (316 mV), 0 dBu (0.775 V), or +4 dBu (1.23 V),

configurable

0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu
+4 dBu and 0 dBu are professional audio line level standards.

-10 dBV and -20 dBV are semiprofessional, computer audio, and consumer audio standards.

Maximum level ............................ +13.2 dBu, (balanced or unbalanced) at 1%THD+N

Input gain adjustment ................. -95 dB to 0 dB, adjustable per input

Audio output

Number/signal type ................... 1 stereo, balanced/unbalanced

Connectors .................................... (1) 5 mm captive screw connector, 6 pole

2 BNC female

Impedance .................................... 50 ohms unbalanced, 100 ohms balanced

Gain error ...................................... ±0.2 dB channel to channel

Maximum level (Hi-Z) ................ > +19.2 dBu, balanced or unbalanced at 1%THD+N

Maximum level (600 ohm) ......... > +19.2 dBm, balanced or unbalanced at 1%THD+N

Control/remote — switcher

Serial control port ........................ RS-232, 9-pin female D connector

Baud rate and protocol ............... 9600 baud, 8 data bits, 1 stop bit, no parity

Serial control pin configurations .... 2 = TX, 3 = RX, 5 = GND

Remote key pad control .............. (1) 25-pin D female

IR controller module ................... IR-201 (optional), part #70-142-01; or IR-301 (optional), part #70-143-01

Program control ........................... Extron’s control/configuration program for Windows

Extron’s Simple Instruction Set (SIS™)

®

Control — projector

Projector control port ................. (1) 15-pin HD female

General

Power ............................................. 90 VAC to 260 VAC, 50/60 Hz, 10 watts, internal, autoswitchable

Temperature/humidity .............. Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing

Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing

Rack mount ................................... Yes, with attached rack ears

Enclosure type .............................. Metal

Enclosure dimensions ................. 5.25" H x 17.5" W x 9.6" D (3U high, full rack wide)

13.3 cm H x 44.4 cm W x 24.4 cm D

(Depth excludes connectors. Width excludes rack ears.)

Product weight ............................. 13.2 lbs (6.0 kg)

Shipping weight ........................... 20 lbs (9 kg)

DIM weight (International) ........ 25 lbs. (12 kg)

Vibration ....................................... ISTA 1A in carton (International Safe Transit Association)

System 10 Plus • Specifications 1-3