Extreme USB DIGI-USB2-4H User Manual

USB 2.0 DIGI-USB2-4H

4-Port USB 2.0 100m CAT 5e/6/7 Extender System

User Guide

Thank you for purchasing the DIGI-USB2-4H Extender System.

Please read this guide thoroughly.

This document applies to Part Numbers: 01-00448, 01-00449, 01-00450, 01-00451, 01-00537, 02-00028, and
02-00029.

FCC Radio Frequency Interference Statement Warning

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received
including interference that may cause undesired operation.

CE Statement

We declare under our sole responsibility that the USB 2.0 DIGI-USB2-4H, to which this declaration relates, is
in conformity with European Standard EN 55022, EN 61000 and EN 55024.

IC Statement

This Class B digital apparatus complies with Canadian ICES-003.

WEEE Statement
The European Union has established regulations for the collection and recycling of all waste electrical
and electronic equipment (WEEE). Implementation of WEEE regulations may vary slightly by individual EU
member states. Please check with your local and state government guidelines for safe disposal and recycling
or contact your national WEEE recycling agency for more information.

Product Operation and Storage
Please read and follow all instructions provided with this product, and operate for intended use only.
Do not attempt to open the product casing as this may cause damage and will void warranty. Use only
the power supply provided with this product. When not in use, product should be stored in a dry location
between -20°C and 70°C.

Contents

Introduction .............................................................................................................3

DIGI-USB2-4H Product Contents.................................................................................................... 3

About the DIGI-USB2-4H .................................................................................................................. 3

The Local Extender ............................................................................................................................. 4

The Remote Extender ........................................................................................................................ 5

Installing the DIGI-USB2-4H System ......................................................................6

Requirements ....................................................................................................................................... 6

Preparing Your Site ............................................................................................................................. 6

Installing the Local Extender .......................................................................................................... 7

Connecting the Local Extender to the Remote Extender .................................................... 7

Installing the Remote Extender .................................................................................................... 7

Checking the Installation ................................................................................................................. 8

Connecting a USB Device ................................................................................................................. 9

Compatibility ........................................................................................................................................ 9

USB Extender Mounting Options .........................................................................10

Option 1: USB Extender Mounting Kit ....................................................................................... 10

Option 2: USB Extender Direct Surface Mounting ................................................................ 11

Troubleshooting ....................................................................................................12

Technical Glossary .................................................................................................13

Specifications.........................................................................................................14

Introduction

This guide provides product information for the USB 2.0 DIGI-USB2-4H, installation instructions and
troubleshooting guidelines. The instructions in this guide assume a general knowledge of computer
installation procedures, familiarity with cabling requirements and some understanding of USB devices.

NOTE: Notes provide additional information that could be useful.

note

CAUTION: Cautions provide important information about an operational requirement.

USB 2.0 DIGI-USB2-4H Product Contents

Your DIGI-USB2-4H is packaged with:

• Local Extender

• Remote Extender

• USB 2.0 Cable

• Remote Extender AC International Power Adapter

• Country Specific Power Cable

• Quick Start Guide

About the DIGI-USB2-4H

The USB 2.0 DIGI-USB2-4H incorporates ExtremeUSB® technology, enabling users to extend USB beyond the
standard 5m cable limit for USB 2.0 peripheral devices. The DIGI-USB2-4H extender system is composed of
two individual units: the Local Extender and the Remote Extender and has the following key features:

• 100m of extension when directly connected over CAT 5e/6/7 cables

• Support for new USB 3.0 host controllers and devices

• Support for bulk and HID type devices (storage and mouse/keyboard types)

USB 3.0 devices will perform at USB 2.0 speeds if extended through the DIGI-USB2-4H.

note

The DIGI-USB2-4H includes the ExtremeUSB® suite of features:

• Transparent USB extension

• True plug and play; no software drivers required

• Works with all major operating systems: Windows®, OS X® and Linux®

3

The Local Extender

The local extender unit connects to the computer using a standard USB 2.0 cable. Power for this unit is
provided by the host computer.

Front View

Rear View

ITEM TYPE DESCRIPTION

1 Power LED (Blue)

LED turns on when power is supplied.
LED is o when no power is supplied by the host computer.

Indicates a valid ExtremeUSB link is established between the local and remote
extenders.

2 Link LED (Green)

LED turns on when link between local and remote extender is established.
LED is o when there is no link between local and remote extenders.
LED is slow blinking when the unit is attempting to establish a link.

LED turns on when the DIGI-USB2-4H system is properly enumerated on the
host computer.
LED blinks when in a suspended state.

Indicates data transmission is occurring between local and remote extenders.
LED blinks intermittently with or without a USB device connected.
When the local and remote extenders are in suspend mode, the LED is o.

3

4

Host LED
(Green)

Activity LED
(Amber)

5 Cong Reserved for manufacturer use.

6 Mode Reserved for manufacturer use.

7 USB Host Port

8 Link Port (RJ45)

Used to connect the local extender unit to the host computer. Accepts Type B
connector into the local extender unit.

Accepts RJ45 connector for CAT5e/6/7 cabling to connect the local extender
unit to the remote extender unit.

4