1
Deluxe Heat & Massage Inversion Table
Model ITM 4500
Photo may differ from actual product
CAUTION:
WARNING: DO NOT USE THIS
INVERSION TABLE WITHOUT A
PHYSICIAN’S APPROVAL
It is recommended that Inverting
upside down be supervised.
Keep children away.
Read all instructions carefully
before using.
Tighten all bolts before using
equipment.
Leave adequate space to
properly invert.
Questions/ Comments
PLEASE DO NOT CONTACT THE
STORE FOR PARTS OR
SERVICE QUESTIONS
Extreme Products Group is committed to
providing the very best of quality and
customer satisfaction for all of the products
we distribute. If for any reason , you are
dissatisfied with the product you have
purchased or need assistance in any way,
please do not hesitate to contact our
technical support voicemail system
at::623-888-6379 and a service advisor
will return your call. Or send us an email at:
service@extremeproductsgroup.com
For any and all parts, please visit:
Web: www.extremeproductsgroup.com
Mon.-Fri 9:00 am – 5:00 pm Phoenix Time
S
Ver 080615
2
BEFORE BEGINNING ASSEMBLY…
Take a few moments to familiarize yourself with the specific parts and hardware included with your
product. Make sure all the parts and hardware are included in the carton and examine them for any
damage that may have occurred in transport. Some parts may be pre-assembled and pre-installed.
CAUTION
WARNING:
BEFORE STARTING ANY INVERSION PROGRAM, CONSULT YOUR PHYSICIAN.
Read all instructions very carefully before using equipment
Tighten all bolts securely before using equipment
Product Warranty
Limited Liability
Extreme Products Group warrants that this product will be free from defects in materials and workmanship
for a period of 1 year on the frame, and 90 days on all other parts from date of purchase. This warranty
applies only to the original purchaser when purchase of the product is from an authorized retailer and is for
personal or household use, but not when the sale is for commercial use. This warranty is not transferable.
EXCEPT FOR THE LIMITED EXPRESS WARRANTY STATED HEREIN, EXTREME PRODUCTS
GROUP DISCLAIMS ALL OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
Extreme Products Group, will not be liable for any loss or damage, including incidental or consequential
damages of any kind, whether based upon warranty, contract or negligence and arising in connection with
the sale, use or repair of the product.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY HAVE OTHER
RIGHTS THAT VARY FROM STATE TO STATE.
In the event of failure of this product to conform to this warranty during the warranty period, please call
Extreme Products Group Customer Service Number at 623-888-6379 for assistance in the repair or
replacement of the product or any covered part. Extreme Products Group will repair or replace, at its own
option, the product or any covered part, except that this warranty does not cover damage caused by
accident ( including transit) , or repairs or attempted repairs by any person not authorized by Extreme
Products Group, or by vandalism, misuse, abuse, or alteration. The Warranty Period is based on the
purchase date of the product validated by the Authorized Retailers Register Receipt, or valid copy of
transaction statement. Shipping and Handling is not included. By continuing with the assembly and use of
this products acknowledges your understanding of the Warnings and Warranty Guidelines stated above.
If you require technical support under this warranty, please call Customer Service at ( 623-888-6379).
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site at :
www.extremeproductsgroup.com
3
Parts Listing
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com
Part# Description QTY Part# Description QTY
01 Base-frame-Front/Rear 1F/1R 27 Hand Controller 1
02 Handlebar 2 28 Power Adaptor 1
03 Backrest Support Tube 1 29
Base Frame End Caps
2
04 Back Rest Pad 1 30 Arc Caps 2
05 Body Height Adjustment Tube 1 31L
Connecting Bracket - Left
1
06
Adjustable Leg Hold Tube
1 31R
Connecting Bracket - Right
1
07 Leg Tube-REAR 1 32 Wrench-#13/#17 2
08 Foot Rest Plate 1
09 Bolt-M8x70mm 4
10
Flat WasherΦ16xΦ8.5x1.5
16
11 Nut M8 10
12 Bolt-M8x30mm 6
13 Bolt-M8x20mm 4
14 Bolt-M8x50mm 2
15 Bolt-M8x50mm 1
16
Metal Bushing for Rear Leg Tube
1
17
Height Adjustment Knob
1
18
Leg Tube Adjustment Knob
3
19
Incline Adjustment Bolt
1
20
Ball Pin- Φ8 x 55mm
1
21
Ball Pin- Φ8 x 78mm
1
22 Foam Leg Rollers 4
23
Oval End Caps-Foot Rest
2
24
Round End Caps
4
25
Head Pad
1
26 Heat & Massage Lumbar Pad 1
25
27
26
28
1
2
2
3
4
5
6
7
8
9
10
11
10
11
9
12
12
12
10
10
12
12
10
10
11
10
13
13
13
13
10
11
14
10
11
15
16
17
20
18
19
21
22
22
22
22
24
24
23
23
24
24
29
29
30
30
32
4
Exploded View
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com
01 Front
01 Rear
31L
31R
5
Step 1- Unfold Frame
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com
Carefully remove Base Frame from carton, and unfold.
Insert safety pin(26) into Right side of frame
Note Front, Rear, Right and Left Sides for further
assembly
Insert safety
pin(26)
1
21
29
29
30
30
01 Front
01 Rear
RIGHT
LEFT
NOTE: Both Side
Rotational Brackets need
to point down toward
floor for further assembly
6
Step 2- Handlebar Assembly
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com
TIGHTEN ALL BOLTS AT THIS TIME
STEP 2
Attach the Handlebar Right (02) to the Base frame Rear(01)
using 2 Bolts (09), 2 Washers (10), and 2 Nuts (11). Repeat
for Handlebar Left (02).
1
2
2
9
10
11
10
11
9
RIGHT
LEFT
7
Step 3- Backrest Assembly to Base Frame
STEP 3 Connecting Backrest Pad & Assembly to Frame
Attach the Completed Backrest Pad Assembly to the Base frame Unit
using Bolts (13), Flat Washers (10) and Lock Nuts (11) as shown
Note that side rotational brackets must face down and bed must be lifted
up onto the brackets in order for this inversion table to work properly
Connect bolt 19 into right side 20 degree hole in bracket
NOTE: TIGHTEN ALL BOLTS AT THIS TIME
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com
Note: Rotational
Side Brackets
must face DOWN
toward floor
Lift Entire Bed
Assembly UP into
Rotational
Brackets
And Secure with
Bolts, Nuts, and
Washers
13
13
10
11
13
13
11
10
4
19
Brackets must
face down
8
STEP 4 -Body Height Adjustment Tube and Rollers
A- Install Foot Rest
Plate (08) into Height
Adjustment Tube (05)
using Hexagonal Bolts
(14), & Flat Washers
(10) and Nut (11)
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com
TIGHTEN ALL BOLTS AT THIS TIME
B- Lift out front roller tube (06) from Height
Adjustment Selector Tube (05) and position as
shown. Slide Foam Rollers (22) over front Tube (06)
and insert Plastic End Caps (24)
C- Insert Rear Foam Roller Tube (7) through Height
Adjustment Tube (05) and secure with Bolt (15),
Metal Spacer (16), Slide Foam Rollers (22) over
Rear Tube (07) and insert End Caps (24) . Make
sure Leg Tube Adjustment Knob (18) is properly
connected to Height Adjustment Tube (05) and
functions properly
5
6
7
8
14
10
11
15
16
18
22
22
22
22
24
24
23
23
24
24
A
B
C
9
STEP 5 -Final Assembly
Slide Completed Height Adjustment Tube and Foot Rest
Assembly (05) into Backrest Support Tube (03) and lock
into place using Height Adjustment Knob (17) and Safety Pin
(20)
This Height Adjustment Knob is spring loaded and should
“lock” into place when adjusted. If it does not, do not use
this product and contact customer service
Note: This product is designed with a Maximum User
Weight of 300 LBS.
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com
NOTE: TIGHTEN ALL BOLTS AT THIS TIME
17 20
5
10
Heat / Massage Pad and Head Pad
Assembly to Backrest Pad
Step 6 Connecting Head Pad and Heat/Massage Lumbar Pad
Attach the Heat / Massage Lumbar Pad(48)and the Head Pad(45) to
Backrest Pad(47) in Desired Position using Velcro. Controller(46) can be
stored in Right Side Pocket of Backrest Pad(44) for easy access.
Note: Please pay careful attention that the power cord is not squeezed or
damaged by the inversion table when using it.
Make Sure All Nuts
Bolts and Screws are
Completely Tightened
Before Use.
Final Assembly
26
28
27
29
26
28
27
29
11
PRECAUTIONS
WARNING: 300 LB WEIGHT CAPACITY
To reduce the risk of serious injury, read all important precautions
instructions and warnings in this manual before using the Inversion
System. Extreme Products Group assumes no responsibility for
personal injury or property damage sustained by or through the use
of the Inversion System.
DO NOT USE THIS INVERSION TABLE WITHOUT A PHYSICIAN’S
APPROVAL, OR IF YOU HAVE ANY OF THE FOLLOWING
CONDITIONS
(this list is for reference only, it is not an exhaustive listing):
Pregnancy; Hiatal Hernia, ventral hernia; glaucoma, Retinal Detachment or
Conjunctivitis; High Blood Pressure, Hypertension, recent Stroke or Transient Ischemic
Attack; heart or Circulatory Disorders for which you are being treated; Spinal Injury;
Cerebral Sclerosis; Acutely Swollen Joints; Bone Weakness ( Osteoporosis ), recent
unhealed fractures, medulary pins and surgically implanted orthopedic supports; the
use of anticoagulants, including high doses of aspirin; Middle Ear Infections, Over
weight or Extreme Obesity.
IF YOUR PHYSICIAN PERMITS YOU TO USE INVERSION THERAPY,
DO SO UNDER THEIR DIRECTION AND HAVE OUR GUIDELINES
APPROVED BY YOUR PHYSICIAN BEFORE USE
DO NOT LET CHILDREN USE THE INVERSION TABLE
UNSUPERVISED.
THERE ARE CERTAIN PEOPLE WHO SHOULD NEVER INVERT. IF
YOU THINK YOU BELONG TO THIS MINORITY, PLEASE CHECK WITH
YOUR PHYSICIAN BEFORE USING THIS INVERSION TABLE.
INSURE THAT ALL NUTS, BOLTS, AND SCREWS ARE COMPLETELY
TIGHTENED BEFORE USING THIS PRODUCT.
SECURE YOUR ANKLES AND LOCK PULL PIN IN PLACE BEFORE
INVERTING.
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com
12
Controller Instruction
Note:
For Safety DO NOT use more than 30 minutes per
session.
If the unit is on and unattended it will auto shut
off at 15 minutes.
Connect the product with power source by 12V adaptor and the indicator light
of "POWER" will blink into standby.
Press the "POWER" button to
start the massage function,
the power indicator light will
stop blinking, the massage
function will start in AUTO
mode with 2ndlevel intensity
Press "AUTO" button
and the massage
modes and intensities
will change
automatically.
In Auto or Manual modes
Press "INTENSITY"
button to change the
intensity of massage
function, there are 5 levels,
circulating a sequence of
2-3-4-5-1-2. The indicator
light of "INTENSITY" is
blinking faster when
intensity is higher.
Press "HEAT" button to
start the heat function.
The indicator light of
"HEAT" is red. Press
again to stop the heat
function, the indicator light
is out.
Press " MANUAL" button to
cancel the auto mode and
start the manual mode.
Press "MANUAL" button to
change the massage
modes. The indicator light
of "MANUAL" is red.
13
USAGE GUIDELINES
INVERSION SELECTOR PIN
Familiarize yourself with the
Inversion Selector Pin located
on the Right Side of the
Inversion Table. The positioning
of the pin will determine the
degree of Inversion that you are
comfortable with.
The 3 selections are:
20- Slight Inversion
40-Moderate Inversion
60- Enhanced Inversion
NOTE: IT IS STRONGLY RECOMMENDED THAT SOMEONE BE
WITH YOU DURING INVERSION. ALTHOUGH THE INVERSION
TABLE IS EASY TO USE, HAVING SOMEONE NEARBY TO “SPOT”
YOU WILL PROVIDE EXTRA SAFETY AND SUPPORT TO THE
INVERSION PROCESS. START WITH 20 DEGREE SETTING
Body Height Adjustment:
Before Starting, insure that the
Inversion Table is at the correct
settings to match your height. ( This
is indicated on the Height
Adjustment Selector in both Inches
and Centimeters.
As each individual’s body type is
different, you will need to find the
correct balance settings for your
specific body type by adjusting the
selector up or down to obtain the
proper balance
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com
Photo may be slightly
different that actual product
Photo may be different than actual product
14
USAGE GUIDELINES- Securing Feet and Ankles
Step 2- Slide Feet under Foam
Rollers and rest heels against
rear Heel Cups. Release top
button and slowly “ratchet back”
front rollers against legs.
Step 3- Ratchet front rollers
tight against legs and secure
legs and ankles in place by
making sure leg assembly
“LOCKS” into place.
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com
WARNING: LEGS AND ANKLES MUST BE SUCURELY LOCKED
INTO PLACE BEFORE INVERTING. DO NOT INVERT IF THIS
LOCKING MECHANISM IS NOT FUNCTIONING PROPERLY
Photos may be different than actual product
15
USAGE GUIDELINES- How to Invert
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com
Photos may be
different than
actual product
16
Health Gear is a licensed Trademark and
Distributed By:
Extreme Products Group
6635 W. Happy Valley Rd
Suite A-104, #213
Phoenix, AZ 85310
Technical Support Voicemail: 623-888-6379
Calls will be returned in the order they were received
Fax: 623-434-9100
Email: service@extremeproductsgroup.com
For All parts requests, please do not call our
Technical service number but visit our web
site at www.extremeproductsgroup.com
* For Any Parts Required, DO NOT CALL TECHNICAL SUPPORT. Please visit our web site: www.extremeproductsgroup.com
Loading...