Extreme Networks IdentiFi 3600 Datasheet
DATA SHEET
IdentiFi 3600 Indoor
Access Point
Fully Featured, Enterprise-Grade Wi-Fi
Product Overview
The AP3600 series was the first 802.11abgn indoor access point in the industry to
support 3x3 MIMO 11n performance using existing 802.3af power investments. This
access point is designed to operate in enterprise environments that require alwayson connectivity. The AP3600 Series is equally adept at serving high-bandwidth
video applications as well as low-latency voice applications. The AP3610 comes
with an integrated six antenna array for ease of installation.
The AP3600 platform supports dynamic radio management, spectrum analysis,
self-forming and self-healing meshing, security, role-based authentication,
authorization, and access control. The 3x3:2 platform is capable of delivering
600Mbps over-the-air-performance and up to 50,000 packets per second on the
wire port.
AP3610 Indoor Access Point – Data Sheet 1
PRODUCT FEATURES AP3610
GENERAL
High performance enterprise class AP √
Number of radios 2
MIMO implementation for high performance 11n throughputs 3x3
Number of spatial streams 2
Maximum Throughput Per Radio / Total 300Mbps/600Mbps
Wired performance in packets per second (pps) 50,000 pps
Number of SSIDs supported per radio / total 8/16
Simultaneous users per radio / total 127/254
Simultaneous Voice calls (802.11b, G711, R>80) 12
Mode of operation Semi-autonomous
Plug and play operation/Zero touch deployment √
Security and Standards
MULTIPLE OPERATING MODES
Clients serving access points √
Intelligent thin AP Encryption, Security, QoS and RF management done on AP
Bridging data trac at AP and/or at controller simultaneously √
Simultaneous RF monitoring and client services √
Multi-channel WIDS Sensor-mode
Multi-channel WIPS Sensor-mode
Remote access point √
RF spectrum analysis Sensor-mode
Self-forming and self-healing meshing √
RADIO CHARACTERISTICS
Max transmit power
Radio 1 (5GHz) 22 dBm
Radio 2 (2.4GHz) 23 dBm
Max antenna gain (integrated antenna)
Radio 1 (5GHz) 6 dBi
Radio 2 (2.4GHz) 3 dBi
ADAPTIVE RADIO MANAGEMENT
Dynamic Channel Control 802.11h: DFS & TPC support (ETSI)
Ecient use of the spectrum with a multi-channel architecture √
Automatic transmit power and channel control √
Self-healing with coverage gap detection √
Band steering with multiple steering modes √
Spectrum load balancing of clients √
Airtime fairness √
Performance protection in congested RF environments √
Mitigates co-channel interference with coordinated access √
QOS FOR APPLICATIONS
Quality of Service (WMM, 802.11e) √
Call Admission Control (TSPEC) √
Power Save (U-APSD) √
Fast secure roaming and handover between APs √
Pre-Authentication (Pre-Auth) √
Opportunistic Key Caching (OKC) √
Support voice, video and data using the same SSID √
WPA, WPA2 (AES), 802.11i, 802.1x, IPSec, IKEv2, PKCS #10, X509 DER / PKCS
(Note: maximum transmit power is defined by local regulatory requirement
combined with antenna type)
#12
AP3610 Indoor Access Point – Data Sheet 2
Loading...