Extreme Garage HV-20SS Owner's Manual

1

20″HIGH VELOCITY

FLOOR FAN WITH SHROUD

MODEL HV-20SS

OWNER’S MANUAL

2

READ AND SAVE THESE INSTRUCTIONS.

CAUTION:

Read and follow all instructions before Operating Fan.

Do not use fan if any parts are damaged or missing.

WARNING:

To reduce the risk of fire or electrical shock, do not expose to water or rain.

To reduce the risk of fire or electrical shock, do not use this fan with any solid state speed control device.

RULES FOR SAFE OPERATION:

z Never insert fingers or any other objects through the grille guard when fan is in operation.

z Disconnect the fan when moving from one location to another.

z Disconnect the fan when removing guards for cleaning.

z Be sure fan is on a stable, flat surface when in operation.

z DO NOT use fan in windows. Rain and moisture may create electrical hazard.

CAUTION:

Do not alter the Fan’s assembly.

WARNING:

Be sure FRONT and REAR GUARD screws are completely screwed down in locking position before operation.

TUBE BASE ASSEMBLY INSTRUCTIONS

1. Remove the two screws, lock washers and flat washers from V shape tube,

keep for using later.

2. Slide one end of V shape tube to the end of fan tube with smaller hole.

3. Second, slide another end of V shape tube to

the end of fan tube with bigger hole.

4. Align these holes and secure with the two screws,

lock washers and flat washers removed at Step. 1. ( See figure 1)

NOTE: The screws must be fully tightened before operating the fan.

OPERATING INSTRUCTIONS

TO ADJUST AIRFLOW UPWARD OR DOWNWARD:

Tilt fan head to the desired angle. This high velocity fan can be

used alone or in conjunction with air conditioning. Rotating the fan head upward serves to pull air from the floor and circulate it

throughout the entire room.

How To Adjust Tilt

1. Insert knob to tilt nut.

2. Use knob to loosen tilt nut by turning counter-clockwise.

3. Adjust fan head to tilt you want.

4. Tighten the tilt nut by turning clockwise.

5. Keep knob for future use.

Figure. 1

HIGH VELOCITY FLOOR FAN OPERATING INSTRUCTIONS

Tilt Nut Knob