Exterrain TURON AIR 2 User Manual

2 Man Tent

Model No. TURON AIR 2

USER MANUAL

For safety and care of this product,

please read this user manual carefully before initial use

eXterrain reserves the right to revise the manual at any time. Information and specifications within this manual
are subject to change without notice. eXterrain assumes no liability or responsibility for any errors or
omissions. Please consult eXterrain for any clarification or information regarding this item.

Packaging:

Please ensure that the following items are included in your package:

-1 x Tent

- Storage/carry bag

- 8 x Iron pegs

- 4 x two-way alloy pegs

- 8 x glow in the dark rings

- Peg storage bag

- 4 x Glow in the dark guy ropes attached to tent

- Manual Pump - 2L per stroke

- 1 x repair patch

Dimensions:

3050mm

1250mm

1100mm

Instructions

Choose a flat surface to pitch tent. Remove the tent from the carry bag.

Inflating

1. Lay and unfold the 2 person tent evenly and peg down base of tent using iron pegs..

2. Screw on all main valves properly.

3. Unscrew cap to pump.

4. Begin to inflate tent at valve points using manual pump provided.

5. Pump tent making sure to lift the pump handle to its full extension and its complete

close. Until tent is fully inflated, assist air poles. DO NOT over inflate – pump only

enough air to hold tent up.

6. Screw cap on valve point/s.

7. Place 2 glow rings on alloy pegs.

8. Unroll guy ropes at all points and peg them down using alloy pegs on a 45˚ angle.

9. Tighten, but do not over tighten guy ropes; this can lead to the distortion of the tents’

shape.