Extend EXS-125 Operation & Maintenance Manual
1
EXS-125 AUTOMATIC STRAP MACHINE
OPERATION
＆
MAINTENANCE MANUAL
2
SAFETY INSTRUCTIONS
Read these safety instructions before operating the machine
Read the operation and maintenance manual and all safety instructions on machines
carefully.
Wear glasses and gloves before operating machines, don’t wear loose clothes.
Don’t put belt or rope on any part of your body.
Heater plate reaches about 380℃, don’t touch it!!
Don’t change parts freeform.
Cut off the power supply while machine is stopping or getting maintenance.
Don’t wash the machine with water.
Don’t touch any swiveling part of machine.
Don’t put your hand into arch area when machine is working.
Don’t touch motor when power is not cut off so as to avoid electric shock.
Don’t put your hand on heater arm or fan when machine is working.
Please follow the manual to use machine, or we will not be in charge of any results that
caused by it.
3
Content
Chapter 1 Explanation and Specification ---------------------------------------------- 1
Chapter 2 Safety Instruction ------------------------------------------------------------- 2
Chapter 3 Switches --------------------------------------------------------------------- 3 ~
4
Chapter 4 Preparation For Operation --------------------------------------------- 5 ~ 7
Chapter 5 Operation ----------------------------------------------------------------------- 8
Chapter 6 Stop Operation ---------------------------------------------------------------- 9
Chapter 7 At. Coil Completion ---------------------------------------------------------- 9
Chapter 8 Shutting Down --------------------------------------------------------------- 10
Chapter 9 Steps to Clean Strap Power---------------------------------------------- 11 ~ 12
Chapter 10 Repair and Maintenance ------------------------------------------------- 13
Chapter 11 Adjustment ------------------------------------------------------------ 14 ~ 15
Chapter 12 Trouble Shooting ----------------------------------------------------- 16 ~ 19
1
Chapter 1 Explanation and Specification
STRAP WIDTH
5 ㎜, 6 ㎜
SPEED
50 STRAPS/MIN
POWER SUPPLY
100,110,220,240V., 50/60HZ.., 1-PHASE
POWER CONSUMPTION
0.5 KW
MACHINE TENSION
3 – 30 KGS
MACHINE DIMENSION
995 ㎜(W)×640 ㎜(D)×1400 ㎜(H)
MACHINE WEIGHT
176 KGS
Explanation
This machine is a strapping machine that automatically applies a strap to an object.
The following accessories are attached to the machine.
Operation Manual 1 set: Manual for safe and proper operation, including (This
Manual)
Tool 1 set: To be used for simple maintenance, cleaning, etc.
Warning: Do not use the attached tools, for modifying the machine.
Warning: Do not attempt maintenance or repair of the machine until power source has
been disconnected and locked out.
Specification
Chapter 2 Safety Instruction
2
Never touch the running belts, as
It may catch you hurt
Electric shock may strike you if you
Touch the e lectric b ox , tran sformer,
Motor or any electric parts while the
Power is not switch off.
Heater become over
380℃.never
touch heater plate
and heater cover
otherwise you may be hurt
You ma y be c au gh t to h ur t
If you put your finger or hand
below the heater arm while operating
Chapter 3 Switches
3
POWER SWITCH
POWER LAMP
STOP BUTTON
STRAP BACK BUTTON
TENSION DIAL
START BUTTON
4
TEMP. ADJUSTMENT
COOLING TIME
AUTO/MANUAL SWITCH
Symbol
Name
Function
Power Switch
The machine gets on by revolve the switch clockwise
And the power lamp starts blinking. When the warming
By the heater complete, the lamp become glowing to
Show that the operation is ready,(in approx.20 seconds).
When the switch is revolved anti-clockwise the machine
get OFF
Start Button
This switch has 3roles.
To set new strap
To start strapping.
To return the cam shaft to the origin and set strap in the
arch.
Strap back switch
Use this switch to keep this switch ON until the strap is
back
Little or is out of the machine
Caution:
Exhausted strap shall be manually rewound to
The coil or cut and throw away before retread it.
Otherwise, loose strap may be intertwined
Tension dial
To adjust tightening stroke,
Strap is tightened strong by turning right.
Strap is loosened strong by turning left.
Stop switch
The machine stop strapping when press the button
Power lamp
To show that the machine get on
Loading...