Extech Instruments RHT510-NIST User manual

Hygro-Thermometer

Model RHT510

USER MANUAL

Additional User Manual Translations available at

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

www. .com

[e-mail]1.800.561.8187

2

Introduction

Thank you for selecting the Extech Model RHT510. This hand-held device measures Relative
Humidity, Air temperature, Dew point temperature, Wet bulb temperature, and Type K
temperature (using external probe). This device is shipped fully tested and calibrated and, with
proper use, will provide years of reliable service. Please visit our website ( ) to
check for the latest version and translations of this User Manual, Product Updates, Product
Registration, and Customer Support.

Features

• Backlit LCD with Display Hold

• Light weight, ergonomic design with lanyard

• Displays Relative Humidity and Temperature (Air, Type-K, Dew point, and Wet bulb)

• Selectable temperature units C/F

• MAX-MIN Recording

• Tripod Mounting

• Battery operated

Safety

Please read the entire User Manual and Quick Start before operating this device. Use the meter
only as specified and do not attempt to service or open the meter housing. Do not allow children
to handle the meter. Please dispose of batteries and meter responsibly and in accordance with
all applicable laws and regulations.

RHT510-en-GB_V1.0 5/17

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

www. .com

[e-mail]1.800.561.8187

3

Meter Description

1. Air Temperature/Humidity Sensor

2. Type K Temperature Probe Input

3. LCD Display

4. ON-OFF button

5. ▲ button

6. Mode button

7. Backlight button

8. SET and ▼ button

9. Record button (MAX-MIN)

10. Display Hold button

Note: Battery compartment and tripod mount on back of meter

LCD Description

1. Type K Temperature Icon

2. Function Icons

3. MAX-MIN Record Icon

4. MAX Display Icon

5. MIN Display Icon

6. Display Hold Icon

7. Battery Status Indicator

8. Auto Power OFF (APO)

9. Primary Display

10. Secondary Display

RHT510-en-GB_V1.0 5/17

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

www. .com

[e-mail]1.800.561.8187

4

Operation

Basic Use

1. Short press the power button to power the meter. If the LCD does not switch on, check

the batteries located in the rear battery compartment.

2. Place the sensor in the testing environment.

3. View the measurement on the meter’s display.

4. To power OFF the meter, short press the

Mode Selection

Press the M button to select the mode of operation. The meter has four (4) modes: Relative
Humidity %, Dew point temperature, Wet bulb temperature and Type K temperature (external
probe required). Release the M button to make a selection.

Display Hold

Short press the H button to freeze or unfreeze a reading on the display. The Display Hold and
APO functions are not operational in record mode.

LCD Backlight

The LCD is equipped with backlighting for easier viewing, especially in dimly lit areas. Press the

backlight button to turn the backlight on. The backlight will automatically turn off after 10

seconds.

Type K Measurement

Insert the optional Type K temperature probe into the Type K temperature probe socket (left
side of meter). Use the mode (M) button to set the mode of operation to Type K temperature
and view the readings on the display.

button.

MAX-MIN Recording

The meter records the maximum and minimum values over time.
Note: Display Hold, Auto Power OFF setup, and the Power button do not function in Record

mode.

1. Press the R button to enter the Record mode. The

display. The maximum and minimum values will be recorded and updated during the
measurement period.

2. Press the R button to display the maximum value recorded over time. The

maximum value will appear on the display.

3. Press the R button to display minimum value recorded over time. The icon and minimum

value will appear on the display.

4. Press the H button to reset the recorded data. The previously recorded MAX-MIN readings

will be cleared and the meter will start recording new MAX-MIN readings.

5. Long press the R button to exit the record mode.

record icon will appear on the

icon and

RHT510-en-GB_V1.0 5/17

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

www. .com

[e-mail]1.800.561.8187

5

Auto Power OFF Control

In order to conserve battery life, the meter will automatically shut off after approximately 10
minutes of inactivity. The APO icon appears in the display when APO is selected.

To set APO ON or OFF as the default condition:

1. Long press SET button to enter APO mode. The bottom display will show ‘PoFF’.

2. Press the ▲ or ▼ button to turn the APO ON (YES) or APO OFF (NO).

3. Press the R button to save the selection.

4. Wait approximately 10 seconds for the meter to return to normal operation.

Temperature Units Selection (C/F)

1. Long press SET button. The bottom display will show ‘PoFF’.

2. Press the R button. The bottom display will show t-CF’.

3. Press the ▲ or ▼ button to select C or F.

4. Press the R button to save the selection.

5. Wait approximately 10 seconds for the meter to return to normal operation.

Maintenance

Battery Replacement

1. Power OFF the meter.

2. Remove the flat head screw that secures the battery compartment at the back of the

meter.

3. Open the battery compartment and replace the 3 AAA batteries observing correct polarity.

Re-assemble the meter before use.

Safety: Please dispose of batteries responsibly; never dispose of batteries in a fire, batteries may
explode or leak. If the meter is not to be used for 60 days or more, remove the batteries and store
separately.

Never dispose of used batteries or rechargeable batteries in household waste.
As consumers, users are legally required to take used batteries to appropriate collection
sites, the retail store where the batteries were purchased, or wherever batteries are
sold.

Disposal: Do not dispose of this instrument in household waste. The user is obligated to
take end-of-life devices to a designated collection point for the disposal of electrical and
electronic equipment.

Cleaning and Storage

Periodically wipe the case with a damp cloth and mild detergent; do not use abrasives or
solvents.

RHT510-en-GB_V1.0 5/17

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

www. .com

[e-mail]1.800.561.8187

6

Specifications

Electrical Specifications (23±5°C)

Humidity/Air Temperature

Unit Range Resolution Accuracy

%RH 10 to 95 0.1 <70%: ±(4%RH)

Temp oC 0 to 50 0.1 ±1.2oC

Temp oF 32 to 122 0.1 ±2.5oF

≥70%: ±(4%rdg + 1.2%RH)

Type K Thermocouple (external probe)

Unit Range Resolution Accuracy*

Type K Temp oC

Type K Temp oF

*Accuracy spec. does not include additional error introduced by the external probe

Dew Point Temperature

o

C -25.3 to 49.0 0.1 Calculation based on

o

F -13.5 to 120.0 0.1

-50.0 to 1300.0 0.1 ±(0.4%rdg + 0.5 oC)

-50.1 to -100.0 0.1 ±(0.4%rdg + 1.0 oC)

-58.0 to 2372.0 0.1 ±(0.4%rdg + 1.0

-58.1 to -148.0 0.1 ±(0.4%rdg + 1.8 oF)

humidity/temp values.

o

F)

Wet Bulb Temperature

o

C -5.4 to 49.0 0.1 Calculation based on

o

F 22.2 to 120.0 0.1

humidity/temp values.

RHT510-en-GB_V1.0 5/17

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

www. .com

[e-mail]1.800.561.8187

7

General Specifications

Display Backlit LCD 35 x 30mm (1.38 x 1.18”)

Measurements Humidity/Temp; Dew Point; Wet Bulb; Type K Temp.

Input Overload Display “----“

Tripod Mount On rear panel

Power 1.5V AAA batteries (3)

Power Consumption Approx. 5mA DC

Automatic Power Off After approx. 10 minutes of inactivity

Operating Temperature 0 to 50oC (32 to 122oF)

Operating Humidity 95% RH max

Storage Temperature -10 to 60oC (14 to 140oF)

Storage Humidity 10 to 75% RH

Dimensions/Weight 153 x 45 x 20mm (6.0 x 1.8 x 1.2”) /160g (5.64oz)

Copyright © 2017 FLIR Systems, Inc.

All rights reserved including the right of reproduction in whole or in part in any form

ISO 9001 Certified

RHT510-en-GB_V1.0 5/17

Find Quality Products Online at: [e-mail]

www.GlobalTestSupply.com

www. .com

[e-mail]1.800.561.8187