User Manual
Camera Probes
Models HDV7C-55–HD-1 and HDV7C-49–
DUAL-1. For use with the HDV700
VideoScope.
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Introduction
1. HDV700 connector
2. Probe
3. Probe head
4. HD camera lens and worklights
The probes covered in this manual are designed for use with the
HDV700 High Definition VideoScope. The probes are controlled by
the touch-screen icons on the HDV700.
The HDV700 user manual and additional translations of this probe
manual are available from the support site
Probe Descriptions
The probes are described in the following sections, see the Specifications and Safety sections for additional information.
The HDV700 offers many useful features including capturing still
images and video, changing camera views, and controlling worklights; please refer to the HDV700 user manual for complete
information.
HDV7C-55–HD–1 HD Camera Probe
The HD camera probe head is 0.2 in. (5.5 mm) in diameter and its
probe length is 3.3 ft. (1 m). The camera resolution is 1280 x 720.
Find Quality Products Online at: sales@GlobalTestSupply.com
#NAS100129; r. AC/88004/88004; en-US
www.GlobalTestSupply.com
1
1. HDV700 connector
2. Probe
3. Side view camera and worklights
4. Forward view camera
1. Align the white dot on the probe connector with the white dot on
the HDV700 connector.
2. Plug the probe into the HDV700, ensuring proper alignment and
full insertion.
3. Tighten the collar nut to secure the connection. Do not
overtighten.
HDV7C-49–DUAL-1 Dual HD Camera Probe
The dual HD camera probe head is 0.19 in. (4.9 mm) in diameter
and its probe length is 3.3 ft. (1 m). The camera resolution is 1280 x
720.
Connecting the Probe
The steps below explain how to safely connect the probe to the
HDV700 monitor. Always turn the HDV700 power off before replacing the probe.
Find Quality Products Online at: sales@GlobalTestSupply.com
#NAS100129; r. AC/88004/88004; en-US
www.GlobalTestSupply.com
2
Safety
CAUTION
Do not insert the probe into flammable liquid or gas.
This product is designed for industrial use only. It is not intended for use in human or other biological inspection.
CAUTION
To clean the probe, wipe with a soft cloth dampened with a mild detergent and
clean water. Do not use abrasives, corrosives (alcohol), or solvents to clean
the probe. Use a high quality lens cleaning fluid and a lint-free swab to clean
the camera and worklight lenses.
Do not disassemble the product, damage to the product and electrical shock
may occur.
Avoid direct sun exposure. Store in a cool, dry, and well-ventilated area.
The probe contains sensitive circuitry that controls
the optics and electronics of the camera. Do not
strike the probe or allow it to impact objects
forcefully.
Immerse probes only in approved liquids (see the
Specifications section).
Safety Note
Please read and understand all safety cautions before use.
Find Quality Products Online at: sales@GlobalTestSupply.com
#NAS100129; r. AC/88004/88004; en-US
www.GlobalTestSupply.com
3
Specifications
Camera resolution 1280 (H) x 720 (V) pixels
Frame rate 30 frames per second (fps), approximately
Probe Diameter
Field of View
Depth of Field 0.4 to 4.0 in (10 to 100 mm)
Probe tip length
Probe length 3.3 ft (1 m)
Side-view camera HDV7C-49–DUAL-1 only
LED Worklights Worklights are controlled from the HDV700
Operating temperature 14 to 140℉ (–10 to 60℃)
Storage temperature –4 to 140℉ (-20 to 60℃)
Relative Humidity 10 to 95 % non-condensing
Approved liquids for digital camera probes
Ingress rating
0.2 in. (5.5 mm) for HDV7C-55–HD-1
0.19 in. (4.9 mm) for HDV7C-49–DUAL-1
90°
0.78 in. (20 mm) for HDV7C-55–HD-1
0.85 in. (21.6 mm) for HDV7C-49–DUAL-1
Four forward worklights on HDV7C-55–HD-1
Five forward and one side worklight on HDV7C49–DUAL-1
Approved for use in brake and transmission fluid,
diesel fuel, unleaded gasoline, engine oil, and
CPC hydraulic fluid (46AWS).
Probe tip and body: IP 67 (IEC 60529)
Protected from submersion in water up to 3.3 ft (1
m) for 30 minutes maximum. In use: rain,
splashes, and accidental submersion
#NAS100129; r. AC/88004/88004; en-US
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
4
Two-Year Warranty
FLIR Systems, Inc. warrants this Extech brand instrument to
be free of defects in parts and workmanship for two years from
date of shipment (a six-month limited warranty applies to sensors
and cables).
#NAS100129; r. AC/88004/88004; en-US
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
5
Loading...