Extech Instruments MA3000 Series, CA3000 Series, PQ2071 Catalog Page

33

MA3000 Series

CAT IV True RMS
3000A AC Flex
Clamp Meters

Flexible clamp jaw easily
wraps around bus bars and
cable bundles that may
be difficult to access with
regular clamp meters

• True RMS for accurate readings

• Flexible clamp cable length:
Model MA3010 — 10" (25.4cm)
Model MA3018 — 18" (45.7cm)

• 0.3" (7.5mm) cable diameter;

0.51" (13mm) tip diameter

• Autoranging AC Current

• Data Hold

• Over range and Low
battery indicator

• Auto Power Off with disable

• Complete with two
AAA batteries

CA3000 Series*

3000A AC Flex
Clamp Adaptors

Expand your meter’s
capabilities to measure AC
Current up to 3000A

• Flexible clamp cable length:
Model CA3010 — 10" (25.4cm)
Model CA3018 — 18" (45.7cm)

• 0.3" (7.5mm) cable diameter;

0.51" (13mm) tip diameter

• AC Current in three ranges

• Easy twist clamp cable
closure to Lock or Open

• Compatible with most
meters with standard sized
banana plug inputs

• Battery capacity indicator
provides battery condition

• Complete with built-in flex
clamp cable, 6.6ft (2m)
lead with banana plugs,
and two AAA batteries

PQ2071 1-Phase

and 3-Phase
CAT IV 1000A AC
Power Clamp
Meter

Functions including Power
and Current; USB interface

• True/Apparent/Reactive
Power, plus Power Factor,
Active Power and Phase
Angle (see

p. 61 for details)

• AC+DC µA Current with 10nA
resolution for flame rod tests

• Built-in non-contact Voltage
Detector with LED alert

• Store/recall up to 99 data sets

• Data Hold, Max/Min
and Auto Power Off

• Software for data analysis

• Complete with test leads,
USB cable, PC software, 9V
battery, and carrying case

ÿ MA3010 ÿ |þ MA3018 ÿ ÿ CA3010 |þ CA3018

PQ2071

ÿ SPECIFICATIONS

Yes — Yes True RMS

3000 count LCD display (backlit) — 9999 count LCD with bargraph (backlit) Display counts

ÿ 10" (25.4cm) |

þ

18" (45.7cm) ÿ 10" (25.4cm) |þ18" (45.7cm) 2.2" (55mm); 1000MCM Jaw size/Cable size

0 to 30.00A, 30.00 to 300.0A, 300.0 to 3000A 30.00A (100mV per Amp output);

300.0A (10mV per Amp output);
3000A (1mV per Amp output)

1000A AC Current

———DCCurrent

0.01A 0.01A 100mA Max resolution
±(3%+5 digits) ±3%FS (45 to 500Hz) ±3%rdg Basic ACA Accuracy (% rdg)
— — 750V (0.1V) AC Voltage (Max Res.)
— — — DC Voltage (Max Res.)
— — — Resistance (Max Res.)
— — — Capacitance (Max Res.)
— — 50Hz to 200Hz (1Hz) Frequency (Max Res.)
———Temperature
— — Yes Diode/Continuity
CAT IV-600V , CAT III-1000V *CAT IV-600V , CAT III-1000V CAT III-1000V; CAT IV-600V Category Rating
UL, CE UL, CE CE UL/CE

ÿ

11x4.7x1" (280x120x25mm)/ 6oz (170g);

þ

13.8x5.1x1" (350x130x25mm)/ 7.1oz (200g)

ÿ 11x4.7x1" (280x120x25mm)/ 6oz (170g);

þ

13.8x5.1x1" (350x130x25mm)/ 7.1oz (200g)

11.5x3.75x1.5" (292x95x38mm)/18.4oz

(522g)

Dimensions/ Weight

1 year 1 year 1 year Warranty

*CA3010 & CA 3018 adaptors are CAT III­1000V, CAT IV-600V and should only be used
with multimeters and clamp meters that have
equivalent CAT ratings

CAT IV High Current & Power Clamp Meters/Adaptors