Extech MA260 Specifications

MA260 CAT IV True RMS 200A
AC Open Jaw Clamp Meter
Easy-to-use, one button, Auto Sense technology allows meter to recognize the input being measured and will automatically switch to the correct mode of operation. Its convenient Open Jaw design provides quick measurements in tight locations. True RMS provides accurate readings.
Features
Smart Auto Sensing technology enables the meter to
recognize the input and automatically switch to the
correct mode of operation
For AC Voltage, Auto Sense feature evaluates input
signal and adjusts Input Impedance to eliminate effects
of ghost voltages
0.6" (16mm) open jaw size
True RMS for accurate readings of noisy, distorted
or non-sinusoidal waveforms
Built-in non-contact voltage detector with LED indicator
10,000 count backlit LCD display
Smart Data Hold freezes the reading on the display
and automatically changes if a new reading is larger
than 50 counts
Auto Power Off with disable
Battery capacity (%) displayed on power-up
Slim housing construction with built-in test lead holders
Complete with test leads and two AAA batteries
Specifications
AC Current 200A 0.1A ±3.0%
AC Voltage 1.3V to 1000V 0.1V ±0.9%
DC Voltage 2.1V to 1000V 0.1V ±0.3%
Non-contact Voltage (NCV) 80 to 1000V AC (50 to 60Hz)
Resistance (Ω) 0 to 10kΩ ±0.9%
Input Impedance 6kΩ up to 30V; Increases to 420kΩ at 1000V
Diode 0.4 to 0.8V 0.1V ±1.0%
Continuity Beeper (25Ω threshold)
Dimensions 7.6 x 2.1 x 1.2" (193 x 54 x 31mm)
Weight 9.9oz (280g)
Range Max Resolution Basic Accuracy
PRODUCT DATASHEETPRODUCT DATASHEET
Ordering
MA260 N ........ CAT IV True RMS 200A AC Open Jaw Clamp Meter
N Indicates products that are available with optional calibration traceable to NIST. Order with -NIST after part number for product plus Calibration Certificate.
Specifications subject to change without notice. Copyright © 2015 FLIR Systems, Inc. All rights reserved including the right of reproduction in whole or in part in any form. Rev. 6/9/15
UPC Code: 793950382608
www.extech.com
Loading...