Extech MA130 Instruction Manual

USER MANUAL

200A AC Mini Clamp
Meter

Model MA130

Please visit www.extech.com for user

manual translations

MA130-en-GB_V1.0 10/16

2

Introduction

Thank you for selecting the Extech Instruments 200A AC
Mini Clamp Meter. The MA130 measures AC Current in
three ranges 2A, 20A, and 200A.

This device is shipped fully tested and calibrated and, with
proper use, will provide years of reliable service. Please
visit our website (www.extech.com) to check for the
latest version of this User Manual, Translations, Product
Updates, Product Registration, and Customer Support.

Features

• Measures AC Current in three manually selectable

ranges 2A, 20A, and 200A

• 2000 count Backlit LCD display

• Data Hold freezes displayed reading

• MAX function shows highest reading

• Compact 17mm (0.7") jaw size

• Low battery indicator and Auto Power Off feature

• CAT II-600V and CAT III-300V safety rating

Safety Information

To ensure the safe operation and service of the meter,
follow these instructions closely. Failure to observe
warnings can result in severe injury.

WARNINGS

WARNINGS identify hazardous conditions and
actions that could cause BODILY HARM or DEATH.

 Use the meter only as specified in this User Manual to

avoid compromising the protections provided by the
meter.

 Be sure to use the switch positions, and ranges when

taking measurements.

 Do not use clamp meter on a circuit with voltages

higher than 600V.

 Use caution working with voltages above 30 VAC

RMS, 42 VAC peak, or 60 VDC. These voltages pose a
shock hazard.

 To avoid misleading readings that could lead to

electric shock and injury, replace the batteries as
soon as the low battery indicator is displayed.

MA130-en-GB_V1.0 10/16

3

 Do not use the meter in the presence of explosive gas

or vapor.

 To reduce risk of fire or electric shock, do not use the

meter if it is wet and do not expose the meter to
moisture.

 Individual protective equipment should be used if

HAZARDOUS LIVE parts in the installation where
measurements are to be carried out could be
accessible.

CAUTIONS

CAUTIONS identify conditions and actions that
could cause

DAMAGE to the meter or equipment under test. Do
not expose the meter to extremes in temperature
or high humidity.

 Do not expose the meter to extremes in temperature

or to high humidity.

Safety Symbols that are typically marked
on meters and instructions

This symbol, adjacent to another
symbol, indicates the user must refer
to the manual or user guide for
further information.

Risk of electrical shock

Equipment protected by double or
reinforced insulation

Battery symbol
Conforms to EU directives

Do not discard this product in
household trash

AC measurement

Earth ground