Pocket Moisture Meter
Large Dual Graphical LCD
Displays moisture in wood and other building materials
Features:
• 2-in-1 Digital LCD readout and analog bargraph
• Use on wall board, sheet rock, cardboard, plaster,
concrete, and mortar
• Self-contained, pocket sized meter with belt clip
• Replaceable threaded measurement electrode pins
• Impact proof housing
• Auto power off conserves battery energy
• Battery operated for on-the-go measurements
• Built-in battery check and measurement verification test
• Complete with protective cap, replacement pins,
and three CR-2032 button batteries
Ordering Information:
MO210............Pocket Moisture Meter
MO200-PINS ..Replacement pins (50 pins)
www.extech.com
Measures Moisture of wood and
building materials. Built-in battery
check and measurement verification
test to insure accurate readings
Specifications
Wood Moisture Range 6 to 44%
Basic Accuracy ±1%
Other Building Materials 0.2 to 2.0%
Basic Accuracy ±0.1%
Measurement principle Electrical resistance
Electrode length 0.3" (8mm)
Electrode pins Integrated, replaceable
Auto Power Off After approx. 15 minutes
Operating Temperature 32 to 104°F (0 to 40°C)
Operating Humidity 85% Relative Humidity maximum
Power supply Three CR-2032 button cells
Dimensions 5.1 x 1.6 x 1.0" (130 x 40 x 25mm)
Weight 3.5 oz (100g)
Specifications subject to change without notice.
Copyright © 2007-2008 Extech Instruments Corporation. All rights reserved including the right of reproduction in whole or in part in any form.
9/19/11 - R1